BDS 1.5" DSC Coilover Lift Kit (2019-2021 Chevy/GMC 1500 4WD Trail Boss/AT4) (773FDSC) BDS 1.5" DSC Coilover Lift Kit (2019-2021 Chevy/GMC 1500 4WD Trail Boss/AT4) (773FDSC) BDS Suspension 1.5" Coilover Systems for Chevy Trail Boss or GMC AT4. These 1.5" DSC Coilover Systems are designed to build on the stout factory front suspension design on Chevy Silverado 1500 Trail Boss and GMC Sierra 1500 AT4 trucks and take performance to the next level.Based on the 3.5" kits for the standard GM trucks and will net 1.5" over the factory taller ride height of the Trail Boss/AT4. At the heart of these 1.5" systems are a pair of specially tuned FOX 2.5 factory race series DSC coilovers. These coilovers are backed by FOX's racing pedigree, preset for the correct lift height right out of the box to provide optimal performance and direct bolt-in replacement for the factory strut assemblies. They feature a smooth bore and honed seamless alloy body, 7/8" hardened steel carbon shaft, Eibach coil springs and black anodized machined 6061-T6 billet aluminum mounts along with remote reservoirs with mounting brackets. The DSC (dual speed compression) reservoir allows for easy tool-free adjustment of high-speed and low-speed compression adjustment settings to further dial in the damping to the terrain and ride preferences. Also supplied for the front end are a pair of performance upper control arms (UCAs) designed for improved strength and suspension travel. Built from thick wall 1.5" DOM tubing, these UCAs utilize an indexed ball joint cup to reposition the upper ball joints and allowing more droop travel. These arms come fully assembled right out of the box with high quality greaseable ball joints and rubber bushings for long life, quiet operation and superior corrosion resistance over uniballs and heims.In the rear of these lift systems the factory leaf springs are retained and 2" lift comes from a replacement set of lift blocks. Also supplied for the rear of these systems are your choice of FOX 2.0 performance series IFP shocks or upgraded FOX 2.5 factory series shocks to match the front performance and adjustability. These kits come finished in a durable black powdercoat finish and sent with all hardware packs to complete the install along with step-by-step installation instructions.All BDS kits include Factory Protection Plus for the ultimate extended warranty to include BDS's No Fine Print Warranty, ESC System compatibility and a 5year-100,000 mile drivetrain warranty to match the dealer. Improve the look and capability of your 2019-2020 Trail Boss or AT4 truck with these new 1.5" coilover lift systems from BDS Suspension. Important Kit Notes 1. 5.5" max wheel backspacing can be used2. Will not fit Denali models with ARC Specifications Lift HeightFront (base kit): 1.5" CoiloversRear (base kit): 2.5" Block Tire and Wheel Combinations 35x12.50 w/20x9 and 5.5 (Chevy) back spacing33x12.50 w/20x9 and 5.5 (GMC) back spacing*Trimming may be required* Installation Est. Installation: 4-5 hoursDifficulty Level (easy 1 - 5 complicated): 3 InstructionsClick Here for PDF 1 of 1 Vehicle Fitment Data Make Model Type Year Range Chevy / GMC 1/2 Ton Truck 4WD Trail Boss / AT4 2019-2021 Base Kit Components These components are subject to change based upon your selections. Qty Part# Description (1) 011350 2019 GM 1500 Coilover 3.5" Box Kit (1) 88306162 Kit: 19-ON GM 1500, w/UCA, Front Coilove (2) 98224719 Fox 2.0 Shock 26.85 x 16.75 x 2- EB1/EB1

BDS 1.5" DSC Coilover Lift Kit (2019-2021 Chevy/GMC 1500 4WD Trail Boss/AT4) (773FDSC)

Code: 773FDSC
$3,825.48
In Stock
Add to Wishlist Add to Compare
  • SEE DISCOUNT AT CHECKOUT PAGE

  • FREE SHIPPING ON ALL ORDERS

  • 30 DAY RETURNS (SEE ORDER POLICES)

1.5" Coilover Systems for Chevy Trail Boss or GMC AT4.

These 1.5" DSC Coilover Systems are designed to build on the stout factory front suspension design on Chevy Silverado 1500 Trail Boss and GMC Sierra 1500 AT4 trucks and take performance to the next level.

Based on the 3.5" kits for the standard GM trucks and will net 1.5" over the factory taller ride height of the Trail Boss/AT4. At the heart of these 1.5" systems are a pair of specially tuned FOX 2.5 factory race series DSC coilovers. These coilovers are backed by FOX's racing pedigree, preset for the correct lift height right out of the box to provide optimal performance and direct bolt-in replacement for the factory strut assemblies. They feature a smooth bore and honed seamless alloy body, 7/8" hardened steel carbon shaft, Eibach coil springs and black anodized machined 6061-T6 billet aluminum mounts along with remote reservoirs with mounting brackets. The DSC (dual speed compression) reservoir allows for easy tool-free adjustment of high-speed and low-speed compression adjustment settings to further dial in the damping to the terrain and ride preferences. Also supplied for the front end are a pair of performance upper control arms (UCAs) designed for improved strength and suspension travel. Built from thick wall 1.5" DOM tubing, these UCAs utilize an indexed ball joint cup to reposition the upper ball joints and allowing more droop travel. These arms come fully assembled right out of the box with high quality greaseable ball joints and rubber bushings for long life, quiet operation and superior corrosion resistance over uniballs and heims.

In the rear of these lift systems the factory leaf springs are retained and 2" lift comes from a replacement set of lift blocks. Also supplied for the rear of these systems are your choice of FOX 2.0 performance series IFP shocks or upgraded FOX 2.5 factory series shocks to match the front performance and adjustability. These kits come finished in a durable black powdercoat finish and sent with all hardware packs to complete the install along with step-by-step installation instructions.

All BDS kits include Factory Protection Plus for the ultimate extended warranty to include BDS's No Fine Print Warranty, ESC System compatibility and a 5year-100,000 mile drivetrain warranty to match the dealer. Improve the look and capability of your 2019-2020 Trail Boss or AT4 truck with these new 1.5" coilover lift systems from BDS Suspension.

Important Kit Notes

1. 5.5" max wheel backspacing can be used
2. Will not fit Denali models with ARC

Specifications

Lift Height
Front (base kit): 1.5" Coilovers
Rear (base kit): 2.5" Block

Tire and Wheel Combinations
35x12.50 w/20x9 and 5.5 (Chevy) back spacing
33x12.50 w/20x9 and 5.5 (GMC) back spacing
*Trimming may be required*

Installation

Est. Installation: 4-5 hours
Difficulty Level (easy 1 - 5 complicated): 3

Instructions
Click Here for PDF 1 of 1

Vehicle Fitment Data

Make Model Type Year Range
Chevy / GMC 1/2 Ton Truck 4WD Trail Boss / AT4 2019-2021

Base Kit Components

These components are subject to change based upon your selections.

Qty Part# Description
(1) 011350 2019 GM 1500 Coilover 3.5" Box Kit
(1) 88306162 Kit: 19-ON GM 1500, w/UCA, Front Coilove
(2) 98224719 Fox 2.0 Shock 26.85 x 16.75 x 2- EB1/EB1

1.5" Coilover Systems for Chevy Trail Boss or GMC AT4.

These 1.5" DSC Coilover Systems are designed to build on the stout factory front suspension design on Chevy Silverado 1500 Trail Boss and GMC Sierra 1500 AT4 trucks and take performance to the next level.

Based on the 3.5" kits for the standard GM trucks and will net 1.5" over the factory taller ride height of the Trail Boss/AT4. At the heart of these 1.5" systems are a pair of specially tuned FOX 2.5 factory race series DSC coilovers. These coilovers are backed by FOX's racing pedigree, preset for the correct lift height right out of the box to provide optimal performance and direct bolt-in replacement for the factory strut assemblies. They feature a smooth bore and honed seamless alloy body, 7/8" hardened steel carbon shaft, Eibach coil springs and black anodized machined 6061-T6 billet aluminum mounts along with remote reservoirs with mounting brackets. The DSC (dual speed compression) reservoir allows for easy tool-free adjustment of high-speed and low-speed compression adjustment settings to further dial in the damping to the terrain and ride preferences. Also supplied for the front end are a pair of performance upper control arms (UCAs) designed for improved strength and suspension travel. Built from thick wall 1.5" DOM tubing, these UCAs utilize an indexed ball joint cup to reposition the upper ball joints and allowing more droop travel. These arms come fully assembled right out of the box with high quality greaseable ball joints and rubber bushings for long life, quiet operation and superior corrosion resistance over uniballs and heims.

In the rear of these lift systems the factory leaf springs are retained and 2" lift comes from a replacement set of lift blocks. Also supplied for the rear of these systems are your choice of FOX 2.0 performance series IFP shocks or upgraded FOX 2.5 factory series shocks to match the front performance and adjustability. These kits come finished in a durable black powdercoat finish and sent with all hardware packs to complete the install along with step-by-step installation instructions.

All BDS kits include Factory Protection Plus for the ultimate extended warranty to include BDS's No Fine Print Warranty, ESC System compatibility and a 5year-100,000 mile drivetrain warranty to match the dealer. Improve the look and capability of your 2019-2020 Trail Boss or AT4 truck with these new 1.5" coilover lift systems from BDS Suspension.

Important Kit Notes

1. 5.5" max wheel backspacing can be used
2. Will not fit Denali models with ARC

Specifications

Lift Height
Front (base kit): 1.5" Coilovers
Rear (base kit): 2.5" Block

Tire and Wheel Combinations
35x12.50 w/20x9 and 5.5 (Chevy) back spacing
33x12.50 w/20x9 and 5.5 (GMC) back spacing
*Trimming may be required*

Installation

Est. Installation: 4-5 hours
Difficulty Level (easy 1 - 5 complicated): 3

Instructions
Click Here for PDF 1 of 1

Vehicle Fitment Data

Make Model Type Year Range
Chevy / GMC 1/2 Ton Truck 4WD Trail Boss / AT4 2019-2021

Base Kit Components

These components are subject to change based upon your selections.

Qty Part# Description
(1) 011350 2019 GM 1500 Coilover 3.5" Box Kit
(1) 88306162 Kit: 19-ON GM 1500, w/UCA, Front Coilove
(2) 98224719 Fox 2.0 Shock 26.85 x 16.75 x 2- EB1/EB1

IMPORTANT COVID-19 NOTE: 
Our warehouses are open and continuing to ship orders. However, please note that nearly all automotive parts manufacturers, distribution centers, and logistics centers face backorders and delays in order fulfillment.
 
If an item is unexpectedly out of stock or delayed,  Trident Trucks will make an effort to notify the customer, provide order status updates, and expedite the fulfillment process. If you have any questions pertaining to your order status, please use the Contact link above. We thank you for your patience and understanding.
 
Product Availability

See the Lead Times tab for average order fulfillment times by manufacturer. Note that some items ship directly from the manufacturer. For these items, the manufacturer may not provide real-time inventory data to Trident Trucks and backorders are possible. If an item is unavailable, Trident Trucks will contact the buyer with an estimated in-stock and shipping date. Trident Trucks may issue a full refund in the event of a backordered item.

Shipping

Trident Trucks provides shipping within the continental United States only. For orders outside of this area, please use the Contact page prior to placing your order. Items shipped by ground or LTL generally arrive within 1-5 days from date of shipment. Trident Trucks is not responsible for carrier shipping delays.

Returns & Refunds

Items in their original condition may be returned within 30 days from the date of purchase for a full refund. Items may NOT be returned once packaging has been opened or the item has been installed, otherwise used, or damaged. The buyer is responsible for all return shipping charges. Returns and refunds may be requested through the Contact page.

Note: Do NOT ship items back until you have received a return authorization, as items may be returned to a facility other than their point of origin. Refunds will generally be processed within 48 business hours of receipt at our warehouse in order to allow for inspection and processing.

Product Data
Trident Trucks provides product data (including but not limited to item descriptions, important notes, and fitment information) as a courtesy only. This information is provided by product manufacturers and is assumed to be accurate at the time of publishing. Though Trident Trucks may periodically audit and update some product information based upon manufacturer's published data revisions, Trident Trucks does not guarantee the accuracy of any product data. Trident Trucks reserves the right to update product data as necessary and without notice, and will not be held responsible for misprints, or changes/variations made by vehicle manufacturers. Customers should consult the product manufacturer's website for the most up-to-date product data.
 
Markdown & Open Box Items
Markdown and Open Box items are offered at a discount as they have either been overstocked, slightly damaged, and/or returned from a previous customer. Items are sold "as-is." Trident Trucks will indicate any damage found during the inspection process. Please note that this does not guarantee that all defects have been identified. Sales for all items in this category are final. No refunds, exchanges, or replacements are permitted. Some manufacturers may continue to warranty such items; however, the purchaser accepts that some manufacturers may not extend warranties to items in this category. Please refer to the individual product manufacturer's warranty page for details.

F.A.Q.
How do I request a return?
Use the Contact page, ensuring to include your order number, contact information, items for return, and reason for return. One of our team members will contact you with return shipping details and instructions. Additional information and documentation may be required.
Note: Some items must be returned directly to the manufacturer. Please do not ship items to Trident Trucks prior to return authorization and return instructions.

How do I request a replacement for a missing or damaged part?
Upon receipt, please inspect all orders for completion, accuracy, and damage. If packaging appears to be damaged, ensure to photograph the damage, as this may be required for a shipping carrier claim.
Use the Contact page, ensuring to include your order number, contact information, and description of the incorrect or damaged part(s). One of our team members will contact you to correct the issue.

What product warranties doesTrident Trucks offer?
Product warranties are solely offered by product manufacturers. Please refer to the product manufacturer's warranty statement. In the event of a warranty claim,Trident Trucks is available to assist with the manufacturer's required documentation. Please use the Contact page if assistance is required.
Estimated manufacturer order processing times for in-stock items.
 
 Manufacturer Estimated Lead Time
BDS Suspension 1 Week
Rough Country 1-2 Days
Zone Offroad 1-2 Days