BDS 6" 4-Link Lift Kit (2020-2022 Ford F250/F350 Super Duty 4WD Diesel) (1571H) BDS 6" 4-Link Lift Kit (2020-2022 Ford F250/F350 Super Duty 4WD Diesel) (1571H) BDS Suspension DIESEL ONLY. Take your 2020-2021 F350 Dually to the next level with the tried and true BDS 4-link conversion system. These 6" systems upgrade the factory stamped steel radius arms to a high strength 4-link offering improved handling, stability, strength and caster control during wheel travel. The 4-link brackets are built from 1/4" steel and key off the factory frame bracket and transmission crossmember for extra strength. Full length 6" ProRide diesel specific coil springs are used in the standard 4-link for the additional ride height paired with your choice of BDS NX2 series gas shocks or FOX 2.0 IFP performance gas shocks for a smooth ride on any terrain. For improved performance BDS offers FOX 2.5 factory series remote reservoir coilovers along with an auxiliary FOX 2.0 performance series IFP shock. A forged drop pitman arm and heavy duty track bar relocation bracket are supplied to correct steering angles and recenter the front axle. Also supplied for the front are bump stop extensions to limit suspension compression, sway bar drop brackets to correct the sway bar positioning, and brake line relocation brackets. In the rear of these new 6" systems BDS offers a replacement lift block to maintain the trucks factory overload leaf springs. Additionally high strength black e-coated u-bolts are supplied along with a pair of matching NX2 or FOX 2.0 gas shocks to compliment the front setup for all around impressive performance. Take your Super Duty to the next level with BDS Suspension. Important Kit Notes 1. Ford recommends replacement of the pitman arm nut after each time it has been removed2. Use a small pitman arm puller to remove the drag link joint and steering stabilizer taper3. If your truck is equipped with a factory rear sway bar add: BDS1238084. If your truck is equipped with a 2-piece rear driveshaft, a Carrier Bearing Drop Kit may be required: BDS1234025. Due to taller factory ride height, Tremor models will NOT net full advertised lift height6. Larger tires on stock wheel are not recommended due to brake line clearance required. Use recommended specs listed in wheel and tire fitment section7. This indexing ring is only compatiblie with 2020 10 speed transmission trucks. Please verify your truck's equipment before installing8. Indexing Ring has NOT been designed to work on manual shift transfer case models. Modification to the shift cable mount will be required Specifications Lift HeightFront (base kit): 6" 4-LinkRear (base kit): 5" Block Tire and Wheel Combinations 38x13.50 w/20x9 and 4.5" - 5" back spacing38x13.50 w/17x10 and 5" back spacing38x13.50 w/20x10 and 5" back spacing*Trimming may be required* Installation Est. Installation: 6-8 hoursDifficulty Level (easy 1 - 5 complicated): 4 InstructionsClick Here for PDF 1 of 3Click Here for PDF 2 of 3Click Here for PDF 3 of 3 Vehicle Fitment Data Make Model Year Range Ford F350 Super Duty DRW 4WD 2020-2022 Base Kit Components These components are subject to change based upon your selections. Qty Part# Description (1) 013526 17-20 F350 Dually 5" Block Kit (1) 013601 2017-2022 Super Duty 4-Link Box Kit 1of2 (1) 013604 2017-20 Super Duty 6In 4-Link Box Kit 2o (1) 033611 05-up Superduty 6 In Diesel Coils (1) 123605 2017-2022 SD T-Case Indexing Kit- DSL (1) 85431 NX2 Single Stabilizer (BDS Only) (2) 85718 BDS NX2 Shock (2) 85750 NX² Shock Absorber

BDS 6" 4-Link Lift Kit (2020-2022 Ford F250/F350 Super Duty 4WD Diesel) (1571H)

Code: 1571H
$2,638.40
In Stock
  • FREE SHIPPING

  • 30 DAY RETURNS

  • LIVE SUPPORT

DIESEL ONLY.

Take your 2020-2021 F350 Dually to the next level with the tried and true BDS 4-link conversion system.

These 6" systems upgrade the factory stamped steel radius arms to a high strength 4-link offering improved handling, stability, strength and caster control during wheel travel. The 4-link brackets are built from 1/4" steel and key off the factory frame bracket and transmission crossmember for extra strength. Full length 6" ProRide diesel specific coil springs are used in the standard 4-link for the additional ride height paired with your choice of BDS NX2 series gas shocks or FOX 2.0 IFP performance gas shocks for a smooth ride on any terrain. For improved performance BDS offers FOX 2.5 factory series remote reservoir coilovers along with an auxiliary FOX 2.0 performance series IFP shock. A forged drop pitman arm and heavy duty track bar relocation bracket are supplied to correct steering angles and recenter the front axle. Also supplied for the front are bump stop extensions to limit suspension compression, sway bar drop brackets to correct the sway bar positioning, and brake line relocation brackets.

In the rear of these new 6" systems BDS offers a replacement lift block to maintain the trucks factory overload leaf springs. Additionally high strength black e-coated u-bolts are supplied along with a pair of matching NX2 or FOX 2.0 gas shocks to compliment the front setup for all around impressive performance. Take your Super Duty to the next level with BDS Suspension.


Important Kit Notes

1. Ford recommends replacement of the pitman arm nut after each time it has been removed
2. Use a small pitman arm puller to remove the drag link joint and steering stabilizer taper
3. If your truck is equipped with a factory rear sway bar add: BDS123808
4. If your truck is equipped with a 2-piece rear driveshaft, a Carrier Bearing Drop Kit may be required: BDS123402
5. Due to taller factory ride height, Tremor models will NOT net full advertised lift height
6. Larger tires on stock wheel are not recommended due to brake line clearance required. Use recommended specs listed in wheel and tire fitment section
7. This indexing ring is only compatiblie with 2020 10 speed transmission trucks. Please verify your truck's equipment before installing
8. Indexing Ring has NOT been designed to work on manual shift transfer case models. Modification to the shift cable mount will be required

Specifications

Lift Height
Front (base kit): 6" 4-Link
Rear (base kit): 5" Block

Tire and Wheel Combinations
38x13.50 w/20x9 and 4.5" - 5" back spacing
38x13.50 w/17x10 and 5" back spacing
38x13.50 w/20x10 and 5" back spacing
*Trimming may be required*

Installation

Est. Installation: 6-8 hours
Difficulty Level (easy 1 - 5 complicated): 4

Instructions
Click Here for PDF 1 of 3
Click Here for PDF 2 of 3
Click Here for PDF 3 of 3

Vehicle Fitment Data

Make Model Year Range
Ford F350 Super Duty DRW 4WD 2020-2022

Base Kit Components

These components are subject to change based upon your selections.

Qty Part# Description
(1) 013526 17-20 F350 Dually 5" Block Kit
(1) 013601 2017-2022 Super Duty 4-Link Box Kit 1of2
(1) 013604 2017-20 Super Duty 6In 4-Link Box Kit 2o
(1) 033611 05-up Superduty 6 In Diesel Coils
(1) 123605 2017-2022 SD T-Case Indexing Kit- DSL
(1) 85431 NX2 Single Stabilizer (BDS Only)
(2) 85718 BDS NX2 Shock
(2) 85750 NX² Shock Absorber

DIESEL ONLY.

Take your 2020-2021 F350 Dually to the next level with the tried and true BDS 4-link conversion system.

These 6" systems upgrade the factory stamped steel radius arms to a high strength 4-link offering improved handling, stability, strength and caster control during wheel travel. The 4-link brackets are built from 1/4" steel and key off the factory frame bracket and transmission crossmember for extra strength. Full length 6" ProRide diesel specific coil springs are used in the standard 4-link for the additional ride height paired with your choice of BDS NX2 series gas shocks or FOX 2.0 IFP performance gas shocks for a smooth ride on any terrain. For improved performance BDS offers FOX 2.5 factory series remote reservoir coilovers along with an auxiliary FOX 2.0 performance series IFP shock. A forged drop pitman arm and heavy duty track bar relocation bracket are supplied to correct steering angles and recenter the front axle. Also supplied for the front are bump stop extensions to limit suspension compression, sway bar drop brackets to correct the sway bar positioning, and brake line relocation brackets.

In the rear of these new 6" systems BDS offers a replacement lift block to maintain the trucks factory overload leaf springs. Additionally high strength black e-coated u-bolts are supplied along with a pair of matching NX2 or FOX 2.0 gas shocks to compliment the front setup for all around impressive performance. Take your Super Duty to the next level with BDS Suspension.


Important Kit Notes

1. Ford recommends replacement of the pitman arm nut after each time it has been removed
2. Use a small pitman arm puller to remove the drag link joint and steering stabilizer taper
3. If your truck is equipped with a factory rear sway bar add: BDS123808
4. If your truck is equipped with a 2-piece rear driveshaft, a Carrier Bearing Drop Kit may be required: BDS123402
5. Due to taller factory ride height, Tremor models will NOT net full advertised lift height
6. Larger tires on stock wheel are not recommended due to brake line clearance required. Use recommended specs listed in wheel and tire fitment section
7. This indexing ring is only compatiblie with 2020 10 speed transmission trucks. Please verify your truck's equipment before installing
8. Indexing Ring has NOT been designed to work on manual shift transfer case models. Modification to the shift cable mount will be required

Specifications

Lift Height
Front (base kit): 6" 4-Link
Rear (base kit): 5" Block

Tire and Wheel Combinations
38x13.50 w/20x9 and 4.5" - 5" back spacing
38x13.50 w/17x10 and 5" back spacing
38x13.50 w/20x10 and 5" back spacing
*Trimming may be required*

Installation

Est. Installation: 6-8 hours
Difficulty Level (easy 1 - 5 complicated): 4

Instructions
Click Here for PDF 1 of 3
Click Here for PDF 2 of 3
Click Here for PDF 3 of 3

Vehicle Fitment Data

Make Model Year Range
Ford F350 Super Duty DRW 4WD 2020-2022

Base Kit Components

These components are subject to change based upon your selections.

Qty Part# Description
(1) 013526 17-20 F350 Dually 5" Block Kit
(1) 013601 2017-2022 Super Duty 4-Link Box Kit 1of2
(1) 013604 2017-20 Super Duty 6In 4-Link Box Kit 2o
(1) 033611 05-up Superduty 6 In Diesel Coils
(1) 123605 2017-2022 SD T-Case Indexing Kit- DSL
(1) 85431 NX2 Single Stabilizer (BDS Only)
(2) 85718 BDS NX2 Shock
(2) 85750 NX² Shock Absorber

IMPORTANT COVID-19 NOTE: 
Our warehouses are open and continuing to ship orders. However, please note that nearly all automotive parts manufacturers, distribution centers, and logistics centers face backorders and delays in order fulfillment.
 
If an item is unexpectedly out of stock or delayed,  Trident Trucks will make an effort to notify the customer, provide order status updates, and expedite the fulfillment process. If you have any questions pertaining to your order status, please use the Contact link above. We thank you for your patience and understanding.
 
Product Availability

To check stock levels, use our Live-Chat feature or Contact page. See the Lead Times tab for average order fulfillment times by manufacturer.

Note that some items ship directly from the manufacturer. For these items, the manufacturer may not provide real-time inventory data to Trident Trucks and backorders are possible. If an item is unavailable, Trident Trucks will contact the buyer with an estimated ship date. In the event of excessive manufacturer backorders or delays, Trident Trucks may opt to cancel the order and provide a full refund.

Shipping

Trident Trucks provides shipping within the contiguous 48 states only. For orders outside of this area, please use the Contact page prior to placing your order. Items shipped by ground or LTL generally arrive within 1-5 days from date of shipment. Trident Trucks is not responsible for carrier shipping delays.

Returns & Refunds

Items in their original condition may be returned within 30 days from the date of purchase for a full refund. Items may NOT be returned once packaging has been opened or the item has been installed, otherwise used, or damaged. The buyer is responsible for all return shipping charges. Returns and refunds may be requested through the Contact page.

Note: Do NOT ship items back until you have received a return authorization, as items may be returned to a facility other than their point of origin. Refunds will generally be processed within 48 business hours of receipt at our warehouse in order to allow for inspection and processing.

Product Data
Trident Trucks provides product data (including but not limited to item descriptions, important notes, and fitment information) as a courtesy only. This information is provided by product manufacturers and is assumed to be accurate at the time of publishing. Though Trident Trucks may periodically audit and update some product information based upon manufacturer's published data revisions, Trident Trucks does not guarantee the accuracy of any product data. Trident Trucks reserves the right to update product data as necessary and without notice, and will not be held responsible for misprints, or changes/variations made by vehicle manufacturers. Customers should consult the product manufacturer's website for the most up-to-date product data.
 
Markdown & Open Box Items
Markdown and Open Box items are offered at a discount as they have either been overstocked, slightly damaged, and/or returned from a previous customer. Items are sold "as-is." Trident Trucks will indicate any damage found during the inspection process. Please note that this does not guarantee that all defects have been identified. Sales for all items in this category are final. No refunds, exchanges, or replacements are permitted. Some manufacturers may continue to warranty such items; however, the purchaser accepts that some manufacturers may not extend warranties to items in this category. Please refer to the individual product manufacturer's warranty page for details.

F.A.Q.
How do I request a return?
Use the Contact page, ensuring to include your order number, contact information, items for return, and reason for return. One of our team members will contact you with return shipping details and instructions. Additional information and documentation may be required.
Note: Some items must be returned directly to the manufacturer. Please do not ship items to Trident Trucks prior to return authorization and return instructions.

How do I request a replacement for a missing or damaged part?
Upon receipt, please inspect all orders for completion, accuracy, and damage. If packaging appears to be damaged, ensure to photograph the damage, as this may be required for a shipping carrier claim.
Use the Contact page, ensuring to include your order number, contact information, and description of the incorrect or damaged part(s). One of our team members will contact you to correct the issue.

What product warranties doesTrident Trucks offer?
Product warranties are solely offered by product manufacturers. Please refer to the product manufacturer's warranty statement. In the event of a warranty claim,Trident Trucks is available to assist with the manufacturer's required documentation. Please use the Contact page if assistance is required.
Estimated order processing times for in-stock items.
To check stock levels, use our Live-Chat feature or Contact page.
 
 Manufacturer Estimated Lead Time
BDS Suspension
1-2 Days
Morimoto 1-2 Days
ReadyLIFT Suspensions 1-7 Days
Rough Country 1-2 Days
Zone Offroad 1-2 Days