BDS 3.5" Coilover DSC Lift Kit (2019-2020 Ford Ranger 4WD) (1545FDSC) BDS 3.5" Coilover DSC Lift Kit (2019-2020 Ford Ranger 4WD) (1545FDSC) BDS Suspension BDS Suspension raises the bar with new 3.5" DSC Coilover Lift Systems designed to take advantage of the stout factory front suspension design on the 2019-2020 Ford Ranger. At the heart of these 3.5" DSC coilover systems are a pair with the new aluminum-bodied FOX 2.5 performance elite series coilovers. These coilovers are preset for the correct lift height right out of the box and use a threaded body to allow preload adjustment. They are a direct bolt-in replacement for the factory strut assemblies and improve damper performance featuring a 2.5" extruded and machined 6061 T6 aluminum body for better heat dispersion, along with7/8" hardened steel carbon shaft, Eibach coil springs and black anodized machined 6061-T6 billet aluminum mounts along with remote reservoirs with mounting brackets. The DSC (dual speed compression) reservoir allows for easy tool-free adjustment of high-speed and low-speed compression adjustment settings to further dial in the damping to the terrain and ride preferences. Also supplied for the front end are a pair of performance upper control arms (UCAs) designed for improved strength and suspension travel. Built from thick wall 1.5" DOM tubing, these UCAs utilize an indexed ball joint cup to reposition the upper ball joints and allowing more droop travel. These arms come fully assembled right out of the box with high quality greaseable ball joints and rubber bushings for long life, quiet operation and superior corrosion resistance over uniballs and heims. Finishing out the front of these 3.5" systems are fully fabricated differential relocation brackets to correct CV axle operating angles. In the rear of these lift systems the factory leaf springs are retained and 1" lift comes from a heavy duty replacement shackle. These shackles are built from high strength 3/8" steel and have the benefit of leveling the stance, correcting rear pinion angle and allowing for increased rear suspension travel. Also supplied for the rear of these 3.5" lift kits are a pair. Also supplied for the rear of these 3.5" lift kits are your choice of FOX 2.0 performance series IFP shocks or upgraded FOX 2.5 factory series DSC adjustable shocks to match the front performance and adjustability. These kits come finished in a durable black powdercoat finish and sent with all hardware packs to complete the install along with step-by-step installation instructions. Important Kit Notes 1. Aftermarket wheels must have a minimum of 93.1mm center hub bore.2. Tires larger than 285/70r17 or 285/65r18 cannot be installed on factory wheels due to steering knuckle clearance.3. Will NOT work on trucks equipped with cast steel steering knuckles4. Will NOT work with Tremor models. Specifications Lift HeightFront (base kit): 3.5" CoiloverRear (base kit): 1" Shackle Tire and Wheel Combinations 275/65r w/20x9 and 6.18" back spacing285/66r w/18x9 and 5.5-5.75" back spacing305/55r w/20x9 and 5" back spacing*Trimming may be required* Installation Est. Installation: 4 hoursDifficulty Level (easy 1 - 5 complicated): 3 InstructionsPDF (click here) 1 of 2 PDF (click here) 2 of 2 Vehicle Fitment Data Make Model Lift Year Range Ford Ranger 4WD 3.5" 2019-2020 Base Kit Components These components are subject to change based upon your selections. Qty Part# Description (1) 013350 2019-2020 Ford Ranger Coilover 2.5"-3.5" (1) 123614 2019-2020 Ford Ranger Intrusion Beam Kit (1) 88306156 KIT: 19-ON Ford Ranger, US Only, Front, (2) 98224880 Fox 2.0 Shock 26.35 x 16.75 x 2- EB1/EB1

BDS 3.5" Coilover DSC Lift Kit (2019-2020 Ford Ranger 4WD) (1545FDSC)

Code: 1545FDSC
$4,013.65
In Stock
  • FREE SHIPPING

  • 30 DAY RETURNS

  • LIVE SUPPORT

BDS Suspension raises the bar with new 3.5" DSC Coilover Lift Systems designed to take advantage of the stout factory front suspension design on the 2019-2020 Ford Ranger.

At the heart of these 3.5" DSC coilover systems are a pair with the new aluminum-bodied FOX 2.5 performance elite series coilovers. These coilovers are preset for the correct lift height right out of the box and use a threaded body to allow preload adjustment. They are a direct bolt-in replacement for the factory strut assemblies and improve damper performance featuring a 2.5" extruded and machined 6061 T6 aluminum body for better heat dispersion, along with7/8" hardened steel carbon shaft, Eibach coil springs and black anodized machined 6061-T6 billet aluminum mounts along with remote reservoirs with mounting brackets. The DSC (dual speed compression) reservoir allows for easy tool-free adjustment of high-speed and low-speed compression adjustment settings to further dial in the damping to the terrain and ride preferences. Also supplied for the front end are a pair of performance upper control arms (UCAs) designed for improved strength and suspension travel. Built from thick wall 1.5" DOM tubing, these UCAs utilize an indexed ball joint cup to reposition the upper ball joints and allowing more droop travel. These arms come fully assembled right out of the box with high quality greaseable ball joints and rubber bushings for long life, quiet operation and superior corrosion resistance over uniballs and heims. Finishing out the front of these 3.5" systems are fully fabricated differential relocation brackets to correct CV axle operating angles.

In the rear of these lift systems the factory leaf springs are retained and 1" lift comes from a heavy duty replacement shackle. These shackles are built from high strength 3/8" steel and have the benefit of leveling the stance, correcting rear pinion angle and allowing for increased rear suspension travel. Also supplied for the rear of these 3.5" lift kits are a pair. Also supplied for the rear of these 3.5" lift kits are your choice of FOX 2.0 performance series IFP shocks or upgraded FOX 2.5 factory series DSC adjustable shocks to match the front performance and adjustability. These kits come finished in a durable black powdercoat finish and sent with all hardware packs to complete the install along with step-by-step installation instructions.

Important Kit Notes

1. Aftermarket wheels must have a minimum of 93.1mm center hub bore.
2. Tires larger than 285/70r17 or 285/65r18 cannot be installed on factory wheels due to steering knuckle clearance.
3. Will NOT work on trucks equipped with cast steel steering knuckles
4. Will NOT work with Tremor models.

Specifications

Lift Height
Front (base kit): 3.5" Coilover
Rear (base kit): 1" Shackle

Tire and Wheel Combinations
275/65r w/20x9 and 6.18" back spacing
285/66r w/18x9 and 5.5-5.75" back spacing
305/55r w/20x9 and 5" back spacing
*Trimming may be required*

Installation

Est. Installation: 4 hours
Difficulty Level (easy 1 - 5 complicated): 3

Instructions
PDF (click here) 1 of 2
PDF (click here) 2 of 2


Vehicle Fitment Data

Make Model Lift Year Range
Ford Ranger 4WD 3.5" 2019-2020

Base Kit Components

These components are subject to change based upon your selections.

Qty Part# Description
(1) 013350 2019-2020 Ford Ranger Coilover 2.5"-3.5"
(1) 123614 2019-2020 Ford Ranger Intrusion Beam Kit
(1) 88306156 KIT: 19-ON Ford Ranger, US Only, Front,
(2) 98224880 Fox 2.0 Shock 26.35 x 16.75 x 2- EB1/EB1

BDS Suspension raises the bar with new 3.5" DSC Coilover Lift Systems designed to take advantage of the stout factory front suspension design on the 2019-2020 Ford Ranger.

At the heart of these 3.5" DSC coilover systems are a pair with the new aluminum-bodied FOX 2.5 performance elite series coilovers. These coilovers are preset for the correct lift height right out of the box and use a threaded body to allow preload adjustment. They are a direct bolt-in replacement for the factory strut assemblies and improve damper performance featuring a 2.5" extruded and machined 6061 T6 aluminum body for better heat dispersion, along with7/8" hardened steel carbon shaft, Eibach coil springs and black anodized machined 6061-T6 billet aluminum mounts along with remote reservoirs with mounting brackets. The DSC (dual speed compression) reservoir allows for easy tool-free adjustment of high-speed and low-speed compression adjustment settings to further dial in the damping to the terrain and ride preferences. Also supplied for the front end are a pair of performance upper control arms (UCAs) designed for improved strength and suspension travel. Built from thick wall 1.5" DOM tubing, these UCAs utilize an indexed ball joint cup to reposition the upper ball joints and allowing more droop travel. These arms come fully assembled right out of the box with high quality greaseable ball joints and rubber bushings for long life, quiet operation and superior corrosion resistance over uniballs and heims. Finishing out the front of these 3.5" systems are fully fabricated differential relocation brackets to correct CV axle operating angles.

In the rear of these lift systems the factory leaf springs are retained and 1" lift comes from a heavy duty replacement shackle. These shackles are built from high strength 3/8" steel and have the benefit of leveling the stance, correcting rear pinion angle and allowing for increased rear suspension travel. Also supplied for the rear of these 3.5" lift kits are a pair. Also supplied for the rear of these 3.5" lift kits are your choice of FOX 2.0 performance series IFP shocks or upgraded FOX 2.5 factory series DSC adjustable shocks to match the front performance and adjustability. These kits come finished in a durable black powdercoat finish and sent with all hardware packs to complete the install along with step-by-step installation instructions.

Important Kit Notes

1. Aftermarket wheels must have a minimum of 93.1mm center hub bore.
2. Tires larger than 285/70r17 or 285/65r18 cannot be installed on factory wheels due to steering knuckle clearance.
3. Will NOT work on trucks equipped with cast steel steering knuckles
4. Will NOT work with Tremor models.

Specifications

Lift Height
Front (base kit): 3.5" Coilover
Rear (base kit): 1" Shackle

Tire and Wheel Combinations
275/65r w/20x9 and 6.18" back spacing
285/66r w/18x9 and 5.5-5.75" back spacing
305/55r w/20x9 and 5" back spacing
*Trimming may be required*

Installation

Est. Installation: 4 hours
Difficulty Level (easy 1 - 5 complicated): 3

Instructions
PDF (click here) 1 of 2
PDF (click here) 2 of 2


Vehicle Fitment Data

Make Model Lift Year Range
Ford Ranger 4WD 3.5" 2019-2020

Base Kit Components

These components are subject to change based upon your selections.

Qty Part# Description
(1) 013350 2019-2020 Ford Ranger Coilover 2.5"-3.5"
(1) 123614 2019-2020 Ford Ranger Intrusion Beam Kit
(1) 88306156 KIT: 19-ON Ford Ranger, US Only, Front,
(2) 98224880 Fox 2.0 Shock 26.35 x 16.75 x 2- EB1/EB1

IMPORTANT COVID-19 NOTE: 
Our warehouses are open and continuing to ship orders. However, please note that nearly all automotive parts manufacturers, distribution centers, and logistics centers face backorders and delays in order fulfillment.
 
If an item is unexpectedly out of stock or delayed,  Trident Trucks will make an effort to notify the customer, provide order status updates, and expedite the fulfillment process. If you have any questions pertaining to your order status, please use the Contact link above. We thank you for your patience and understanding.
 
Product Availability

To check stock levels, use our Live-Chat feature or Contact page. See the Lead Times tab for average order fulfillment times by manufacturer.

Note that some items ship directly from the manufacturer. For these items, the manufacturer may not provide real-time inventory data to Trident Trucks and backorders are possible. If an item is unavailable, Trident Trucks will contact the buyer with an estimated ship date. In the event of excessive manufacturer backorders or delays, Trident Trucks may opt to cancel the order and provide a full refund.

Shipping

Trident Trucks provides shipping within the contiguous 48 states only. For orders outside of this area, please use the Contact page prior to placing your order. Items shipped by ground or LTL generally arrive within 1-5 days from date of shipment. Trident Trucks is not responsible for carrier shipping delays.

Returns & Refunds

Items in their original condition may be returned within 30 days from the date of purchase for a full refund. Items may NOT be returned once packaging has been opened or the item has been installed, otherwise used, or damaged. The buyer is responsible for all return shipping charges. Returns and refunds may be requested through the Contact page.

Note: Do NOT ship items back until you have received a return authorization, as items may be returned to a facility other than their point of origin. Refunds will generally be processed within 48 business hours of receipt at our warehouse in order to allow for inspection and processing.

Product Data
Trident Trucks provides product data (including but not limited to item descriptions, important notes, and fitment information) as a courtesy only. This information is provided by product manufacturers and is assumed to be accurate at the time of publishing. Though Trident Trucks may periodically audit and update some product information based upon manufacturer's published data revisions, Trident Trucks does not guarantee the accuracy of any product data. Trident Trucks reserves the right to update product data as necessary and without notice, and will not be held responsible for misprints, or changes/variations made by vehicle manufacturers. Customers should consult the product manufacturer's website for the most up-to-date product data.
 
Markdown & Open Box Items
Markdown and Open Box items are offered at a discount as they have either been overstocked, slightly damaged, and/or returned from a previous customer. Items are sold "as-is." Trident Trucks will indicate any damage found during the inspection process. Please note that this does not guarantee that all defects have been identified. Sales for all items in this category are final. No refunds, exchanges, or replacements are permitted. Some manufacturers may continue to warranty such items; however, the purchaser accepts that some manufacturers may not extend warranties to items in this category. Please refer to the individual product manufacturer's warranty page for details.

F.A.Q.
How do I request a return?
Use the Contact page, ensuring to include your order number, contact information, items for return, and reason for return. One of our team members will contact you with return shipping details and instructions. Additional information and documentation may be required.
Note: Some items must be returned directly to the manufacturer. Please do not ship items to Trident Trucks prior to return authorization and return instructions.

How do I request a replacement for a missing or damaged part?
Upon receipt, please inspect all orders for completion, accuracy, and damage. If packaging appears to be damaged, ensure to photograph the damage, as this may be required for a shipping carrier claim.
Use the Contact page, ensuring to include your order number, contact information, and description of the incorrect or damaged part(s). One of our team members will contact you to correct the issue.

What product warranties doesTrident Trucks offer?
Product warranties are solely offered by product manufacturers. Please refer to the product manufacturer's warranty statement. In the event of a warranty claim,Trident Trucks is available to assist with the manufacturer's required documentation. Please use the Contact page if assistance is required.
Estimated order processing times for in-stock items.
To check stock levels, use our Live-Chat feature or Contact page.
 
 Manufacturer Estimated Lead Time
BDS Suspension
1-2 Days
Morimoto 1-2 Days
ReadyLIFT Suspensions 1-7 Days
Rough Country 1-2 Days
Zone Offroad 1-2 Days