BDS 2" IFP Coilover Lift Kit (2019-2021 Chevy/GMC 1500 2WD/4WD) (770FSL) BDS 2" IFP Coilover Lift Kit (2019-2021 Chevy/GMC 1500 2WD/4WD) (770FSL) BDS Suspension These 2" FOX coilover systems are designed to build on the stout factory front suspension design on the Chevy/GMC 1500 trucks and take performance to the next level while leveling out the stance.More that just a "leveling kit", at the heart of this 2" system is a pair of specially tuned FOX 2.0 Performance Series IFP coilovers. These non-reservoir coilovers are preset for the correct lift height right out of the box and use a threaded body to allow preload adjustment. They are a direct bolt-in replacement for the factory strut assemblies and improve damper performance featuring a 2.0" extruded and machined 6061 T6 aluminum body for better heat dispersion, along with an internal floating piston (IFP) to eliminate oil aeration, FOX�s proprietary internals, 5/8" hard chrome plated heat treated alloy shaft all preloaded with coil springs ready for easy installation.Also supplied for the front are a pair of performance upper control arms (UCAs) designed for improved strength and suspension travel. Built from thick wall 1.5" tubing, these UCAs utilize an indexed ball joint cup to reposition the upper ball joints and allowing more droop travel. These arms come fully assembled right out of the box with high quality greaseable ball joints and rubber bushings for long life, quiet operation and superior corrosion resistance over uniballs and heims. In the rear of these lift systems the factory leaf springs are retained to result in a level stance in no change in tow/load capacity. A pair of FOX 2.0 performance series IFP shocks are supplied to match the front performance. Important Kit Notes 1. Requires a maximum of 5.5" BS Wheel for tire clearance to the upper ball joint when used on 2-3.5" kits2. Will not fit Denali models equipped with ARC3. Can be used on Trail Boss / AT4 models, but will net 0" lift   Specifications Lift Height Front (base kit): 2" CoiloverRear (base kit): N/A Tire and Wheel Combinations 295/70 w/17x9 and Stock back spacing295/65 w/18x9 and Stock back spacing295/60 w/20x9 and Stock back spacing*Trimming may be required* Installation Est. Installation: 3-4 hoursDifficulty Level (easy 1 - 5 complicated): 3 InstructionsClick Here for PDF 1 of 2 Click Here for PDF 2 of 2   Vehicle Fitment Data Make Model Type Year Range Chevy / GMC 1/2 Ton Truck 2WD Silverado / Sierra 2019-2021 Chevy / GMC 1/2 Ton Truck 4WD Silverado / Sierra 2019-2021 Base Kit Components These components are subject to change based upon your selections. Qty Part# Description (1) 121253 X - 19 GM 1500 Upper Control Arm Kit (2) 98224719 Fox 2.0 Shock 26.85 x 16.75 x 2- EB1/EB1 (2) 98502134 19-ON GM 1500 Front Coilover, PS, 2.0, I

BDS 2" IFP Coilover Lift Kit (2019-2021 Chevy/GMC 1500 2WD/4WD) (770FSL)

Code: 770FSL
$2,410.48
In Stock
Add to Wishlist Add to Compare
  • SEE DISCOUNT AT CHECKOUT PAGE

  • FREE SHIPPING ON ALL ORDERS

  • 30 DAY RETURNS (SEE ORDER POLICES)

These 2" FOX coilover systems are designed to build on the stout factory front suspension design on the Chevy/GMC 1500 trucks and take performance to the next level while leveling out the stance.

More that just a "leveling kit", at the heart of this 2" system is a pair of specially tuned FOX 2.0 Performance Series IFP coilovers. These non-reservoir coilovers are preset for the correct lift height right out of the box and use a threaded body to allow preload adjustment. They are a direct bolt-in replacement for the factory strut assemblies and improve damper performance featuring a 2.0" extruded and machined 6061 T6 aluminum body for better heat dispersion, along with an internal floating piston (IFP) to eliminate oil aeration, FOX�s proprietary internals, 5/8" hard chrome plated heat treated alloy shaft all preloaded with coil springs ready for easy installation.

Also supplied for the front are a pair of performance upper control arms (UCAs) designed for improved strength and suspension travel. Built from thick wall 1.5" tubing, these UCAs utilize an indexed ball joint cup to reposition the upper ball joints and allowing more droop travel. These arms come fully assembled right out of the box with high quality greaseable ball joints and rubber bushings for long life, quiet operation and superior corrosion resistance over uniballs and heims. In the rear of these lift systems the factory leaf springs are retained to result in a level stance in no change in tow/load capacity. A pair of FOX 2.0 performance series IFP shocks are supplied to match the front performance.


Important Kit Notes

1. Requires a maximum of 5.5" BS Wheel for tire clearance to the upper ball joint when used on 2-3.5" kits
2. Will not fit Denali models equipped with ARC
3. Can be used on Trail Boss / AT4 models, but will net 0" lift

 

Specifications

Lift Height

Front (base kit): 2" Coilover
Rear (base kit): N/A

Tire and Wheel Combinations
295/70 w/17x9 and Stock back spacing
295/65 w/18x9 and Stock back spacing
295/60 w/20x9 and Stock back spacing
*Trimming may be required*

Installation

Est. Installation: 3-4 hours
Difficulty Level (easy 1 - 5 complicated): 3

Instructions
Click Here for PDF 1 of 2
Click Here for PDF 2 of 2

 

Vehicle Fitment Data

Make Model Type Year Range
Chevy / GMC 1/2 Ton Truck 2WD Silverado / Sierra 2019-2021
Chevy / GMC 1/2 Ton Truck 4WD Silverado / Sierra 2019-2021

Base Kit Components

These components are subject to change based upon your selections.

Qty Part# Description
(1) 121253 X - 19 GM 1500 Upper Control Arm Kit
(2) 98224719 Fox 2.0 Shock 26.85 x 16.75 x 2- EB1/EB1
(2) 98502134 19-ON GM 1500 Front Coilover, PS, 2.0, I

These 2" FOX coilover systems are designed to build on the stout factory front suspension design on the Chevy/GMC 1500 trucks and take performance to the next level while leveling out the stance.

More that just a "leveling kit", at the heart of this 2" system is a pair of specially tuned FOX 2.0 Performance Series IFP coilovers. These non-reservoir coilovers are preset for the correct lift height right out of the box and use a threaded body to allow preload adjustment. They are a direct bolt-in replacement for the factory strut assemblies and improve damper performance featuring a 2.0" extruded and machined 6061 T6 aluminum body for better heat dispersion, along with an internal floating piston (IFP) to eliminate oil aeration, FOX�s proprietary internals, 5/8" hard chrome plated heat treated alloy shaft all preloaded with coil springs ready for easy installation.

Also supplied for the front are a pair of performance upper control arms (UCAs) designed for improved strength and suspension travel. Built from thick wall 1.5" tubing, these UCAs utilize an indexed ball joint cup to reposition the upper ball joints and allowing more droop travel. These arms come fully assembled right out of the box with high quality greaseable ball joints and rubber bushings for long life, quiet operation and superior corrosion resistance over uniballs and heims. In the rear of these lift systems the factory leaf springs are retained to result in a level stance in no change in tow/load capacity. A pair of FOX 2.0 performance series IFP shocks are supplied to match the front performance.


Important Kit Notes

1. Requires a maximum of 5.5" BS Wheel for tire clearance to the upper ball joint when used on 2-3.5" kits
2. Will not fit Denali models equipped with ARC
3. Can be used on Trail Boss / AT4 models, but will net 0" lift

 

Specifications

Lift Height

Front (base kit): 2" Coilover
Rear (base kit): N/A

Tire and Wheel Combinations
295/70 w/17x9 and Stock back spacing
295/65 w/18x9 and Stock back spacing
295/60 w/20x9 and Stock back spacing
*Trimming may be required*

Installation

Est. Installation: 3-4 hours
Difficulty Level (easy 1 - 5 complicated): 3

Instructions
Click Here for PDF 1 of 2
Click Here for PDF 2 of 2

 

Vehicle Fitment Data

Make Model Type Year Range
Chevy / GMC 1/2 Ton Truck 2WD Silverado / Sierra 2019-2021
Chevy / GMC 1/2 Ton Truck 4WD Silverado / Sierra 2019-2021

Base Kit Components

These components are subject to change based upon your selections.

Qty Part# Description
(1) 121253 X - 19 GM 1500 Upper Control Arm Kit
(2) 98224719 Fox 2.0 Shock 26.85 x 16.75 x 2- EB1/EB1
(2) 98502134 19-ON GM 1500 Front Coilover, PS, 2.0, I

IMPORTANT COVID-19 NOTE: 
Our warehouses are open and continuing to ship orders. However, please note that nearly all automotive parts manufacturers, distribution centers, and logistics centers face backorders and delays in order fulfillment.
 
If an item is unexpectedly out of stock or delayed,  Trident Trucks will make an effort to notify the customer, provide order status updates, and expedite the fulfillment process. If you have any questions pertaining to your order status, please use the Contact link above. We thank you for your patience and understanding.
 
Product Availability

See the Lead Times tab for average order fulfillment times by manufacturer. Note that some items ship directly from the manufacturer. For these items, the manufacturer may not provide real-time inventory data to Trident Trucks and backorders are possible. If an item is unavailable, Trident Trucks will contact the buyer with an estimated in-stock and shipping date. Trident Trucks may issue a full refund in the event of a backordered item.

Shipping

Trident Trucks provides shipping within the continental United States only. For orders outside of this area, please use the Contact page prior to placing your order. Items shipped by ground or LTL generally arrive within 1-5 days from date of shipment. Trident Trucks is not responsible for carrier shipping delays.

Returns & Refunds

Items in their original condition may be returned within 30 days from the date of purchase for a full refund. Items may NOT be returned once packaging has been opened or the item has been installed, otherwise used, or damaged. The buyer is responsible for all return shipping charges. Returns and refunds may be requested through the Contact page.

Note: Do NOT ship items back until you have received a return authorization, as items may be returned to a facility other than their point of origin. Refunds will generally be processed within 48 business hours of receipt at our warehouse in order to allow for inspection and processing.

Product Data
Trident Trucks provides product data (including but not limited to item descriptions, important notes, and fitment information) as a courtesy only. This information is provided by product manufacturers and is assumed to be accurate at the time of publishing. Though Trident Trucks may periodically audit and update some product information based upon manufacturer's published data revisions, Trident Trucks does not guarantee the accuracy of any product data. Trident Trucks reserves the right to update product data as necessary and without notice, and will not be held responsible for misprints, or changes/variations made by vehicle manufacturers. Customers should consult the product manufacturer's website for the most up-to-date product data.
 
Markdown & Open Box Items
Markdown and Open Box items are offered at a discount as they have either been overstocked, slightly damaged, and/or returned from a previous customer. Items are sold "as-is." Trident Trucks will indicate any damage found during the inspection process. Please note that this does not guarantee that all defects have been identified. Sales for all items in this category are final. No refunds, exchanges, or replacements are permitted. Some manufacturers may continue to warranty such items; however, the purchaser accepts that some manufacturers may not extend warranties to items in this category. Please refer to the individual product manufacturer's warranty page for details.

F.A.Q.
How do I request a return?
Use the Contact page, ensuring to include your order number, contact information, items for return, and reason for return. One of our team members will contact you with return shipping details and instructions. Additional information and documentation may be required.
Note: Some items must be returned directly to the manufacturer. Please do not ship items to Trident Trucks prior to return authorization and return instructions.

How do I request a replacement for a missing or damaged part?
Upon receipt, please inspect all orders for completion, accuracy, and damage. If packaging appears to be damaged, ensure to photograph the damage, as this may be required for a shipping carrier claim.
Use the Contact page, ensuring to include your order number, contact information, and description of the incorrect or damaged part(s). One of our team members will contact you to correct the issue.

What product warranties doesTrident Trucks offer?
Product warranties are solely offered by product manufacturers. Please refer to the product manufacturer's warranty statement. In the event of a warranty claim,Trident Trucks is available to assist with the manufacturer's required documentation. Please use the Contact page if assistance is required.
Estimated manufacturer order processing times for in-stock items.
 
 Manufacturer Estimated Lead Time
BDS Suspension 1 Week
Rough Country 1-2 Days
Zone Offroad 1-2 Days