BDS 7" Coilover Lift Kit (2007-2015 Tundra 2WD/4WD) (813F) BDS 7" Coilover Lift Kit (2007-2015 Tundra 2WD/4WD) (813F) BDS Suspension BDS Suspension 7" Coil-over Suspension Lift kit for the 2007-2015 Toyota Tundra 4WD & 2007-2014 Tundra 2WD Pickups. Through a collaborative effort between BDS Suspension and Fox Racing, BDS offers this 7" Toyota Tundra suspension system featuring Fox 2.5" coil-over remote reservoir shocks. This system has been rigorously tested to maximize travel and performance on and off the pavement. This system utilizes BDS proven design standards including one-piece front & rear crossmembers coupled with precision machined ductile cast iron steering knuckles. The steering knuckles are designed to work within the factory traction control constraints and provide stock-like handling characteristics. The knuckles are also considerably more robust in both the mass and strength categories over the rather light-duty stock components. The BDS High Clearance crossmembers are built from 1/4" laser cut steel and maximize ground clearance and strength. The relocated differential is protected by a skid plate tying the crossmemember together. The system also includes new sway bar links to correct the sway bar geometry. The rear of the kit comes all the components necessary to level the truck and center the axle in the wheel well. This includes a 4" block, u-bolts and brake line relocation brackets. BDS by Fox 2.0 series rear shocks come standard in this system. Nothing complements this BDS Suspension better than the race proven design of Fox 2.5" remote reservoir coil-over front shocks. These have been specifically engineered to fit the BDS Suspension system and feature an external reservoir for increased oil cooling capacity and nitrogen volume for a more consistent and comfortable ride. These have also been pre-set by BDS to the correct ride height for an easy installation, but can also be fined tuned to your liking. Note: Components displayed in images may change based upon selections. Important Kit Notes 1. Requires frame bracket modification and welding on 4WD models.2. Stock 18" wheels CANNOT be installed. Factory 20" wheels with more than 6.25" backspacing CANNOT be installed.3. Models with two piece rear drive line would require rear drive shaft modification.4. When kit is installed on 2WD models the differential brackets will not be used.7. Models equipped with 6 piston calipers require modification. Specifications Lift HeightFront (Base Kit):7 in Coil-Over SystemRear (Base Kit):4 in Block Kit Tire and Wheel Combinations35 x 12.50 with 18x9 and 5-1/2" backspacing35 x 12.50 with 20x9 and 5-1/2" backspacing37 x 12.50 with 20x9 and 6-1/4" backspacing*Trimming may be required* Vehicle Fitment Data Make Model Year Range Toyota Tundra 2WD 2007-2015 Toyota Tundra 4WD 2007-2015 Installation Difficulty Level (1 easy â 5 complicated): 3Estimated Installation Time (hours): 8 InstructionsPDF (click here) Base Kit Components Qty Part# Description (1) 018409 07-09 Tundra Rear (1) 028700 07-09 Tundra Box 1 Of 5 (1) 028701 07-09 Tundra Box 2 Of 5 (1) 028702 07-09 Tundra Box 3 Of 5 (1) 028703 07-09 Tundra Box 4 Of 5 (1) 128700 07-16 Tundra Fox C/O Mounting Kit (1) 88302057 Kit: BDS 07-20 Toyota Tundra Front Coilo (2) 98224952 Fox 2.0 Shock 29.85 x 18.25 x 2- S50/EB1 *Subject to change based upon selections

BDS 7" Coilover Lift Kit (2007-2015 Tundra 2WD/4WD) (813F)

Code: 813F
$4,495.69
In Stock
  • FREE SHIPPING

  • 30 DAY RETURNS

  • LIVE SUPPORT

BDS Suspension 7" Coil-over Suspension Lift kit for the 2007-2015 Toyota Tundra 4WD & 2007-2014 Tundra 2WD Pickups.

Through a collaborative effort between BDS Suspension and Fox Racing, BDS offers this 7" Toyota Tundra suspension system featuring Fox 2.5" coil-over remote reservoir shocks. This system has been rigorously tested to maximize travel and performance on and off the pavement.

This system utilizes BDS proven design standards including one-piece front & rear crossmembers coupled with precision machined ductile cast iron steering knuckles. The steering knuckles are designed to work within the factory traction control constraints and provide stock-like handling characteristics. The knuckles are also considerably more robust in both the mass and strength categories over the rather light-duty stock components.

The BDS High Clearance crossmembers are built from 1/4" laser cut steel and maximize ground clearance and strength. The relocated differential is protected by a skid plate tying the crossmemember together. The system also includes new sway bar links to correct the sway bar geometry.
The rear of the kit comes all the components necessary to level the truck and center the axle in the wheel well. This includes a 4" block, u-bolts and brake line relocation brackets. BDS by Fox 2.0 series rear shocks come standard in this system.

Nothing complements this BDS Suspension better than the race proven design of Fox 2.5" remote reservoir coil-over front shocks. These have been specifically engineered to fit the BDS Suspension system and feature an external reservoir for increased oil cooling capacity and nitrogen volume for a more consistent and comfortable ride. These have also been pre-set by BDS to the correct ride height for an easy installation, but can also be fined tuned to your liking.

Note: Components displayed in images may change based upon selections.

Important Kit Notes

1. Requires frame bracket modification and welding on 4WD models.
2. Stock 18" wheels CANNOT be installed. Factory 20" wheels with more than 6.25" backspacing CANNOT be installed.
3. Models with two piece rear drive line would require rear drive shaft modification.
4. When kit is installed on 2WD models the differential brackets will not be used.
7. Models equipped with 6 piston calipers require modification.

Specifications

Lift Height
Front (Base Kit):7 in Coil-Over System
Rear (Base Kit):4 in Block Kit

Tire and Wheel Combinations
35 x 12.50 with 18x9 and 5-1/2" backspacing
35 x 12.50 with 20x9 and 5-1/2" backspacing
37 x 12.50 with 20x9 and 6-1/4" backspacing
*Trimming may be required*

Vehicle Fitment Data

Make Model Year Range
Toyota Tundra 2WD 2007-2015
Toyota Tundra 4WD 2007-2015


Installation

Difficulty Level (1 easy â 5 complicated): 3
Estimated Installation Time (hours): 8

Instructions
PDF (click here)

Base Kit Components

Qty Part# Description
(1) 018409 07-09 Tundra Rear
(1) 028700 07-09 Tundra Box 1 Of 5
(1) 028701 07-09 Tundra Box 2 Of 5
(1) 028702 07-09 Tundra Box 3 Of 5
(1) 028703 07-09 Tundra Box 4 Of 5
(1) 128700 07-16 Tundra Fox C/O Mounting Kit
(1) 88302057 Kit: BDS 07-20 Toyota Tundra Front Coilo
(2) 98224952 Fox 2.0 Shock 29.85 x 18.25 x 2- S50/EB1

*Subject to change based upon selections

BDS Suspension 7" Coil-over Suspension Lift kit for the 2007-2015 Toyota Tundra 4WD & 2007-2014 Tundra 2WD Pickups.

Through a collaborative effort between BDS Suspension and Fox Racing, BDS offers this 7" Toyota Tundra suspension system featuring Fox 2.5" coil-over remote reservoir shocks. This system has been rigorously tested to maximize travel and performance on and off the pavement.

This system utilizes BDS proven design standards including one-piece front & rear crossmembers coupled with precision machined ductile cast iron steering knuckles. The steering knuckles are designed to work within the factory traction control constraints and provide stock-like handling characteristics. The knuckles are also considerably more robust in both the mass and strength categories over the rather light-duty stock components.

The BDS High Clearance crossmembers are built from 1/4" laser cut steel and maximize ground clearance and strength. The relocated differential is protected by a skid plate tying the crossmemember together. The system also includes new sway bar links to correct the sway bar geometry.
The rear of the kit comes all the components necessary to level the truck and center the axle in the wheel well. This includes a 4" block, u-bolts and brake line relocation brackets. BDS by Fox 2.0 series rear shocks come standard in this system.

Nothing complements this BDS Suspension better than the race proven design of Fox 2.5" remote reservoir coil-over front shocks. These have been specifically engineered to fit the BDS Suspension system and feature an external reservoir for increased oil cooling capacity and nitrogen volume for a more consistent and comfortable ride. These have also been pre-set by BDS to the correct ride height for an easy installation, but can also be fined tuned to your liking.

Note: Components displayed in images may change based upon selections.

Important Kit Notes

1. Requires frame bracket modification and welding on 4WD models.
2. Stock 18" wheels CANNOT be installed. Factory 20" wheels with more than 6.25" backspacing CANNOT be installed.
3. Models with two piece rear drive line would require rear drive shaft modification.
4. When kit is installed on 2WD models the differential brackets will not be used.
7. Models equipped with 6 piston calipers require modification.

Specifications

Lift Height
Front (Base Kit):7 in Coil-Over System
Rear (Base Kit):4 in Block Kit

Tire and Wheel Combinations
35 x 12.50 with 18x9 and 5-1/2" backspacing
35 x 12.50 with 20x9 and 5-1/2" backspacing
37 x 12.50 with 20x9 and 6-1/4" backspacing
*Trimming may be required*

Vehicle Fitment Data

Make Model Year Range
Toyota Tundra 2WD 2007-2015
Toyota Tundra 4WD 2007-2015


Installation

Difficulty Level (1 easy â 5 complicated): 3
Estimated Installation Time (hours): 8

Instructions
PDF (click here)

Base Kit Components

Qty Part# Description
(1) 018409 07-09 Tundra Rear
(1) 028700 07-09 Tundra Box 1 Of 5
(1) 028701 07-09 Tundra Box 2 Of 5
(1) 028702 07-09 Tundra Box 3 Of 5
(1) 028703 07-09 Tundra Box 4 Of 5
(1) 128700 07-16 Tundra Fox C/O Mounting Kit
(1) 88302057 Kit: BDS 07-20 Toyota Tundra Front Coilo
(2) 98224952 Fox 2.0 Shock 29.85 x 18.25 x 2- S50/EB1

*Subject to change based upon selections

IMPORTANT COVID-19 NOTE: 
Our warehouses are open and continuing to ship orders. However, please note that nearly all automotive parts manufacturers, distribution centers, and logistics centers face backorders and delays in order fulfillment.
 
If an item is unexpectedly out of stock or delayed,  Trident Trucks will make an effort to notify the customer, provide order status updates, and expedite the fulfillment process. If you have any questions pertaining to your order status, please use the Contact link above. We thank you for your patience and understanding.
 
Product Availability

To check stock levels, use our Live-Chat feature or Contact page. See the Lead Times tab for average order fulfillment times by manufacturer.

Note that some items ship directly from the manufacturer. For these items, the manufacturer may not provide real-time inventory data to Trident Trucks and backorders are possible. If an item is unavailable, Trident Trucks will contact the buyer with an estimated ship date. In the event of excessive manufacturer backorders or delays, Trident Trucks may opt to cancel the order and provide a full refund.

Shipping

Trident Trucks provides shipping within the contiguous 48 states only. For orders outside of this area, please use the Contact page prior to placing your order. Items shipped by ground or LTL generally arrive within 1-5 days from date of shipment. Trident Trucks is not responsible for carrier shipping delays.

Returns & Refunds

Items in their original condition may be returned within 30 days from the date of purchase for a full refund. Items may NOT be returned once packaging has been opened or the item has been installed, otherwise used, or damaged. The buyer is responsible for all return shipping charges. Returns and refunds may be requested through the Contact page.

Note: Do NOT ship items back until you have received a return authorization, as items may be returned to a facility other than their point of origin. Refunds will generally be processed within 48 business hours of receipt at our warehouse in order to allow for inspection and processing.

Product Data
Trident Trucks provides product data (including but not limited to item descriptions, important notes, and fitment information) as a courtesy only. This information is provided by product manufacturers and is assumed to be accurate at the time of publishing. Though Trident Trucks may periodically audit and update some product information based upon manufacturer's published data revisions, Trident Trucks does not guarantee the accuracy of any product data. Trident Trucks reserves the right to update product data as necessary and without notice, and will not be held responsible for misprints, or changes/variations made by vehicle manufacturers. Customers should consult the product manufacturer's website for the most up-to-date product data.
 
Markdown & Open Box Items
Markdown and Open Box items are offered at a discount as they have either been overstocked, slightly damaged, and/or returned from a previous customer. Items are sold "as-is." Trident Trucks will indicate any damage found during the inspection process. Please note that this does not guarantee that all defects have been identified. Sales for all items in this category are final. No refunds, exchanges, or replacements are permitted. Some manufacturers may continue to warranty such items; however, the purchaser accepts that some manufacturers may not extend warranties to items in this category. Please refer to the individual product manufacturer's warranty page for details.

F.A.Q.
How do I request a return?
Use the Contact page, ensuring to include your order number, contact information, items for return, and reason for return. One of our team members will contact you with return shipping details and instructions. Additional information and documentation may be required.
Note: Some items must be returned directly to the manufacturer. Please do not ship items to Trident Trucks prior to return authorization and return instructions.

How do I request a replacement for a missing or damaged part?
Upon receipt, please inspect all orders for completion, accuracy, and damage. If packaging appears to be damaged, ensure to photograph the damage, as this may be required for a shipping carrier claim.
Use the Contact page, ensuring to include your order number, contact information, and description of the incorrect or damaged part(s). One of our team members will contact you to correct the issue.

What product warranties doesTrident Trucks offer?
Product warranties are solely offered by product manufacturers. Please refer to the product manufacturer's warranty statement. In the event of a warranty claim,Trident Trucks is available to assist with the manufacturer's required documentation. Please use the Contact page if assistance is required.
Estimated order processing times for in-stock items.
To check stock levels, use our Live-Chat feature or Contact page.
 
 Manufacturer Estimated Lead Time
BDS Suspension
1-2 Days
Morimoto 1-2 Days
ReadyLIFT Suspensions 1-7 Days
Rough Country 1-2 Days
Zone Offroad 1-2 Days