BDS 5.5" Lift Kit (2015-2019 Chevy/GMC Colorado/Canyon) (722H) BDS 5.5" Lift Kit (2015-2019 Chevy/GMC Colorado/Canyon) (722H) BDS Suspension BDS Suspension 5.5" Suspension Lift Kit System for 2015-19 Chevy/GMC Colorado/Canyon 4WD pickup trucks. The new BDS Suspension 5.5" suspension system is design with our tried-and-true steering knuckle and crossmember technology. The system has passed FMVSS126 testing for stability control compliance. Heavy-duty fabricated crossmembers drop the lower control arms, perfectly matching the massive ductile cast iron extended steering knuckles to gain 5.5" of lift. The crossmembers utilize the factory alignment eccentrics and tie together with a full-width skid plate. The skid plate protects the relocated differential that has been lowered and positioned to work precisely with the included transfer case indexing ring, allowing for the factory front drive shaft to be used. The factory front struts are relocated using upper strut extensions that do not require disassembly of the strut. Front bump stop extension and sway bar links are included as well as new Moog tie rod ends to properly set alignment without trimming the inner tie rods. In the rear, as simple block/u-bolt combination sets the new ride height so it is level with the front. Fox 2.0 or NX2 series rear shocks are available to finish out the back. Choose between the custom valved NX2 series or the BDS by Fox 2.0 series gas charged monotube rear shocks. Note: Components displayed in images may change based upon selections. Important Kit Notes 1. Inner fender trimming required2. Minor welding required3. Electronic assisted power steering system is sensitive to out of round, unbalanced, and more aggressive tread pattern tires. High speed steering wheel feedback can occur4. Stock 17" & 18" wheels can not be reinstalled with the lift kit. Aftermarket 20" wheels with maximum of 5.25" Backspacing are recommended - certain wheel and tire combinations will require weld on steering stops, these are included in the kit. See end of inst. sheet for details on installation.5. Will not fit ZR2 Models.6. Will fit diesel models. Specifications Lift HeightFront (Base Kit):5.5" in High Clearance IFS SystemRear (Base Kit):4" in Block Tire and Wheel Combinations305/55R20 with 20 x 9 and 5.25" backspacing305/70R17 with 17x9 or 18x9 and 4.5" backspacing295/70R17 with 17x8 or 18x8 and 4.5" backspacing*Trimming may be required* Vehicle Fitment Data Make Model Lift Year Range Chevy / GMC Colorado/Canyon 5.5" 2015-2019 Installation Difficulty Level (1 easy â 5 complicated): 4Estimated Installation Time (hours): 8 InstructionsPDF (click here) Base Kit Components Qty Part# Description (1) 011406 2015 Colorado 4" Rear Block Box Kit (1) 021670 2015 Colorado Front Box Kit 1of4 (1) 021671 2015 Colorado Front Box Kit 2of4 (1) 021672 2015 Colorado Front Box Kit 3of4 (1) 021673 2015 Colorado Front Box Kit 4of4 (1) 021674 2015 Colorado 5.5" Strut Spacer Box Kit (2) 85758 NX2 Shock Absorber *Subject to change based upon selections

BDS 5.5" Lift Kit (2015-2019 Chevy/GMC Colorado/Canyon) (722H)

Code: 722H
$2,188.60
In Stock
  • FREE SHIPPING

  • 30 DAY RETURNS

  • LIVE SUPPORT

BDS Suspension 5.5" Suspension Lift Kit System for 2015-19 Chevy/GMC Colorado/Canyon 4WD pickup trucks.
The new BDS Suspension 5.5" suspension system is design with our tried-and-true steering knuckle and crossmember technology. The system has passed FMVSS126 testing for stability control compliance. Heavy-duty fabricated crossmembers drop the lower control arms, perfectly matching the massive ductile cast iron extended steering knuckles to gain 5.5" of lift.
The crossmembers utilize the factory alignment eccentrics and tie together with a full-width skid plate. The skid plate protects the relocated differential that has been lowered and positioned to work precisely with the included transfer case indexing ring, allowing for the factory front drive shaft to be used.
The factory front struts are relocated using upper strut extensions that do not require disassembly of the strut. Front bump stop extension and sway bar links are included as well as new Moog tie rod ends to properly set alignment without trimming the inner tie rods.
In the rear, as simple block/u-bolt combination sets the new ride height so it is level with the front. Fox 2.0 or NX2 series rear shocks are available to finish out the back.

Choose between the custom valved NX2 series or the BDS by Fox 2.0 series gas charged monotube rear shocks.

Note: Components displayed in images may change based upon selections.

Important Kit Notes

1. Inner fender trimming required
2. Minor welding required
3. Electronic assisted power steering system is sensitive to out of round, unbalanced, and more aggressive tread pattern tires. High speed steering wheel feedback can occur
4. Stock 17" & 18" wheels can not be reinstalled with the lift kit. Aftermarket 20" wheels with maximum of 5.25" Backspacing are recommended - certain wheel and tire combinations will require weld on steering stops, these are included in the kit. See end of inst. sheet for details on installation.
5. Will not fit ZR2 Models.
6. Will fit diesel models.

Specifications

Lift Height
Front (Base Kit):5.5" in High Clearance IFS System
Rear (Base Kit):4" in Block

Tire and Wheel Combinations
305/55R20 with 20 x 9 and 5.25" backspacing
305/70R17 with 17x9 or 18x9 and 4.5" backspacing
295/70R17 with 17x8 or 18x8 and 4.5" backspacing
*Trimming may be required*

Vehicle Fitment Data

Make Model Lift Year Range
Chevy / GMC Colorado/Canyon 5.5" 2015-2019


Installation

Difficulty Level (1 easy â 5 complicated): 4
Estimated Installation Time (hours): 8

Instructions
PDF (click here)

Base Kit Components

Qty Part# Description
(1) 011406 2015 Colorado 4" Rear Block Box Kit
(1) 021670 2015 Colorado Front Box Kit 1of4
(1) 021671 2015 Colorado Front Box Kit 2of4
(1) 021672 2015 Colorado Front Box Kit 3of4
(1) 021673 2015 Colorado Front Box Kit 4of4
(1) 021674 2015 Colorado 5.5" Strut Spacer Box Kit
(2) 85758 NX2 Shock Absorber

*Subject to change based upon selections

BDS Suspension 5.5" Suspension Lift Kit System for 2015-19 Chevy/GMC Colorado/Canyon 4WD pickup trucks.
The new BDS Suspension 5.5" suspension system is design with our tried-and-true steering knuckle and crossmember technology. The system has passed FMVSS126 testing for stability control compliance. Heavy-duty fabricated crossmembers drop the lower control arms, perfectly matching the massive ductile cast iron extended steering knuckles to gain 5.5" of lift.
The crossmembers utilize the factory alignment eccentrics and tie together with a full-width skid plate. The skid plate protects the relocated differential that has been lowered and positioned to work precisely with the included transfer case indexing ring, allowing for the factory front drive shaft to be used.
The factory front struts are relocated using upper strut extensions that do not require disassembly of the strut. Front bump stop extension and sway bar links are included as well as new Moog tie rod ends to properly set alignment without trimming the inner tie rods.
In the rear, as simple block/u-bolt combination sets the new ride height so it is level with the front. Fox 2.0 or NX2 series rear shocks are available to finish out the back.

Choose between the custom valved NX2 series or the BDS by Fox 2.0 series gas charged monotube rear shocks.

Note: Components displayed in images may change based upon selections.

Important Kit Notes

1. Inner fender trimming required
2. Minor welding required
3. Electronic assisted power steering system is sensitive to out of round, unbalanced, and more aggressive tread pattern tires. High speed steering wheel feedback can occur
4. Stock 17" & 18" wheels can not be reinstalled with the lift kit. Aftermarket 20" wheels with maximum of 5.25" Backspacing are recommended - certain wheel and tire combinations will require weld on steering stops, these are included in the kit. See end of inst. sheet for details on installation.
5. Will not fit ZR2 Models.
6. Will fit diesel models.

Specifications

Lift Height
Front (Base Kit):5.5" in High Clearance IFS System
Rear (Base Kit):4" in Block

Tire and Wheel Combinations
305/55R20 with 20 x 9 and 5.25" backspacing
305/70R17 with 17x9 or 18x9 and 4.5" backspacing
295/70R17 with 17x8 or 18x8 and 4.5" backspacing
*Trimming may be required*

Vehicle Fitment Data

Make Model Lift Year Range
Chevy / GMC Colorado/Canyon 5.5" 2015-2019


Installation

Difficulty Level (1 easy â 5 complicated): 4
Estimated Installation Time (hours): 8

Instructions
PDF (click here)

Base Kit Components

Qty Part# Description
(1) 011406 2015 Colorado 4" Rear Block Box Kit
(1) 021670 2015 Colorado Front Box Kit 1of4
(1) 021671 2015 Colorado Front Box Kit 2of4
(1) 021672 2015 Colorado Front Box Kit 3of4
(1) 021673 2015 Colorado Front Box Kit 4of4
(1) 021674 2015 Colorado 5.5" Strut Spacer Box Kit
(2) 85758 NX2 Shock Absorber

*Subject to change based upon selections

IMPORTANT COVID-19 NOTE: 
Our warehouses are open and continuing to ship orders. However, please note that nearly all automotive parts manufacturers, distribution centers, and logistics centers face backorders and delays in order fulfillment.
 
If an item is unexpectedly out of stock or delayed,  Trident Trucks will make an effort to notify the customer, provide order status updates, and expedite the fulfillment process. If you have any questions pertaining to your order status, please use the Contact link above. We thank you for your patience and understanding.
 
Product Availability

To check stock levels, use our Live-Chat feature or Contact page. See the Lead Times tab for average order fulfillment times by manufacturer.

Note that some items ship directly from the manufacturer. For these items, the manufacturer may not provide real-time inventory data to Trident Trucks and backorders are possible. If an item is unavailable, Trident Trucks will contact the buyer with an estimated ship date. In the event of excessive manufacturer backorders or delays, Trident Trucks may opt to cancel the order and provide a full refund.

Shipping

Trident Trucks provides shipping within the contiguous 48 states only. For orders outside of this area, please use the Contact page prior to placing your order. Items shipped by ground or LTL generally arrive within 1-5 days from date of shipment. Trident Trucks is not responsible for carrier shipping delays.

Returns & Refunds

Items in their original condition may be returned within 30 days from the date of purchase for a full refund. Items may NOT be returned once packaging has been opened or the item has been installed, otherwise used, or damaged. The buyer is responsible for all return shipping charges. Returns and refunds may be requested through the Contact page.

Note: Do NOT ship items back until you have received a return authorization, as items may be returned to a facility other than their point of origin. Refunds will generally be processed within 48 business hours of receipt at our warehouse in order to allow for inspection and processing.

Product Data
Trident Trucks provides product data (including but not limited to item descriptions, important notes, and fitment information) as a courtesy only. This information is provided by product manufacturers and is assumed to be accurate at the time of publishing. Though Trident Trucks may periodically audit and update some product information based upon manufacturer's published data revisions, Trident Trucks does not guarantee the accuracy of any product data. Trident Trucks reserves the right to update product data as necessary and without notice, and will not be held responsible for misprints, or changes/variations made by vehicle manufacturers. Customers should consult the product manufacturer's website for the most up-to-date product data.
 
Markdown & Open Box Items
Markdown and Open Box items are offered at a discount as they have either been overstocked, slightly damaged, and/or returned from a previous customer. Items are sold "as-is." Trident Trucks will indicate any damage found during the inspection process. Please note that this does not guarantee that all defects have been identified. Sales for all items in this category are final. No refunds, exchanges, or replacements are permitted. Some manufacturers may continue to warranty such items; however, the purchaser accepts that some manufacturers may not extend warranties to items in this category. Please refer to the individual product manufacturer's warranty page for details.

F.A.Q.
How do I request a return?
Use the Contact page, ensuring to include your order number, contact information, items for return, and reason for return. One of our team members will contact you with return shipping details and instructions. Additional information and documentation may be required.
Note: Some items must be returned directly to the manufacturer. Please do not ship items to Trident Trucks prior to return authorization and return instructions.

How do I request a replacement for a missing or damaged part?
Upon receipt, please inspect all orders for completion, accuracy, and damage. If packaging appears to be damaged, ensure to photograph the damage, as this may be required for a shipping carrier claim.
Use the Contact page, ensuring to include your order number, contact information, and description of the incorrect or damaged part(s). One of our team members will contact you to correct the issue.

What product warranties doesTrident Trucks offer?
Product warranties are solely offered by product manufacturers. Please refer to the product manufacturer's warranty statement. In the event of a warranty claim,Trident Trucks is available to assist with the manufacturer's required documentation. Please use the Contact page if assistance is required.
Estimated order processing times for in-stock items.
To check stock levels, use our Live-Chat feature or Contact page.
 
 Manufacturer Estimated Lead Time
BDS Suspension
1-2 Days
Morimoto 1-2 Days
ReadyLIFT Suspensions 1-7 Days
Rough Country 1-2 Days
Zone Offroad 1-2 Days