BDS Suspension 3" Lift Kit (2007-2011 Jeep Wrangler JK & RHD 2 Door 4WD - Standard Jeep or Rubicon) (1423H) BDS Suspension 3" Lift Kit (2007-2011 Jeep Wrangler JK & RHD 2 Door 4WD - Standard Jeep or Rubicon) (1423H) BDS Suspension Specifically intended for 2007-11 models, this system includes an exhaust extension kit that maximizes allowable wheel travel with the factory front driveshaft. This kit comes with 3" Pro-Ride Coil Springs capable of full coil bind and 2" bump stop extensions to control the compression travel, but increase wheel travel. Brake line relocation brackets are supplied to handle the added wheel travel. Many companies don't include anything to correct your alignment, but BDS includes octo cam washers for the front lower control arms to fine tune the caster angle. Fixed swaybar links are included for Rubicon models with the factory disconnect system, for non-Rubicon models choose between BDS Ultimate Sway Bar Disconnects or JKS Quicker Disconnects. In the rear, sway bar drop brackets are included instead of longer sway bar links to allow the use of a factory wheel and larger tire. To correct the rear axle shift from the lift, a rear frame mounted track bar relocation bracket is included. The kit comes standard with NX2 series custom valved shock absorbers for a smooth ride. BDS carries a large selection of accessories for Jeep JK's so check out what is available for this 3" lift by customizing your system. Note: Components displayed in images may change based upon selections. Important Kit Notes 1. Exhaust modification may be required. 2. This kit is FMVSS No.126 Compliant. 3. This kit is right hand drive compatible. Follow right hand drive installation instructions when installing this kit on a right hand drive vehicle. The NHTSA's Federal Motor Vehicle Safety Standard (FMVSS) No.126 requires all new passenger vehicles to include Electronic Stability Control (ESC) systems that meet certain standards that can be tested through a comprehensive series of evasive maneuvers. Aftermarket products must meet these standards as well. BDS Suspension is leading the industry by independently testing all suspension kits to verify our kits are fully compliant with the stability control system requirements set by Federal Motor Vehicle Safety Standard (FMVSS) No. 126. Specifications Lift HeightFront (Base Kit):3 in Coil SpringsRear (Base Kit):3 in Coil SpringsTire and Wheel Combinations35" x 12.50" with 16 x 8 and 4-1/2" backspacing*Trimming may be required* Vehicle Fitment Data Make Model Type Lift Location Year Range Jeep Wrangler JK 2 Door 3" Front & Rear 2007-2011 Jeep Wrangler RHD JK 2 Door 3" Front & Rear 2007-2011 Installation Difficulty Level (1 easy â 5 complicated): 2Estimated Installation Time (hours): 6 InstructionsPDF (click here) Base Kit Components Qty Part# Description (1) 014310 Jk 3 In Box Kit (1) 034209 JK Rear 2 In Coil Kit (1) 034312 Jk 2 Door 3 In Front Coils (2) 85700 BDS NX2 Shock Absorber (2) 85951 NX2 Shock Absorber *Subject to change based upon selections

BDS Suspension 3" Lift Kit (2007-2011 Jeep Wrangler JK & RHD 2 Door 4WD - Standard Jeep or Rubicon) (1423H)

Code: 1423H
$743.25
In Stock
  • FREE SHIPPING

  • 30 DAY RETURNS

  • LIVE SUPPORT

Specifically intended for 2007-11 models, this system includes an exhaust extension kit that maximizes allowable wheel travel with the factory front driveshaft. This kit comes with 3" Pro-Ride Coil Springs capable of full coil bind and 2" bump stop extensions to control the compression travel, but increase wheel travel. Brake line relocation brackets are supplied to handle the added wheel travel. Many companies don't include anything to correct your alignment, but BDS includes octo cam washers for the front lower control arms to fine tune the caster angle.
Fixed swaybar links are included for Rubicon models with the factory disconnect system, for non-Rubicon models choose between BDS Ultimate Sway Bar Disconnects or JKS Quicker Disconnects. In the rear, sway bar drop brackets are included instead of longer sway bar links to allow the use of a factory wheel and larger tire. To correct the rear axle shift from the lift, a rear frame mounted track bar relocation bracket is included. The kit comes standard with NX2 series custom valved shock absorbers for a smooth ride.
BDS carries a large selection of accessories for Jeep JK's so check out what is available for this 3" lift by customizing your system.

Note: Components displayed in images may change based upon selections.

Important Kit Notes

1. Exhaust modification may be required.
2. This kit is FMVSS No.126 Compliant.
3. This kit is right hand drive compatible. Follow right hand drive installation instructions when installing this kit on a right hand drive vehicle.

The NHTSA's Federal Motor Vehicle Safety Standard (FMVSS) No.126 requires all new passenger vehicles to include Electronic Stability Control (ESC) systems that meet certain standards that can be tested through a comprehensive series of evasive maneuvers. Aftermarket products must meet these standards as well. BDS Suspension is leading the industry by independently testing all suspension kits to verify our kits are fully compliant with the stability control system requirements set by Federal Motor Vehicle Safety Standard (FMVSS) No. 126.

Specifications

Lift Height
Front (Base Kit):3 in Coil Springs
Rear (Base Kit):3 in Coil Springs

Tire and Wheel Combinations
35" x 12.50" with 16 x 8 and 4-1/2" backspacing
*Trimming may be required*

Vehicle Fitment Data

Make Model Type Lift Location Year Range
Jeep Wrangler JK 2 Door 3" Front & Rear 2007-2011
Jeep Wrangler RHD JK 2 Door 3" Front & Rear 2007-2011


Installation

Difficulty Level (1 easy â 5 complicated): 2
Estimated Installation Time (hours): 6

Instructions
PDF (click here)

Base Kit Components

Qty Part# Description
(1) 014310 Jk 3 In Box Kit
(1) 034209 JK Rear 2 In Coil Kit
(1) 034312 Jk 2 Door 3 In Front Coils
(2) 85700 BDS NX2 Shock Absorber
(2) 85951 NX2 Shock Absorber

*Subject to change based upon selections

Specifically intended for 2007-11 models, this system includes an exhaust extension kit that maximizes allowable wheel travel with the factory front driveshaft. This kit comes with 3" Pro-Ride Coil Springs capable of full coil bind and 2" bump stop extensions to control the compression travel, but increase wheel travel. Brake line relocation brackets are supplied to handle the added wheel travel. Many companies don't include anything to correct your alignment, but BDS includes octo cam washers for the front lower control arms to fine tune the caster angle.
Fixed swaybar links are included for Rubicon models with the factory disconnect system, for non-Rubicon models choose between BDS Ultimate Sway Bar Disconnects or JKS Quicker Disconnects. In the rear, sway bar drop brackets are included instead of longer sway bar links to allow the use of a factory wheel and larger tire. To correct the rear axle shift from the lift, a rear frame mounted track bar relocation bracket is included. The kit comes standard with NX2 series custom valved shock absorbers for a smooth ride.
BDS carries a large selection of accessories for Jeep JK's so check out what is available for this 3" lift by customizing your system.

Note: Components displayed in images may change based upon selections.

Important Kit Notes

1. Exhaust modification may be required.
2. This kit is FMVSS No.126 Compliant.
3. This kit is right hand drive compatible. Follow right hand drive installation instructions when installing this kit on a right hand drive vehicle.

The NHTSA's Federal Motor Vehicle Safety Standard (FMVSS) No.126 requires all new passenger vehicles to include Electronic Stability Control (ESC) systems that meet certain standards that can be tested through a comprehensive series of evasive maneuvers. Aftermarket products must meet these standards as well. BDS Suspension is leading the industry by independently testing all suspension kits to verify our kits are fully compliant with the stability control system requirements set by Federal Motor Vehicle Safety Standard (FMVSS) No. 126.

Specifications

Lift Height
Front (Base Kit):3 in Coil Springs
Rear (Base Kit):3 in Coil Springs

Tire and Wheel Combinations
35" x 12.50" with 16 x 8 and 4-1/2" backspacing
*Trimming may be required*

Vehicle Fitment Data

Make Model Type Lift Location Year Range
Jeep Wrangler JK 2 Door 3" Front & Rear 2007-2011
Jeep Wrangler RHD JK 2 Door 3" Front & Rear 2007-2011


Installation

Difficulty Level (1 easy â 5 complicated): 2
Estimated Installation Time (hours): 6

Instructions
PDF (click here)

Base Kit Components

Qty Part# Description
(1) 014310 Jk 3 In Box Kit
(1) 034209 JK Rear 2 In Coil Kit
(1) 034312 Jk 2 Door 3 In Front Coils
(2) 85700 BDS NX2 Shock Absorber
(2) 85951 NX2 Shock Absorber

*Subject to change based upon selections

IMPORTANT COVID-19 NOTE: 
Our warehouses are open and continuing to ship orders. However, please note that nearly all automotive parts manufacturers, distribution centers, and logistics centers face backorders and delays in order fulfillment.
 
If an item is unexpectedly out of stock or delayed,  Trident Trucks will make an effort to notify the customer, provide order status updates, and expedite the fulfillment process. If you have any questions pertaining to your order status, please use the Contact link above. We thank you for your patience and understanding.
 
Product Availability

To check stock levels, use our Live-Chat feature or Contact page. See the Lead Times tab for average order fulfillment times by manufacturer.

Note that some items ship directly from the manufacturer. For these items, the manufacturer may not provide real-time inventory data to Trident Trucks and backorders are possible. If an item is unavailable, Trident Trucks will contact the buyer with an estimated ship date. In the event of excessive manufacturer backorders or delays, Trident Trucks may opt to cancel the order and provide a full refund.

Shipping

Trident Trucks provides shipping within the contiguous 48 states only. For orders outside of this area, please use the Contact page prior to placing your order. Items shipped by ground or LTL generally arrive within 1-5 days from date of shipment. Trident Trucks is not responsible for carrier shipping delays.

Returns & Refunds

Items in their original condition may be returned within 30 days from the date of purchase for a full refund. Items may NOT be returned once packaging has been opened or the item has been installed, otherwise used, or damaged. The buyer is responsible for all return shipping charges. Returns and refunds may be requested through the Contact page.

Note: Do NOT ship items back until you have received a return authorization, as items may be returned to a facility other than their point of origin. Refunds will generally be processed within 48 business hours of receipt at our warehouse in order to allow for inspection and processing.

Product Data
Trident Trucks provides product data (including but not limited to item descriptions, important notes, and fitment information) as a courtesy only. This information is provided by product manufacturers and is assumed to be accurate at the time of publishing. Though Trident Trucks may periodically audit and update some product information based upon manufacturer's published data revisions, Trident Trucks does not guarantee the accuracy of any product data. Trident Trucks reserves the right to update product data as necessary and without notice, and will not be held responsible for misprints, or changes/variations made by vehicle manufacturers. Customers should consult the product manufacturer's website for the most up-to-date product data.
 
Markdown & Open Box Items
Markdown and Open Box items are offered at a discount as they have either been overstocked, slightly damaged, and/or returned from a previous customer. Items are sold "as-is." Trident Trucks will indicate any damage found during the inspection process. Please note that this does not guarantee that all defects have been identified. Sales for all items in this category are final. No refunds, exchanges, or replacements are permitted. Some manufacturers may continue to warranty such items; however, the purchaser accepts that some manufacturers may not extend warranties to items in this category. Please refer to the individual product manufacturer's warranty page for details.

F.A.Q.
How do I request a return?
Use the Contact page, ensuring to include your order number, contact information, items for return, and reason for return. One of our team members will contact you with return shipping details and instructions. Additional information and documentation may be required.
Note: Some items must be returned directly to the manufacturer. Please do not ship items to Trident Trucks prior to return authorization and return instructions.

How do I request a replacement for a missing or damaged part?
Upon receipt, please inspect all orders for completion, accuracy, and damage. If packaging appears to be damaged, ensure to photograph the damage, as this may be required for a shipping carrier claim.
Use the Contact page, ensuring to include your order number, contact information, and description of the incorrect or damaged part(s). One of our team members will contact you to correct the issue.

What product warranties doesTrident Trucks offer?
Product warranties are solely offered by product manufacturers. Please refer to the product manufacturer's warranty statement. In the event of a warranty claim,Trident Trucks is available to assist with the manufacturer's required documentation. Please use the Contact page if assistance is required.
Estimated order processing times for in-stock items.
To check stock levels, use our Live-Chat feature or Contact page.
 
 Manufacturer Estimated Lead Time
BDS Suspension
1-2 Days
Morimoto 1-2 Days
ReadyLIFT Suspensions 1-7 Days
Rough Country 1-2 Days
Zone Offroad 1-2 Days