BDS 4" Lift Kit (2017-2019 Chevy/GMC Colorado/Canyon) (745H) BDS 4" Lift Kit (2017-2019 Chevy/GMC Colorado/Canyon) (745H) BDS Suspension This 4" ZR2 system builds on the tried and true design of BDS's lift systems for the standard Colorado to take advantage of the FMVSSS No.126 (ESC System) compliant Colorado kit components and build them into the new ZR2 setup. Up front this 4" system utilizes a pair of 1/4" thick one-piece laser cut steel high clearance crossmembers to reposition the longer travel A-arms along with a multipoint differential relocation system to securely position the front axle and keep CV axle angles at a minimum. Tying everything together is a heavy duty full width belly skid plate that creates a stout subframe and improves offroad protection whether you are charging through the open desert of out on a backcountry trail. A pair of CNC-machined ductile iron steering knuckles are supplied to reposition steering tie rod mount points and integrate with the larger ball joints from the ZR2 A-arms. Top mounted strut spacers are supplied to correctly position the DSSV coilovers to set ride height and achieve clearance throughout suspension travel. At 4" of lift on the ZR2 the front driveline angles begin to be a issue. To correct this BDS supplies a transfer case indexing ring to rotate the transfer case and improve front driveshaft operating angle to allow the re-installation of the factory driveshafts. Out back BDS supplies a 4" block and u-bolt kit to replace the factory block to level the stance of the Colorado ZR2 while retaining ride quality. Additionally a pair of axle mounted shock relocation brackets are supplied, specially designed for the ZR2 to allow integration with the factory DSSV shocks. As with all BDS suspension lifts, these new Chevy Colorado ZR2 4" lift systems are backed by Factory Protection Plus giving you the confidence to use it and abuse it out on the trail. Take your ZR2 to the next level with BDS Suspension. Note: Components displayed in images may change based upon selections. Important Kit Notes 1. Will fit gas and diesel models2. Inner Fender trimming required3. Minor welding required4. Electronic assisted steering system is sensitive to out of round, unbalanced, and more aggressive tread pattern tires. High speed steering wheel feedback can occur.5. Stock 17" and 18" wheels cannot be reinstalled with the lift kit. Aftermarket 20" wheels with a maximum 5.25" backspacing are recommended. Certain wheel and tire combinations will require weld on steering stops, these are included in the kit. See end of instructions sheet for details on installation. Specifications Lift HeightFront (Base Kit):4" in High Clearance IFS SystemRear (Base Kit):4" in BlockTire and Wheel Combinations35x12.50 with 20 x 9 and 5.25" backspacing35x12.50 with 17x9 or 18x9 and 4.5" backspacing*Trimming may be required* Vehicle Fitment Data Make Model Type Lift Year Range Chevy / GMC Colorado/Canyon Colorado ZR2 4" 2017-2019 Installation Difficulty Level (1 easy â 5 complicated): 4Estimated Installation Time (hours): 8 InstructionsPDF (click here) Base Kit Components Qty Part# Description (1) 021400 2017-18 Colorado ZR2 Box Kit 1of5 (1) 021401 2017-18 Colorado ZR2 Box Kit 2of5 (1) 021402 2017-18 Colorado ZR2 Box Kit 3of5 (1) 021403 2017-18 Colorado ZR2 Box Kit 4of5 (1) 021404 2017-18 Colorado ZR2 Box Kit 5of5 *Subject to change based upon selections

BDS 4" Lift Kit (2017-2019 Chevy/GMC Colorado/Canyon) (745H)

Code: 745H
$2,229.45
In Stock
Add to Wishlist Add to Compare
  • SEE DISCOUNT AT CHECKOUT PAGE

  • FREE SHIPPING ON ALL ORDERS

  • 30 DAY RETURNS (SEE ORDER POLICES)

This 4" ZR2 system builds on the tried and true design of BDS's lift systems for the standard Colorado to take advantage of the FMVSSS No.126 (ESC System) compliant Colorado kit components and build them into the new ZR2 setup. Up front this 4" system utilizes a pair of 1/4" thick one-piece laser cut steel high clearance crossmembers to reposition the longer travel A-arms along with a multipoint differential relocation system to securely position the front axle and keep CV axle angles at a minimum. Tying everything together is a heavy duty full width belly skid plate that creates a stout subframe and improves offroad protection whether you are charging through the open desert of out on a backcountry trail. A pair of CNC-machined ductile iron steering knuckles are supplied to reposition steering tie rod mount points and integrate with the larger ball joints from the ZR2 A-arms. Top mounted strut spacers are supplied to correctly position the DSSV coilovers to set ride height and achieve clearance throughout suspension travel. At 4" of lift on the ZR2 the front driveline angles begin to be a issue. To correct this BDS supplies a transfer case indexing ring to rotate the transfer case and improve front driveshaft operating angle to allow the re-installation of the factory driveshafts.

Out back BDS supplies a 4" block and u-bolt kit to replace the factory block to level the stance of the Colorado ZR2 while retaining ride quality. Additionally a pair of axle mounted shock relocation brackets are supplied, specially designed for the ZR2 to allow integration with the factory DSSV shocks. As with all BDS suspension lifts, these new Chevy Colorado ZR2 4" lift systems are backed by Factory Protection Plus giving you the confidence to use it and abuse it out on the trail. Take your ZR2 to the next level with BDS Suspension.

Note: Components displayed in images may change based upon selections.

Important Kit Notes

1. Will fit gas and diesel models
2. Inner Fender trimming required
3. Minor welding required
4. Electronic assisted steering system is sensitive to out of round, unbalanced, and more aggressive tread pattern tires. High speed steering wheel feedback can occur.
5. Stock 17" and 18" wheels cannot be reinstalled with the lift kit. Aftermarket 20" wheels with a maximum 5.25" backspacing are recommended. Certain wheel and tire combinations will require weld on steering stops, these are included in the kit. See end of instructions sheet for details on installation.

Specifications

Lift Height
Front (Base Kit):4" in High Clearance IFS System
Rear (Base Kit):4" in Block

Tire and Wheel Combinations
35x12.50 with 20 x 9 and 5.25" backspacing
35x12.50 with 17x9 or 18x9 and 4.5" backspacing
*Trimming may be required*

Vehicle Fitment Data

Make Model Type Lift Year Range
Chevy / GMC Colorado/Canyon Colorado ZR2 4" 2017-2019


Installation

Difficulty Level (1 easy â 5 complicated): 4
Estimated Installation Time (hours): 8

Instructions
PDF (click here)

Base Kit Components

Qty Part# Description
(1) 021400 2017-18 Colorado ZR2 Box Kit 1of5
(1) 021401 2017-18 Colorado ZR2 Box Kit 2of5
(1) 021402 2017-18 Colorado ZR2 Box Kit 3of5
(1) 021403 2017-18 Colorado ZR2 Box Kit 4of5
(1) 021404 2017-18 Colorado ZR2 Box Kit 5of5

*Subject to change based upon selections

This 4" ZR2 system builds on the tried and true design of BDS's lift systems for the standard Colorado to take advantage of the FMVSSS No.126 (ESC System) compliant Colorado kit components and build them into the new ZR2 setup. Up front this 4" system utilizes a pair of 1/4" thick one-piece laser cut steel high clearance crossmembers to reposition the longer travel A-arms along with a multipoint differential relocation system to securely position the front axle and keep CV axle angles at a minimum. Tying everything together is a heavy duty full width belly skid plate that creates a stout subframe and improves offroad protection whether you are charging through the open desert of out on a backcountry trail. A pair of CNC-machined ductile iron steering knuckles are supplied to reposition steering tie rod mount points and integrate with the larger ball joints from the ZR2 A-arms. Top mounted strut spacers are supplied to correctly position the DSSV coilovers to set ride height and achieve clearance throughout suspension travel. At 4" of lift on the ZR2 the front driveline angles begin to be a issue. To correct this BDS supplies a transfer case indexing ring to rotate the transfer case and improve front driveshaft operating angle to allow the re-installation of the factory driveshafts.

Out back BDS supplies a 4" block and u-bolt kit to replace the factory block to level the stance of the Colorado ZR2 while retaining ride quality. Additionally a pair of axle mounted shock relocation brackets are supplied, specially designed for the ZR2 to allow integration with the factory DSSV shocks. As with all BDS suspension lifts, these new Chevy Colorado ZR2 4" lift systems are backed by Factory Protection Plus giving you the confidence to use it and abuse it out on the trail. Take your ZR2 to the next level with BDS Suspension.

Note: Components displayed in images may change based upon selections.

Important Kit Notes

1. Will fit gas and diesel models
2. Inner Fender trimming required
3. Minor welding required
4. Electronic assisted steering system is sensitive to out of round, unbalanced, and more aggressive tread pattern tires. High speed steering wheel feedback can occur.
5. Stock 17" and 18" wheels cannot be reinstalled with the lift kit. Aftermarket 20" wheels with a maximum 5.25" backspacing are recommended. Certain wheel and tire combinations will require weld on steering stops, these are included in the kit. See end of instructions sheet for details on installation.

Specifications

Lift Height
Front (Base Kit):4" in High Clearance IFS System
Rear (Base Kit):4" in Block

Tire and Wheel Combinations
35x12.50 with 20 x 9 and 5.25" backspacing
35x12.50 with 17x9 or 18x9 and 4.5" backspacing
*Trimming may be required*

Vehicle Fitment Data

Make Model Type Lift Year Range
Chevy / GMC Colorado/Canyon Colorado ZR2 4" 2017-2019


Installation

Difficulty Level (1 easy â 5 complicated): 4
Estimated Installation Time (hours): 8

Instructions
PDF (click here)

Base Kit Components

Qty Part# Description
(1) 021400 2017-18 Colorado ZR2 Box Kit 1of5
(1) 021401 2017-18 Colorado ZR2 Box Kit 2of5
(1) 021402 2017-18 Colorado ZR2 Box Kit 3of5
(1) 021403 2017-18 Colorado ZR2 Box Kit 4of5
(1) 021404 2017-18 Colorado ZR2 Box Kit 5of5

*Subject to change based upon selections

IMPORTANT COVID-19 NOTE: 
Our warehouses are open and continuing to ship orders. However, please note that nearly all automotive parts manufacturers, distribution centers, and logistics centers face backorders and delays in order fulfillment.
 
If an item is unexpectedly out of stock or delayed,  Trident Trucks will make an effort to notify the customer, provide order status updates, and expedite the fulfillment process. If you have any questions pertaining to your order status, please use the Contact link above. We thank you for your patience and understanding.
 
Product Availability

See the Lead Times tab for average order fulfillment times by manufacturer. Note that some items ship directly from the manufacturer. For these items, the manufacturer may not provide real-time inventory data to Trident Trucks and backorders are possible. If an item is unavailable, Trident Trucks will contact the buyer with an estimated in-stock and shipping date. Trident Trucks may issue a full refund in the event of a backordered item.

Shipping

Trident Trucks provides shipping within the continental United States only. For orders outside of this area, please use the Contact page prior to placing your order. Items shipped by ground or LTL generally arrive within 1-5 days from date of shipment. Trident Trucks is not responsible for carrier shipping delays.

Returns & Refunds

Items in their original condition may be returned within 30 days from the date of purchase for a full refund. Items may NOT be returned once packaging has been opened or the item has been installed, otherwise used, or damaged. The buyer is responsible for all return shipping charges. Returns and refunds may be requested through the Contact page.

Note: Do NOT ship items back until you have received a return authorization, as items may be returned to a facility other than their point of origin. Refunds will generally be processed within 48 business hours of receipt at our warehouse in order to allow for inspection and processing.

Product Data
Trident Trucks provides product data (including but not limited to item descriptions, important notes, and fitment information) as a courtesy only. This information is provided by product manufacturers and is assumed to be accurate at the time of publishing. Though Trident Trucks may periodically audit and update some product information based upon manufacturer's published data revisions, Trident Trucks does not guarantee the accuracy of any product data. Trident Trucks reserves the right to update product data as necessary and without notice, and will not be held responsible for misprints, or changes/variations made by vehicle manufacturers. Customers should consult the product manufacturer's website for the most up-to-date product data.
 
Markdown & Open Box Items
Markdown and Open Box items are offered at a discount as they have either been overstocked, slightly damaged, and/or returned from a previous customer. Items are sold "as-is." Trident Trucks will indicate any damage found during the inspection process. Please note that this does not guarantee that all defects have been identified. Sales for all items in this category are final. No refunds, exchanges, or replacements are permitted. Some manufacturers may continue to warranty such items; however, the purchaser accepts that some manufacturers may not extend warranties to items in this category. Please refer to the individual product manufacturer's warranty page for details.

F.A.Q.
How do I request a return?
Use the Contact page, ensuring to include your order number, contact information, items for return, and reason for return. One of our team members will contact you with return shipping details and instructions. Additional information and documentation may be required.
Note: Some items must be returned directly to the manufacturer. Please do not ship items to Trident Trucks prior to return authorization and return instructions.

How do I request a replacement for a missing or damaged part?
Upon receipt, please inspect all orders for completion, accuracy, and damage. If packaging appears to be damaged, ensure to photograph the damage, as this may be required for a shipping carrier claim.
Use the Contact page, ensuring to include your order number, contact information, and description of the incorrect or damaged part(s). One of our team members will contact you to correct the issue.

What product warranties doesTrident Trucks offer?
Product warranties are solely offered by product manufacturers. Please refer to the product manufacturer's warranty statement. In the event of a warranty claim,Trident Trucks is available to assist with the manufacturer's required documentation. Please use the Contact page if assistance is required.
Estimated manufacturer order processing times for in-stock items.
 
 Manufacturer Estimated Lead Time
BDS Suspension 1 Week
Rough Country 1-2 Days
Zone Offroad 1-2 Days