BDS 2.5" Suspension Lift Kit (2019-2020 Ford Ranger 4WD) (1546H) BDS 2.5" Suspension Lift Kit (2019-2020 Ford Ranger 4WD) (1546H) BDS Suspension BDS Suspension adds new 2.5" lift systems to their ever-expanding lineup for the 2019 Ford Ranger. This new system builds off the factory suspension mounting points and offers improved strength, ground clearance and suspension travel. All components have been engineered in unison to ensure suspension and drivetrain geometry is maintained, rather than other " leveling kits" on the market that just throw in a top spacer which maxes out the angles at droop. The new ride height is the result of a combination of a specially designed top mounted steel fabricated strut spacer in conjunction with a preload spacer for a total 2.5" of front lift. The reason for the combination is to achieve the correct ride height without increasing the overall extended length of the strut assembly too the point of causing premature wear of the CV axle boots and other front end components. To further ensure proper drivetrain geometry the front differential is repositioned using relocation brackets. These brackets correct CV axle angle while allowing the use of the factory front skid plates. In the rear the factory shocks are replaced with your choice of precision tuned NX2 gas or FOX 2.0 performance IFP gas shocks for improved damping. Optional accessories include the BDS performance upper control arm (UCA) kit and 1" HD rear shackle kit. All kits come finished in a durable black e-coat finish and sent with all hardware packs to complete the install along with step-by-step installation instructions. All BDS kits include Factory Protection Plus for the ultimate extended warranty to include BDS's No Fine Print Warranty, ESC System compatibility and a 5year-60mile drivetrain warranty to match the dealer. Improve the look and capability of your 2019 Ford Ranger with these new 2.5" lift systems from BDS Suspension. Note: Components displayed in images may change based upon selections. Important Kit Notes 1. Aftermarket wheels must have a minimum of 93.1mm center hub bore.2. Tires wider than 285/70r17 or 285/65r18 cannot be installed on factory wheels due to steering knuckle clearance.3. Strut disassembly required, high quality wall mounted strut compressor and skilled technician recommended Specifications Lift HeightFront (Base Kit):2.5 in Strut Spacer + PreloadRear (Base Kit):N/A Tire and Wheel Combinations285/70r17 with 17" and stock backspacing285/65r18 with 18" and stock backspacing*Trimming may be required* Vehicle Fitment Data Make Model Lift Year Range Ford Ranger 4WD 2.5" 2019-2020 Installation Difficulty Level (1 easy â 5 complicated): 3Estimated Installation Time (hours): 4 InstructionsPDF (click here) Base Kit Components Qty Part# Description (1) 013240 2019 Ford Ranger 2.5" Lift System (2) 85880 Shock- 25.95 x 15.40 x 2 - EB1/EB1 *Subject to change based upon selections

BDS 2.5" Suspension Lift Kit (2019-2020 Ford Ranger 4WD) (1546H)

Code: 1546H
$410.15
In Stock
  • FREE SHIPPING

  • 30 DAY RETURNS

  • LIVE SUPPORT

BDS Suspension adds new 2.5" lift systems to their ever-expanding lineup for the 2019 Ford Ranger.

This new system builds off the factory suspension mounting points and offers improved strength, ground clearance and suspension travel. All components have been engineered in unison to ensure suspension and drivetrain geometry is maintained, rather than other " leveling kits" on the market that just throw in a top spacer which maxes out the angles at droop. The new ride height is the result of a combination of a specially designed top mounted steel fabricated strut spacer in conjunction with a preload spacer for a total 2.5" of front lift. The reason for the combination is to achieve the correct ride height without increasing the overall extended length of the strut assembly too the point of causing premature wear of the CV axle boots and other front end components. To further ensure proper drivetrain geometry the front differential is repositioned using relocation brackets. These brackets correct CV axle angle while allowing the use of the factory front skid plates. In the rear the factory shocks are replaced with your choice of precision tuned NX2 gas or FOX 2.0 performance IFP gas shocks for improved damping.

Optional accessories include the BDS performance upper control arm (UCA) kit and 1" HD rear shackle kit. All kits come finished in a durable black e-coat finish and sent with all hardware packs to complete the install along with step-by-step installation instructions. All BDS kits include Factory Protection Plus for the ultimate extended warranty to include BDS's No Fine Print Warranty, ESC System compatibility and a 5year-60mile drivetrain warranty to match the dealer. Improve the look and capability of your 2019 Ford Ranger with these new 2.5" lift systems from BDS Suspension.

Note: Components displayed in images may change based upon selections.

Important Kit Notes

1. Aftermarket wheels must have a minimum of 93.1mm center hub bore.
2. Tires wider than 285/70r17 or 285/65r18 cannot be installed on factory wheels due to steering knuckle clearance.
3. Strut disassembly required, high quality wall mounted strut compressor and skilled technician recommended

Specifications

Lift Height
Front (Base Kit):2.5 in Strut Spacer + Preload
Rear (Base Kit):N/A

Tire and Wheel Combinations
285/70r17 with 17" and stock backspacing
285/65r18 with 18" and stock backspacing
*Trimming may be required*

Vehicle Fitment Data

Make Model Lift Year Range
Ford Ranger 4WD 2.5" 2019-2020


Installation

Difficulty Level (1 easy â 5 complicated): 3
Estimated Installation Time (hours): 4

Instructions
PDF (click here)

Base Kit Components

Qty Part# Description
(1) 013240 2019 Ford Ranger 2.5" Lift System
(2) 85880 Shock- 25.95 x 15.40 x 2 - EB1/EB1

*Subject to change based upon selections

BDS Suspension adds new 2.5" lift systems to their ever-expanding lineup for the 2019 Ford Ranger.

This new system builds off the factory suspension mounting points and offers improved strength, ground clearance and suspension travel. All components have been engineered in unison to ensure suspension and drivetrain geometry is maintained, rather than other " leveling kits" on the market that just throw in a top spacer which maxes out the angles at droop. The new ride height is the result of a combination of a specially designed top mounted steel fabricated strut spacer in conjunction with a preload spacer for a total 2.5" of front lift. The reason for the combination is to achieve the correct ride height without increasing the overall extended length of the strut assembly too the point of causing premature wear of the CV axle boots and other front end components. To further ensure proper drivetrain geometry the front differential is repositioned using relocation brackets. These brackets correct CV axle angle while allowing the use of the factory front skid plates. In the rear the factory shocks are replaced with your choice of precision tuned NX2 gas or FOX 2.0 performance IFP gas shocks for improved damping.

Optional accessories include the BDS performance upper control arm (UCA) kit and 1" HD rear shackle kit. All kits come finished in a durable black e-coat finish and sent with all hardware packs to complete the install along with step-by-step installation instructions. All BDS kits include Factory Protection Plus for the ultimate extended warranty to include BDS's No Fine Print Warranty, ESC System compatibility and a 5year-60mile drivetrain warranty to match the dealer. Improve the look and capability of your 2019 Ford Ranger with these new 2.5" lift systems from BDS Suspension.

Note: Components displayed in images may change based upon selections.

Important Kit Notes

1. Aftermarket wheels must have a minimum of 93.1mm center hub bore.
2. Tires wider than 285/70r17 or 285/65r18 cannot be installed on factory wheels due to steering knuckle clearance.
3. Strut disassembly required, high quality wall mounted strut compressor and skilled technician recommended

Specifications

Lift Height
Front (Base Kit):2.5 in Strut Spacer + Preload
Rear (Base Kit):N/A

Tire and Wheel Combinations
285/70r17 with 17" and stock backspacing
285/65r18 with 18" and stock backspacing
*Trimming may be required*

Vehicle Fitment Data

Make Model Lift Year Range
Ford Ranger 4WD 2.5" 2019-2020


Installation

Difficulty Level (1 easy â 5 complicated): 3
Estimated Installation Time (hours): 4

Instructions
PDF (click here)

Base Kit Components

Qty Part# Description
(1) 013240 2019 Ford Ranger 2.5" Lift System
(2) 85880 Shock- 25.95 x 15.40 x 2 - EB1/EB1

*Subject to change based upon selections

IMPORTANT COVID-19 NOTE: 
Our warehouses are open and continuing to ship orders. However, please note that nearly all automotive parts manufacturers, distribution centers, and logistics centers face backorders and delays in order fulfillment.
 
If an item is unexpectedly out of stock or delayed,  Trident Trucks will make an effort to notify the customer, provide order status updates, and expedite the fulfillment process. If you have any questions pertaining to your order status, please use the Contact link above. We thank you for your patience and understanding.
 
Product Availability

To check stock levels, use our Live-Chat feature or Contact page. See the Lead Times tab for average order fulfillment times by manufacturer.

Note that some items ship directly from the manufacturer. For these items, the manufacturer may not provide real-time inventory data to Trident Trucks and backorders are possible. If an item is unavailable, Trident Trucks will contact the buyer with an estimated ship date. In the event of excessive manufacturer backorders or delays, Trident Trucks may opt to cancel the order and provide a full refund.

Shipping

Trident Trucks provides shipping within the contiguous 48 states only. For orders outside of this area, please use the Contact page prior to placing your order. Items shipped by ground or LTL generally arrive within 1-5 days from date of shipment. Trident Trucks is not responsible for carrier shipping delays.

Returns & Refunds

Items in their original condition may be returned within 30 days from the date of purchase for a full refund. Items may NOT be returned once packaging has been opened or the item has been installed, otherwise used, or damaged. The buyer is responsible for all return shipping charges. Returns and refunds may be requested through the Contact page.

Note: Do NOT ship items back until you have received a return authorization, as items may be returned to a facility other than their point of origin. Refunds will generally be processed within 48 business hours of receipt at our warehouse in order to allow for inspection and processing.

Product Data
Trident Trucks provides product data (including but not limited to item descriptions, important notes, and fitment information) as a courtesy only. This information is provided by product manufacturers and is assumed to be accurate at the time of publishing. Though Trident Trucks may periodically audit and update some product information based upon manufacturer's published data revisions, Trident Trucks does not guarantee the accuracy of any product data. Trident Trucks reserves the right to update product data as necessary and without notice, and will not be held responsible for misprints, or changes/variations made by vehicle manufacturers. Customers should consult the product manufacturer's website for the most up-to-date product data.
 
Markdown & Open Box Items
Markdown and Open Box items are offered at a discount as they have either been overstocked, slightly damaged, and/or returned from a previous customer. Items are sold "as-is." Trident Trucks will indicate any damage found during the inspection process. Please note that this does not guarantee that all defects have been identified. Sales for all items in this category are final. No refunds, exchanges, or replacements are permitted. Some manufacturers may continue to warranty such items; however, the purchaser accepts that some manufacturers may not extend warranties to items in this category. Please refer to the individual product manufacturer's warranty page for details.

F.A.Q.
How do I request a return?
Use the Contact page, ensuring to include your order number, contact information, items for return, and reason for return. One of our team members will contact you with return shipping details and instructions. Additional information and documentation may be required.
Note: Some items must be returned directly to the manufacturer. Please do not ship items to Trident Trucks prior to return authorization and return instructions.

How do I request a replacement for a missing or damaged part?
Upon receipt, please inspect all orders for completion, accuracy, and damage. If packaging appears to be damaged, ensure to photograph the damage, as this may be required for a shipping carrier claim.
Use the Contact page, ensuring to include your order number, contact information, and description of the incorrect or damaged part(s). One of our team members will contact you to correct the issue.

What product warranties doesTrident Trucks offer?
Product warranties are solely offered by product manufacturers. Please refer to the product manufacturer's warranty statement. In the event of a warranty claim,Trident Trucks is available to assist with the manufacturer's required documentation. Please use the Contact page if assistance is required.
Estimated order processing times for in-stock items.
To check stock levels, use our Live-Chat feature or Contact page.
 
 Manufacturer Estimated Lead Time
BDS Suspension
1-2 Days
Morimoto 1-2 Days
ReadyLIFT Suspensions 1-7 Days
Rough Country 1-2 Days
Zone Offroad 1-2 Days