BDS 3" Radius Arm Suspension Lift Kit (2014-2018 RAM 2500 Pickup w/ Rear Coil Springs | 4WD Diesel) (1624H) BDS 3" Radius Arm Suspension Lift Kit (2014-2018 RAM 2500 Pickup w/ Rear Coil Springs | 4WD Diesel) (1624H) BDS Suspension BDS Suspension 2014-2017 Ram 2500 3" Radius Arm Lift System. This kit is perfect for those looking for all the performance of a full-out lift system but with the height of a leveling kit. This new system is built around massive tubular replacement radius arms. These arms are built to handle far more than the factory parts they are replacing. The design incorporates a factory style rubber bushing mount at the frame to keep the NVH levels in check. The 3-1/4" diameter bushings are huge and have a long, maintenance-free service life. The new radius arms mount right into the factory locations so installation is simple and clean. Factory alignment adjustability is maintained using the OE eccentric adjusters. The arm geometry is set to keep the axle angle in the factory specs while compensating for the 3" of lift. A copper-anodized aluminum BDS name plate is mounted each arm. In addition to the heavy-duty, high-performance radius arms, this new system features dual-rate front coil springs that improve the ride and handling of these 3/4 ton trucks both on and off road. Our popular heavy-duty turnbuckle style adjustable track bar is included to center the axle. BDS greaseable front sway bar links reset the sway bar to the optimum angle and round out the main front components. These links utilize spherical polyurethane bushings for increased articulation and performance. Add in the front brake line relocation brackets and a choice of NX2 series or FOX 2.0 Performance Series shocks and this system is set to handle any terrain. The rear system utilizes 1.25" fabricated steel coil spring spacers to level out the stance. A new raised track bar bracket centers up the axle while bump stop extensions and greaseable extended sway bar links (same design as the fronts) round out the rear components. Note: Components displayed in images may change based upon selections. Important Kit Notes 1. Not compatible with factory rear air ride vehicles Specifications Lift HeightFront (Base Kit):3 in Radius ArmRear (Base Kit):2 in Block Kit Tire and Wheel Combinations35" x 12.50 with 17" x 9" and 5" backspacing35" x 12.50" with 18" x 9" and 5" backspacing35" x 12.50" with 20" x 9" and 5" backspacing*Trimming may be required* Vehicle Fitment Data Make Model Type Lift Location Year Range Dodge / Ram 2500 Truck 4WD w/ Rear Coil Springs 3" Front & Rear 2014-2018 Installation Difficulty Level (1 easy â 5 complicated): 3Estimated Installation Time (hours): 5 InstructionsPDF (click here) Base Kit Components Qty Part# Description (1) 012129 14-18 Ram 2500 Rear Box Kit (1) 012311 2013-up Ram 3500 3in Front Box Kit (1) 032302 4" Coil Box Kit (1) 122321 2013-up Ram 2500/3500 Radius Arm Box Kit (2) 85700 BDS NX2 Shock Absorber (2) 85755 BDS NX2 Shock Absorber *Subject to change based upon selections

BDS 3" Radius Arm Suspension Lift Kit (2014-2018 RAM 2500 Pickup w/ Rear Coil Springs | 4WD Diesel) (1624H)

Code: 1624H
$2,196.30
In Stock
  • FREE SHIPPING

  • 30 DAY RETURNS

  • LIVE SUPPORT

BDS Suspension 2014-2017 Ram 2500 3" Radius Arm Lift System.

This kit is perfect for those looking for all the performance of a full-out lift system but with the height of a leveling kit. This new system is built around massive tubular replacement radius arms. These arms are built to handle far more than the factory parts they are replacing. The design incorporates a factory style rubber bushing mount at the frame to keep the NVH levels in check. The 3-1/4" diameter bushings are huge and have a long, maintenance-free service life. The new radius arms mount right into the factory locations so installation is simple and clean. Factory alignment adjustability is maintained using the OE eccentric adjusters. The arm geometry is set to keep the axle angle in the factory specs while compensating for the 3" of lift. A copper-anodized aluminum BDS name plate is mounted each arm.

In addition to the heavy-duty, high-performance radius arms, this new system features dual-rate front coil springs that improve the ride and handling of these 3/4 ton trucks both on and off road. Our popular heavy-duty turnbuckle style adjustable track bar is included to center the axle. BDS greaseable front sway bar links reset the sway bar to the optimum angle and round out the main front components. These links utilize spherical polyurethane bushings for increased articulation and performance. Add in the front brake line relocation brackets and a choice of NX2 series or FOX 2.0 Performance Series shocks and this system is set to handle any terrain.

The rear system utilizes 1.25" fabricated steel coil spring spacers to level out the stance. A new raised track bar bracket centers up the axle while bump stop extensions and greaseable extended sway bar links (same design as the fronts) round out the rear components.

Note: Components displayed in images may change based upon selections.

Important Kit Notes

1. Not compatible with factory rear air ride vehicles

Specifications

Lift Height
Front (Base Kit):3 in Radius Arm
Rear (Base Kit):2 in Block Kit

Tire and Wheel Combinations
35" x 12.50 with 17" x 9" and 5" backspacing
35" x 12.50" with 18" x 9" and 5" backspacing
35" x 12.50" with 20" x 9" and 5" backspacing
*Trimming may be required*

Vehicle Fitment Data

Make Model Type Lift Location Year Range
Dodge / Ram 2500 Truck 4WD w/ Rear Coil Springs 3" Front & Rear 2014-2018


Installation

Difficulty Level (1 easy â 5 complicated): 3
Estimated Installation Time (hours): 5

Instructions
PDF (click here)

Base Kit Components

Qty Part# Description
(1) 012129 14-18 Ram 2500 Rear Box Kit
(1) 012311 2013-up Ram 3500 3in Front Box Kit
(1) 032302 4" Coil Box Kit
(1) 122321 2013-up Ram 2500/3500 Radius Arm Box Kit
(2) 85700 BDS NX2 Shock Absorber
(2) 85755 BDS NX2 Shock Absorber

*Subject to change based upon selections

BDS Suspension 2014-2017 Ram 2500 3" Radius Arm Lift System.

This kit is perfect for those looking for all the performance of a full-out lift system but with the height of a leveling kit. This new system is built around massive tubular replacement radius arms. These arms are built to handle far more than the factory parts they are replacing. The design incorporates a factory style rubber bushing mount at the frame to keep the NVH levels in check. The 3-1/4" diameter bushings are huge and have a long, maintenance-free service life. The new radius arms mount right into the factory locations so installation is simple and clean. Factory alignment adjustability is maintained using the OE eccentric adjusters. The arm geometry is set to keep the axle angle in the factory specs while compensating for the 3" of lift. A copper-anodized aluminum BDS name plate is mounted each arm.

In addition to the heavy-duty, high-performance radius arms, this new system features dual-rate front coil springs that improve the ride and handling of these 3/4 ton trucks both on and off road. Our popular heavy-duty turnbuckle style adjustable track bar is included to center the axle. BDS greaseable front sway bar links reset the sway bar to the optimum angle and round out the main front components. These links utilize spherical polyurethane bushings for increased articulation and performance. Add in the front brake line relocation brackets and a choice of NX2 series or FOX 2.0 Performance Series shocks and this system is set to handle any terrain.

The rear system utilizes 1.25" fabricated steel coil spring spacers to level out the stance. A new raised track bar bracket centers up the axle while bump stop extensions and greaseable extended sway bar links (same design as the fronts) round out the rear components.

Note: Components displayed in images may change based upon selections.

Important Kit Notes

1. Not compatible with factory rear air ride vehicles

Specifications

Lift Height
Front (Base Kit):3 in Radius Arm
Rear (Base Kit):2 in Block Kit

Tire and Wheel Combinations
35" x 12.50 with 17" x 9" and 5" backspacing
35" x 12.50" with 18" x 9" and 5" backspacing
35" x 12.50" with 20" x 9" and 5" backspacing
*Trimming may be required*

Vehicle Fitment Data

Make Model Type Lift Location Year Range
Dodge / Ram 2500 Truck 4WD w/ Rear Coil Springs 3" Front & Rear 2014-2018


Installation

Difficulty Level (1 easy â 5 complicated): 3
Estimated Installation Time (hours): 5

Instructions
PDF (click here)

Base Kit Components

Qty Part# Description
(1) 012129 14-18 Ram 2500 Rear Box Kit
(1) 012311 2013-up Ram 3500 3in Front Box Kit
(1) 032302 4" Coil Box Kit
(1) 122321 2013-up Ram 2500/3500 Radius Arm Box Kit
(2) 85700 BDS NX2 Shock Absorber
(2) 85755 BDS NX2 Shock Absorber

*Subject to change based upon selections

IMPORTANT COVID-19 NOTE: 
Our warehouses are open and continuing to ship orders. However, please note that nearly all automotive parts manufacturers, distribution centers, and logistics centers face backorders and delays in order fulfillment.
 
If an item is unexpectedly out of stock or delayed,  Trident Trucks will make an effort to notify the customer, provide order status updates, and expedite the fulfillment process. If you have any questions pertaining to your order status, please use the Contact link above. We thank you for your patience and understanding.
 
Product Availability

To check stock levels, use our Live-Chat feature or Contact page. See the Lead Times tab for average order fulfillment times by manufacturer.

Note that some items ship directly from the manufacturer. For these items, the manufacturer may not provide real-time inventory data to Trident Trucks and backorders are possible. If an item is unavailable, Trident Trucks will contact the buyer with an estimated ship date. In the event of excessive manufacturer backorders or delays, Trident Trucks may opt to cancel the order and provide a full refund.

Shipping

Trident Trucks provides shipping within the contiguous 48 states only. For orders outside of this area, please use the Contact page prior to placing your order. Items shipped by ground or LTL generally arrive within 1-5 days from date of shipment. Trident Trucks is not responsible for carrier shipping delays.

Returns & Refunds

Items in their original condition may be returned within 30 days from the date of purchase for a full refund. Items may NOT be returned once packaging has been opened or the item has been installed, otherwise used, or damaged. The buyer is responsible for all return shipping charges. Returns and refunds may be requested through the Contact page.

Note: Do NOT ship items back until you have received a return authorization, as items may be returned to a facility other than their point of origin. Refunds will generally be processed within 48 business hours of receipt at our warehouse in order to allow for inspection and processing.

Product Data
Trident Trucks provides product data (including but not limited to item descriptions, important notes, and fitment information) as a courtesy only. This information is provided by product manufacturers and is assumed to be accurate at the time of publishing. Though Trident Trucks may periodically audit and update some product information based upon manufacturer's published data revisions, Trident Trucks does not guarantee the accuracy of any product data. Trident Trucks reserves the right to update product data as necessary and without notice, and will not be held responsible for misprints, or changes/variations made by vehicle manufacturers. Customers should consult the product manufacturer's website for the most up-to-date product data.
 
Markdown & Open Box Items
Markdown and Open Box items are offered at a discount as they have either been overstocked, slightly damaged, and/or returned from a previous customer. Items are sold "as-is." Trident Trucks will indicate any damage found during the inspection process. Please note that this does not guarantee that all defects have been identified. Sales for all items in this category are final. No refunds, exchanges, or replacements are permitted. Some manufacturers may continue to warranty such items; however, the purchaser accepts that some manufacturers may not extend warranties to items in this category. Please refer to the individual product manufacturer's warranty page for details.

F.A.Q.
How do I request a return?
Use the Contact page, ensuring to include your order number, contact information, items for return, and reason for return. One of our team members will contact you with return shipping details and instructions. Additional information and documentation may be required.
Note: Some items must be returned directly to the manufacturer. Please do not ship items to Trident Trucks prior to return authorization and return instructions.

How do I request a replacement for a missing or damaged part?
Upon receipt, please inspect all orders for completion, accuracy, and damage. If packaging appears to be damaged, ensure to photograph the damage, as this may be required for a shipping carrier claim.
Use the Contact page, ensuring to include your order number, contact information, and description of the incorrect or damaged part(s). One of our team members will contact you to correct the issue.

What product warranties doesTrident Trucks offer?
Product warranties are solely offered by product manufacturers. Please refer to the product manufacturer's warranty statement. In the event of a warranty claim,Trident Trucks is available to assist with the manufacturer's required documentation. Please use the Contact page if assistance is required.
Estimated order processing times for in-stock items.
To check stock levels, use our Live-Chat feature or Contact page.
 
 Manufacturer Estimated Lead Time
BDS Suspension
1-2 Days
Morimoto 1-2 Days
ReadyLIFT Suspensions 1-7 Days
Rough Country 1-2 Days
Zone Offroad 1-2 Days