BDS 4" Lift Kit (2019-2022 Dodge/RAM 1500 Truck & Rebel 4WD w/o Air-Ride) (1663H) BDS 4" Lift Kit (2019-2022 Dodge/RAM 1500 Truck & Rebel 4WD w/o Air-Ride) (1663H) BDS Suspension 2020 Dodge RAM 1500 w/o Air Ride Improve the look and performance of your RAM 1500 4WD truck with the BDS Suspension 4" IFS lift system. Based around the tried and true high clearance technology that has made BDS the go to for RAM suspension lifts, these systems have been designed from the ground up to get more out of your late model RAMs. At the heart of this 4" system BDS utilizes a pair of 1/4" thick laser cut high clearance crossmembers to maximize clearance and provide a solid mounting point for the OE lower control arms. These paired with the heavy duty front skid plate system create a rigid subframe while adding protection for vital steering and driveline components. In place of the factory steering knuckles a pair of specially designed ductile iron replacement steering knuckles are supplied to maintain proper steering geometry for ESC system compatibility. These connect to the factory steering with a pair of heavy duty replacement tie rod ends included in the kit. The front differential is repositioned with BDS's multipoint relocation bracket system to secure the front differential and keep CV axle angles at a minimum. A billet aluminum front driveshaft spacer is also supplied along with longer hardware to allow the reinstallation of the factory driveshaft. Additional ride height on this particular kit comes from a set of top mounted steel fabricated strut spacers along with a preload spacers to maintain ride quality and handling characteristics. Rounding out the front of this kit are a pair of stainless steel braided extended brake line and sway bar relocation brackets. In the rear of this 4" lift system the factory coil springs are replaced with 3" ProRide dual rate coil springs to lift and level the stance. With the additional ride height the rear suspension geometry is corrected with control arm relocation brackets, a bolt-on rear track bar relocation bracket to recenter the axle, extended length sway bar links to correct operating angle, and bump stop extensions to properly limit up travel. The rear of these kits are rounded out with your choice of specially tuned NX2 nitro series gas shocks or FOX 2.0 IFP performance series gas shocks to offer improved damper performance. All kits come finished in a durable textured black powdercoat and sent with all hardware packs to complete the install along with step-by-step installation instructions. Important Kit Notes 1. Fits 4WD models only2. RAMs with factory 22" wheels require the larger bore knuckles due to larger wheel bearing assembly. Reference build code WPM or WPZ.3. Will NOT fit adjustable "air ride" suspension equipped models.4. Stock 18" wheels cannot be reinstalled due to steering interference. Stock 20s can be reinstalled with factory tire size5. Will NOT work on diesel models6. Will NOT fit RAM 1500 Classic models, Refer to the 2018 kit listings.7. Will NOT fit models equipped with the Thermal Axle option. Reference build code DSK-P or check diff cover for cooling lines mounted as circled in reference image (click here for reference image). Specifications Lift HeightFront (base kit): 4" Coil SpacerRear (base kit): 3" Coil Spring Tire and Wheel Combinations *35x12.50 w/18x9 and 5" back spacing*Trimming may be required* Installation Est. Installation: 10 hoursDifficulty Level (easy 1 - 5 complicated): 4 InstructionsClick Here for PDF 1 of 2Click Here for PDF 2 of 2 Vehicle Fitment Data Make Model Type Year Range Dodge / Ram 1500 Rebel 4WD w/o Air-Ride 2019-2022 Dodge / Ram 1500 Truck 4WD w/o Air-Ride 2019-2022 Base Kit Components These components are subject to change based upon your selections. Qty Part# Description (1) 022404 2019 Ram 1500 4in Strut Spacer Box Kit (1) 022508 2019 Ram 1500 Rear Box Kit (1) 022632 2019-20 Ram 1500 Knuckle Box Kit - DRV (1) 022633 2019-20 Ram 1500 Knuckle Box Kit - PASS (1) 022642 2020 Ram Front Box Kit 1 of 2 (1) 022643 2020 Ram Front Box Kit 2 of 2 (1) 032308 2019 Ram 1500 3in Rear Coil Box Kit (2) 85750 NX² Shock Absorber

BDS 4" Lift Kit (2019-2022 Dodge/RAM 1500 Truck & Rebel 4WD w/o Air-Ride) (1663H)

Code: 1663H
$2,417.35
In Stock
Add to Wishlist Add to Compare
  • SEE DISCOUNT AT CHECKOUT PAGE

  • FREE SHIPPING ON ALL ORDERS

  • 30 DAY RETURNS (SEE ORDER POLICES)

2020 Dodge RAM 1500 w/o Air Ride

Improve the look and performance of your RAM 1500 4WD truck with the BDS Suspension 4" IFS lift system. Based around the tried and true high clearance technology that has made BDS the go to for RAM suspension lifts, these systems have been designed from the ground up to get more out of your late model RAMs. At the heart of this 4" system BDS utilizes a pair of 1/4" thick laser cut high clearance crossmembers to maximize clearance and provide a solid mounting point for the OE lower control arms. These paired with the heavy duty front skid plate system create a rigid subframe while adding protection for vital steering and driveline components. In place of the factory steering knuckles a pair of specially designed ductile iron replacement steering knuckles are supplied to maintain proper steering geometry for ESC system compatibility. These connect to the factory steering with a pair of heavy duty replacement tie rod ends included in the kit. The front differential is repositioned with BDS's multipoint relocation bracket system to secure the front differential and keep CV axle angles at a minimum. A billet aluminum front driveshaft spacer is also supplied along with longer hardware to allow the reinstallation of the factory driveshaft. Additional ride height on this particular kit comes from a set of top mounted steel fabricated strut spacers along with a preload spacers to maintain ride quality and handling characteristics. Rounding out the front of this kit are a pair of stainless steel braided extended brake line and sway bar relocation brackets.

In the rear of this 4" lift system the factory coil springs are replaced with 3" ProRide dual rate coil springs to lift and level the stance. With the additional ride height the rear suspension geometry is corrected with control arm relocation brackets, a bolt-on rear track bar relocation bracket to recenter the axle, extended length sway bar links to correct operating angle, and bump stop extensions to properly limit up travel. The rear of these kits are rounded out with your choice of specially tuned NX2 nitro series gas shocks or FOX 2.0 IFP performance series gas shocks to offer improved damper performance. All kits come finished in a durable textured black powdercoat and sent with all hardware packs to complete the install along with step-by-step installation instructions.


Important Kit Notes

1. Fits 4WD models only
2. RAMs with factory 22" wheels require the larger bore knuckles due to larger wheel bearing assembly. Reference build code WPM or WPZ.
3. Will NOT fit adjustable "air ride" suspension equipped models.
4. Stock 18" wheels cannot be reinstalled due to steering interference. Stock 20s can be reinstalled with factory tire size
5. Will NOT work on diesel models
6. Will NOT fit RAM 1500 Classic models, Refer to the 2018 kit listings.
7. Will NOT fit models equipped with the Thermal Axle option. Reference build code DSK-P or check diff cover for cooling lines mounted as circled in reference image (click here for reference image).

Specifications

Lift Height
Front (base kit): 4" Coil Spacer
Rear (base kit): 3" Coil Spring

Tire and Wheel Combinations
*35x12.50 w/18x9 and 5" back spacing
*Trimming may be required*

Installation

Est. Installation: 10 hours
Difficulty Level (easy 1 - 5 complicated): 4

Instructions
Click Here for PDF 1 of 2
Click Here for PDF 2 of 2

Vehicle Fitment Data

Make Model Type Year Range
Dodge / Ram 1500 Rebel 4WD w/o Air-Ride 2019-2022
Dodge / Ram 1500 Truck 4WD w/o Air-Ride 2019-2022

Base Kit Components

These components are subject to change based upon your selections.

Qty Part# Description
(1) 022404 2019 Ram 1500 4in Strut Spacer Box Kit
(1) 022508 2019 Ram 1500 Rear Box Kit
(1) 022632 2019-20 Ram 1500 Knuckle Box Kit - DRV
(1) 022633 2019-20 Ram 1500 Knuckle Box Kit - PASS
(1) 022642 2020 Ram Front Box Kit 1 of 2
(1) 022643 2020 Ram Front Box Kit 2 of 2
(1) 032308 2019 Ram 1500 3in Rear Coil Box Kit
(2) 85750 NX² Shock Absorber

2020 Dodge RAM 1500 w/o Air Ride

Improve the look and performance of your RAM 1500 4WD truck with the BDS Suspension 4" IFS lift system. Based around the tried and true high clearance technology that has made BDS the go to for RAM suspension lifts, these systems have been designed from the ground up to get more out of your late model RAMs. At the heart of this 4" system BDS utilizes a pair of 1/4" thick laser cut high clearance crossmembers to maximize clearance and provide a solid mounting point for the OE lower control arms. These paired with the heavy duty front skid plate system create a rigid subframe while adding protection for vital steering and driveline components. In place of the factory steering knuckles a pair of specially designed ductile iron replacement steering knuckles are supplied to maintain proper steering geometry for ESC system compatibility. These connect to the factory steering with a pair of heavy duty replacement tie rod ends included in the kit. The front differential is repositioned with BDS's multipoint relocation bracket system to secure the front differential and keep CV axle angles at a minimum. A billet aluminum front driveshaft spacer is also supplied along with longer hardware to allow the reinstallation of the factory driveshaft. Additional ride height on this particular kit comes from a set of top mounted steel fabricated strut spacers along with a preload spacers to maintain ride quality and handling characteristics. Rounding out the front of this kit are a pair of stainless steel braided extended brake line and sway bar relocation brackets.

In the rear of this 4" lift system the factory coil springs are replaced with 3" ProRide dual rate coil springs to lift and level the stance. With the additional ride height the rear suspension geometry is corrected with control arm relocation brackets, a bolt-on rear track bar relocation bracket to recenter the axle, extended length sway bar links to correct operating angle, and bump stop extensions to properly limit up travel. The rear of these kits are rounded out with your choice of specially tuned NX2 nitro series gas shocks or FOX 2.0 IFP performance series gas shocks to offer improved damper performance. All kits come finished in a durable textured black powdercoat and sent with all hardware packs to complete the install along with step-by-step installation instructions.


Important Kit Notes

1. Fits 4WD models only
2. RAMs with factory 22" wheels require the larger bore knuckles due to larger wheel bearing assembly. Reference build code WPM or WPZ.
3. Will NOT fit adjustable "air ride" suspension equipped models.
4. Stock 18" wheels cannot be reinstalled due to steering interference. Stock 20s can be reinstalled with factory tire size
5. Will NOT work on diesel models
6. Will NOT fit RAM 1500 Classic models, Refer to the 2018 kit listings.
7. Will NOT fit models equipped with the Thermal Axle option. Reference build code DSK-P or check diff cover for cooling lines mounted as circled in reference image (click here for reference image).

Specifications

Lift Height
Front (base kit): 4" Coil Spacer
Rear (base kit): 3" Coil Spring

Tire and Wheel Combinations
*35x12.50 w/18x9 and 5" back spacing
*Trimming may be required*

Installation

Est. Installation: 10 hours
Difficulty Level (easy 1 - 5 complicated): 4

Instructions
Click Here for PDF 1 of 2
Click Here for PDF 2 of 2

Vehicle Fitment Data

Make Model Type Year Range
Dodge / Ram 1500 Rebel 4WD w/o Air-Ride 2019-2022
Dodge / Ram 1500 Truck 4WD w/o Air-Ride 2019-2022

Base Kit Components

These components are subject to change based upon your selections.

Qty Part# Description
(1) 022404 2019 Ram 1500 4in Strut Spacer Box Kit
(1) 022508 2019 Ram 1500 Rear Box Kit
(1) 022632 2019-20 Ram 1500 Knuckle Box Kit - DRV
(1) 022633 2019-20 Ram 1500 Knuckle Box Kit - PASS
(1) 022642 2020 Ram Front Box Kit 1 of 2
(1) 022643 2020 Ram Front Box Kit 2 of 2
(1) 032308 2019 Ram 1500 3in Rear Coil Box Kit
(2) 85750 NX² Shock Absorber

IMPORTANT COVID-19 NOTE: 
Our warehouses are open and continuing to ship orders. However, please note that nearly all automotive parts manufacturers, distribution centers, and logistics centers face backorders and delays in order fulfillment.
 
If an item is unexpectedly out of stock or delayed,  Trident Trucks will make an effort to notify the customer, provide order status updates, and expedite the fulfillment process. If you have any questions pertaining to your order status, please use the Contact link above. We thank you for your patience and understanding.
 
Product Availability

See the Lead Times tab for average order fulfillment times by manufacturer. Note that some items ship directly from the manufacturer. For these items, the manufacturer may not provide real-time inventory data to Trident Trucks and backorders are possible. If an item is unavailable, Trident Trucks will contact the buyer with an estimated in-stock and shipping date. Trident Trucks may issue a full refund in the event of a backordered item.

Shipping

Trident Trucks provides shipping within the continental United States only. For orders outside of this area, please use the Contact page prior to placing your order. Items shipped by ground or LTL generally arrive within 1-5 days from date of shipment. Trident Trucks is not responsible for carrier shipping delays.

Returns & Refunds

Items in their original condition may be returned within 30 days from the date of purchase for a full refund. Items may NOT be returned once packaging has been opened or the item has been installed, otherwise used, or damaged. The buyer is responsible for all return shipping charges. Returns and refunds may be requested through the Contact page.

Note: Do NOT ship items back until you have received a return authorization, as items may be returned to a facility other than their point of origin. Refunds will generally be processed within 48 business hours of receipt at our warehouse in order to allow for inspection and processing.

Product Data
Trident Trucks provides product data (including but not limited to item descriptions, important notes, and fitment information) as a courtesy only. This information is provided by product manufacturers and is assumed to be accurate at the time of publishing. Though Trident Trucks may periodically audit and update some product information based upon manufacturer's published data revisions, Trident Trucks does not guarantee the accuracy of any product data. Trident Trucks reserves the right to update product data as necessary and without notice, and will not be held responsible for misprints, or changes/variations made by vehicle manufacturers. Customers should consult the product manufacturer's website for the most up-to-date product data.
 
Markdown & Open Box Items
Markdown and Open Box items are offered at a discount as they have either been overstocked, slightly damaged, and/or returned from a previous customer. Items are sold "as-is." Trident Trucks will indicate any damage found during the inspection process. Please note that this does not guarantee that all defects have been identified. Sales for all items in this category are final. No refunds, exchanges, or replacements are permitted. Some manufacturers may continue to warranty such items; however, the purchaser accepts that some manufacturers may not extend warranties to items in this category. Please refer to the individual product manufacturer's warranty page for details.

F.A.Q.
How do I request a return?
Use the Contact page, ensuring to include your order number, contact information, items for return, and reason for return. One of our team members will contact you with return shipping details and instructions. Additional information and documentation may be required.
Note: Some items must be returned directly to the manufacturer. Please do not ship items to Trident Trucks prior to return authorization and return instructions.

How do I request a replacement for a missing or damaged part?
Upon receipt, please inspect all orders for completion, accuracy, and damage. If packaging appears to be damaged, ensure to photograph the damage, as this may be required for a shipping carrier claim.
Use the Contact page, ensuring to include your order number, contact information, and description of the incorrect or damaged part(s). One of our team members will contact you to correct the issue.

What product warranties doesTrident Trucks offer?
Product warranties are solely offered by product manufacturers. Please refer to the product manufacturer's warranty statement. In the event of a warranty claim,Trident Trucks is available to assist with the manufacturer's required documentation. Please use the Contact page if assistance is required.
Estimated manufacturer order processing times for in-stock items.
 
 Manufacturer Estimated Lead Time
BDS Suspension 1 Week
Rough Country 1-2 Days
Zone Offroad 1-2 Days