BDS 2" Performance Coilover Lift Kit (2019-2022 Dodge/RAM 1500 4WD w/o Air-Ride) (1664F) BDS 2" Performance Coilover Lift Kit (2019-2022 Dodge/RAM 1500 4WD w/o Air-Ride) (1664F) BDS Suspension BDS Suspension ups the anty on the RAM 1500 performance with 2" coilover systems. Designed to be so much more than just a "leveling kit", these new coilover systems take advantage of the factory suspension geometry without overextending operating angles and offer next level performance in a smaller lift package. At the heart of these new 2" systems are a pair of precision tuned FOX 2.5 factory race series remote reservoir coilovers engineered to outperform on and offroad as they soak up the terrain. These coilovers are preset for the correct lift height right out of the box to provide optimal performance and direct bolt-in replacement for the factory strut assemblies. They feature a smooth bore and honed seamless alloy body, 7/8" hardened steel carbon shaft, Eibach coil springs and black anodized machined 6061-T6 billet aluminum mounts along with remove reservoirs optional DSC (dual speed compression) adjustment technology built in. DSC allows for easy adjustment of the vehicle's suspension compression dampening so you can dial in the ideal ride performance to soak up the bumps, both large and small. The DSC has 12 adjustment points for the high speed compression as well as 10 adjustment points for the low speed compression allowing you to make large or small changes to further improve your performance. Adjustments can be made by simply twisting the knobs located on the end of the reservoir. No tools or shop adjustments needed, allowing you to tune the suspension out on the trail. A pair of reservoir mounting brackets are supplied to position the reservoirs above. Complimenting the coilovers are a pair of performance upper control arms (UCAs) designed for improved strength and suspension travel. Built from thick wall 1.5" DOM tubing, these UCAs utilize an indexed ball joint cup to reposition the upper ball joints and allowing more droop travel. These arms come fully assembled right out of the box with high quality greaseable ball joints and rubber bushings for long life, quiet operation and superior corrosion resistance over uniballs and heims. Rounding out these 2" coilover systems are pair of FOX 2.0 performance series IFP gas shocks to compliment the front and complete the package. Important Kit Notes 1. Fits 4WD models only2. Vehicles equipped with "Offroad or Rebel Package" will not achieve full 2" of lift, net ride height change will be around 1" above stock.3. Will not fit vehicle equipped with factory Air Ride.4. 33x12.50 tires cannot be installed on factory wheels due to clearance issue to the UCA. Aftermarket wheels with 33x12.50 tires or stock wheel with narrower tires required. Follow recommended tire/wheel specs.5. Will NOT fit 2019 RAM 1500 Classic models, Refer to the 2018 kit listings.6. Will NOT fit models equipped with the Thermal Axle option. Reference build code DSK-P or check diff cover for cooling lines mounted as circled in reference image (click here for reference image). Specifications Lift HeightFront (base kit): 2" CoiloverRear (base kit): 0" N/A Tire and Wheel Combinations Stock w/Stock and Stock back spacing295/65r w/20x9 and 5" back spacing33x12.50 w/20x9 and 4.5" back spacing*Trimming may be required* Installation Est. Installation: 3 hoursDifficulty Level (easy 1 - 5 complicated): 3 InstructionsClick Here for PDF 1 of 1 Vehicle Fitment Data Make Model Type Year Range Dodge / Ram 1500 Truck 4WD w/o Air-Ride 2019-2022 Base Kit Components These components are subject to change based upon your selections. Qty Part# Description (1) 122253 2006-2021 Ram 1500 UCA Kit - 2-3" Lift H (1) 88402242 Kit: BDS 19-20 Ram 1500 Front Coilover, (2) 98224700 Fox 2.0 Shock 25.65 x 16.05 x 2- S50/EB1

BDS 2" Performance Coilover Lift Kit (2019-2022 Dodge/RAM 1500 4WD w/o Air-Ride) (1664F)

Code: 1664F
$3,113.90
In Stock
  • FREE SHIPPING

  • 30 DAY RETURNS

  • LIVE SUPPORT

BDS Suspension ups the anty on the RAM 1500 performance with 2" coilover systems.

Designed to be so much more than just a "leveling kit", these new coilover systems take advantage of the factory suspension geometry without overextending operating angles and offer next level performance in a smaller lift package. At the heart of these new 2" systems are a pair of precision tuned FOX 2.5 factory race series remote reservoir coilovers engineered to outperform on and offroad as they soak up the terrain. These coilovers are preset for the correct lift height right out of the box to provide optimal performance and direct bolt-in replacement for the factory strut assemblies. They feature a smooth bore and honed seamless alloy body, 7/8" hardened steel carbon shaft, Eibach coil springs and black anodized machined 6061-T6 billet aluminum mounts along with remove reservoirs optional DSC (dual speed compression) adjustment technology built in. DSC allows for easy adjustment of the vehicle's suspension compression dampening so you can dial in the ideal ride performance to soak up the bumps, both large and small. The DSC has 12 adjustment points for the high speed compression as well as 10 adjustment points for the low speed compression allowing you to make large or small changes to further improve your performance. Adjustments can be made by simply twisting the knobs located on the end of the reservoir. No tools or shop adjustments needed, allowing you to tune the suspension out on the trail. A pair of reservoir mounting brackets are supplied to position the reservoirs above. Complimenting the coilovers are a pair of performance upper control arms (UCAs) designed for improved strength and suspension travel. Built from thick wall 1.5" DOM tubing, these UCAs utilize an indexed ball joint cup to reposition the upper ball joints and allowing more droop travel. These arms come fully assembled right out of the box with high quality greaseable ball joints and rubber bushings for long life, quiet operation and superior corrosion resistance over uniballs and heims. Rounding out these 2" coilover systems are pair of FOX 2.0 performance series IFP gas shocks to compliment the front and complete the package.

Important Kit Notes

1. Fits 4WD models only
2. Vehicles equipped with "Offroad or Rebel Package" will not achieve full 2" of lift, net ride height change will be around 1" above stock.
3. Will not fit vehicle equipped with factory Air Ride.
4. 33x12.50 tires cannot be installed on factory wheels due to clearance issue to the UCA. Aftermarket wheels with 33x12.50 tires or stock wheel with narrower tires required. Follow recommended tire/wheel specs.
5. Will NOT fit 2019 RAM 1500 Classic models, Refer to the 2018 kit listings.
6. Will NOT fit models equipped with the Thermal Axle option. Reference build code DSK-P or check diff cover for cooling lines mounted as circled in reference image (click here for reference image).

Specifications

Lift Height
Front (base kit): 2" Coilover
Rear (base kit): 0" N/A

Tire and Wheel Combinations
Stock w/Stock and Stock back spacing
295/65r w/20x9 and 5" back spacing
33x12.50 w/20x9 and 4.5" back spacing
*Trimming may be required*

Installation

Est. Installation: 3 hours
Difficulty Level (easy 1 - 5 complicated): 3

Instructions
Click Here for PDF 1 of 1

Vehicle Fitment Data

Make Model Type Year Range
Dodge / Ram 1500 Truck 4WD w/o Air-Ride 2019-2022

Base Kit Components

These components are subject to change based upon your selections.

Qty Part# Description
(1) 122253 2006-2021 Ram 1500 UCA Kit - 2-3" Lift H
(1) 88402242 Kit: BDS 19-20 Ram 1500 Front Coilover,
(2) 98224700 Fox 2.0 Shock 25.65 x 16.05 x 2- S50/EB1

BDS Suspension ups the anty on the RAM 1500 performance with 2" coilover systems.

Designed to be so much more than just a "leveling kit", these new coilover systems take advantage of the factory suspension geometry without overextending operating angles and offer next level performance in a smaller lift package. At the heart of these new 2" systems are a pair of precision tuned FOX 2.5 factory race series remote reservoir coilovers engineered to outperform on and offroad as they soak up the terrain. These coilovers are preset for the correct lift height right out of the box to provide optimal performance and direct bolt-in replacement for the factory strut assemblies. They feature a smooth bore and honed seamless alloy body, 7/8" hardened steel carbon shaft, Eibach coil springs and black anodized machined 6061-T6 billet aluminum mounts along with remove reservoirs optional DSC (dual speed compression) adjustment technology built in. DSC allows for easy adjustment of the vehicle's suspension compression dampening so you can dial in the ideal ride performance to soak up the bumps, both large and small. The DSC has 12 adjustment points for the high speed compression as well as 10 adjustment points for the low speed compression allowing you to make large or small changes to further improve your performance. Adjustments can be made by simply twisting the knobs located on the end of the reservoir. No tools or shop adjustments needed, allowing you to tune the suspension out on the trail. A pair of reservoir mounting brackets are supplied to position the reservoirs above. Complimenting the coilovers are a pair of performance upper control arms (UCAs) designed for improved strength and suspension travel. Built from thick wall 1.5" DOM tubing, these UCAs utilize an indexed ball joint cup to reposition the upper ball joints and allowing more droop travel. These arms come fully assembled right out of the box with high quality greaseable ball joints and rubber bushings for long life, quiet operation and superior corrosion resistance over uniballs and heims. Rounding out these 2" coilover systems are pair of FOX 2.0 performance series IFP gas shocks to compliment the front and complete the package.

Important Kit Notes

1. Fits 4WD models only
2. Vehicles equipped with "Offroad or Rebel Package" will not achieve full 2" of lift, net ride height change will be around 1" above stock.
3. Will not fit vehicle equipped with factory Air Ride.
4. 33x12.50 tires cannot be installed on factory wheels due to clearance issue to the UCA. Aftermarket wheels with 33x12.50 tires or stock wheel with narrower tires required. Follow recommended tire/wheel specs.
5. Will NOT fit 2019 RAM 1500 Classic models, Refer to the 2018 kit listings.
6. Will NOT fit models equipped with the Thermal Axle option. Reference build code DSK-P or check diff cover for cooling lines mounted as circled in reference image (click here for reference image).

Specifications

Lift Height
Front (base kit): 2" Coilover
Rear (base kit): 0" N/A

Tire and Wheel Combinations
Stock w/Stock and Stock back spacing
295/65r w/20x9 and 5" back spacing
33x12.50 w/20x9 and 4.5" back spacing
*Trimming may be required*

Installation

Est. Installation: 3 hours
Difficulty Level (easy 1 - 5 complicated): 3

Instructions
Click Here for PDF 1 of 1

Vehicle Fitment Data

Make Model Type Year Range
Dodge / Ram 1500 Truck 4WD w/o Air-Ride 2019-2022

Base Kit Components

These components are subject to change based upon your selections.

Qty Part# Description
(1) 122253 2006-2021 Ram 1500 UCA Kit - 2-3" Lift H
(1) 88402242 Kit: BDS 19-20 Ram 1500 Front Coilover,
(2) 98224700 Fox 2.0 Shock 25.65 x 16.05 x 2- S50/EB1

IMPORTANT COVID-19 NOTE: 
Our warehouses are open and continuing to ship orders. However, please note that nearly all automotive parts manufacturers, distribution centers, and logistics centers face backorders and delays in order fulfillment.
 
If an item is unexpectedly out of stock or delayed,  Trident Trucks will make an effort to notify the customer, provide order status updates, and expedite the fulfillment process. If you have any questions pertaining to your order status, please use the Contact link above. We thank you for your patience and understanding.
 
Product Availability

To check stock levels, use our Live-Chat feature or Contact page. See the Lead Times tab for average order fulfillment times by manufacturer.

Note that some items ship directly from the manufacturer. For these items, the manufacturer may not provide real-time inventory data to Trident Trucks and backorders are possible. If an item is unavailable, Trident Trucks will contact the buyer with an estimated ship date. In the event of excessive manufacturer backorders or delays, Trident Trucks may opt to cancel the order and provide a full refund.

Shipping

Trident Trucks provides shipping within the contiguous 48 states only. For orders outside of this area, please use the Contact page prior to placing your order. Items shipped by ground or LTL generally arrive within 1-5 days from date of shipment. Trident Trucks is not responsible for carrier shipping delays.

Returns & Refunds

Items in their original condition may be returned within 30 days from the date of purchase for a full refund. Items may NOT be returned once packaging has been opened or the item has been installed, otherwise used, or damaged. The buyer is responsible for all return shipping charges. Returns and refunds may be requested through the Contact page.

Note: Do NOT ship items back until you have received a return authorization, as items may be returned to a facility other than their point of origin. Refunds will generally be processed within 48 business hours of receipt at our warehouse in order to allow for inspection and processing.

Product Data
Trident Trucks provides product data (including but not limited to item descriptions, important notes, and fitment information) as a courtesy only. This information is provided by product manufacturers and is assumed to be accurate at the time of publishing. Though Trident Trucks may periodically audit and update some product information based upon manufacturer's published data revisions, Trident Trucks does not guarantee the accuracy of any product data. Trident Trucks reserves the right to update product data as necessary and without notice, and will not be held responsible for misprints, or changes/variations made by vehicle manufacturers. Customers should consult the product manufacturer's website for the most up-to-date product data.
 
Markdown & Open Box Items
Markdown and Open Box items are offered at a discount as they have either been overstocked, slightly damaged, and/or returned from a previous customer. Items are sold "as-is." Trident Trucks will indicate any damage found during the inspection process. Please note that this does not guarantee that all defects have been identified. Sales for all items in this category are final. No refunds, exchanges, or replacements are permitted. Some manufacturers may continue to warranty such items; however, the purchaser accepts that some manufacturers may not extend warranties to items in this category. Please refer to the individual product manufacturer's warranty page for details.

F.A.Q.
How do I request a return?
Use the Contact page, ensuring to include your order number, contact information, items for return, and reason for return. One of our team members will contact you with return shipping details and instructions. Additional information and documentation may be required.
Note: Some items must be returned directly to the manufacturer. Please do not ship items to Trident Trucks prior to return authorization and return instructions.

How do I request a replacement for a missing or damaged part?
Upon receipt, please inspect all orders for completion, accuracy, and damage. If packaging appears to be damaged, ensure to photograph the damage, as this may be required for a shipping carrier claim.
Use the Contact page, ensuring to include your order number, contact information, and description of the incorrect or damaged part(s). One of our team members will contact you to correct the issue.

What product warranties doesTrident Trucks offer?
Product warranties are solely offered by product manufacturers. Please refer to the product manufacturer's warranty statement. In the event of a warranty claim,Trident Trucks is available to assist with the manufacturer's required documentation. Please use the Contact page if assistance is required.
Estimated order processing times for in-stock items.
To check stock levels, use our Live-Chat feature or Contact page.
 
 Manufacturer Estimated Lead Time
BDS Suspension
1-2 Days
Morimoto 1-2 Days
ReadyLIFT Suspensions 1-7 Days
Rough Country 1-2 Days
Zone Offroad 1-2 Days