Rough Country 2.5-3 Inch Leveling Kit | Toyota Tundra 2WD/4WD (2007-2021) (870) Rough Country 2.5-3 Inch Leveling Kit | Toyota Tundra 2WD/4WD (2007-2021) (870) Rough Country Rough Country's 2.5" - 3" Leveling Suspension Kit for Toyota Tundra is the most innovative way for you to level the front of your vehicle with the rear, allowing you to dial in the angle you desire. Featuring a set of front, upper strut extensions, this kit can accommodate up to a 33" tire. This kit now includes two sets of 0.25" spacer shims, which can be used in addition to the strut spacers to fine-tune your level angle. Each shim provides roughly 3/8" of lift. Use both for a full 3" level, or fewer to leave a little rake in the front end angle - this is specifically great for individuals who prefer a slight nose down look for an aggressive head-on view, or routinely pull trailers and haul items that would potentially draw the nose up from a full level stance. Designed by Rough Country's in-house Research and Development team, these components are engineered for a precise fit and incorporate superbly with factory equipment. A set of skid plate spacers allow use of the stock skid plate, and all components are easily removable should the vehicle need to be returned to stock height. A set of differential spacers help maintain factory ride quality, promoting optimum angles for the front CV axle after lifting. 100 % bolt-on installation makes setup a breeze, and all components are protected by Rough Country's Lifetime Replacement Warranty.**ALWAYS READIMPORTANT NOTES AND FITMENT SECTIONS PRIOR TO MAKING PURCHASE**Features- Easy bolt-on installation- Increased ground clearance- Maintains factory ride quality- Levels the front with the rear of the vehicle- Differential spacers maintain proper front CV axle angle.- Strut spacer kit requires no strut disassembly or strut compressor for installation. [870]- Strut spacer kit features adjustable shim plates that allow you to fine tune the front amount of lift. [870]Important Notes- Does NOT fit Pro Series models- Does NOT fit XSP-X models.- Strut spacer kit shims may not be required for TRD models- Optional lifted struts are non-adjustable and give 3-inches of front liftSpecsEst. Install Time2-3 hoursFront Components: - Upper strut extensions- Differential mounting spacers- Skid plate spacers- Bump Stops- HardwareRear Components: - N/AInstructionsClick Here for InstructionsFitment2007-2021 2WD Toyota Tundra 2007-2021 4WD Toyota TundraRecommended Wheel & Tire Combinations Tire Wheel Bolt Pattern Offset Note 305/65R18 Factory 18 5x150 - -

Rough Country 2.5-3 Inch Leveling Kit | Toyota Tundra 2WD/4WD (2007-2021) (870)

Code: 870
$139.95
In Stock
  • FREE SHIPPING

  • 30 DAY RETURNS

  • LIVE SUPPORT

Rough Country's 2.5" - 3" Leveling Suspension Kit for Toyota Tundra is the most innovative way for you to level the front of your vehicle with the rear, allowing you to dial in the angle you desire. Featuring a set of front, upper strut extensions, this kit can accommodate up to a 33" tire. This kit now includes two sets of 0.25" spacer shims, which can be used in addition to the strut spacers to fine-tune your level angle. Each shim provides roughly 3/8" of lift. Use both for a full 3" level, or fewer to leave a little rake in the front end angle - this is specifically great for individuals who prefer a slight nose down look for an aggressive head-on view, or routinely pull trailers and haul items that would potentially draw the nose up from a full level stance. Designed by Rough Country's in-house Research and Development team, these components are engineered for a precise fit and incorporate superbly with factory equipment. A set of skid plate spacers allow use of the stock skid plate, and all components are easily removable should the vehicle need to be returned to stock height. A set of differential spacers help maintain factory ride quality, promoting optimum angles for the front CV axle after lifting. 100 % bolt-on installation makes setup a breeze, and all components are protected by Rough Country's Lifetime Replacement Warranty.

**ALWAYS READIMPORTANT NOTES AND FITMENT SECTIONS PRIOR TO MAKING PURCHASE**

Features

- Easy bolt-on installation
- Increased ground clearance
- Maintains factory ride quality
- Levels the front with the rear of the vehicle
- Differential spacers maintain proper front CV axle angle.
- Strut spacer kit requires no strut disassembly or strut compressor for installation. [870]
- Strut spacer kit features adjustable shim plates that allow you to fine tune the front amount of lift. [870]

Important Notes

- Does NOT fit Pro Series models
- Does NOT fit XSP-X models.
- Strut spacer kit shims may not be required for TRD models
- Optional lifted struts are non-adjustable and give 3-inches of front lift

Specs

Est. Install Time

2-3 hours

Front Components:

- Upper strut extensions
- Differential mounting spacers
- Skid plate spacers
- Bump Stops
- Hardware

Rear Components:

- N/A


Instructions

Click Here for Instructions

Fitment

2007-2021 2WD Toyota Tundra
2007-2021 4WD Toyota Tundra

Recommended Wheel & Tire Combinations

Tire Wheel Bolt Pattern Offset Note
305/65R18 Factory 18 5x150 - -

Rough Country's 2.5" - 3" Leveling Suspension Kit for Toyota Tundra is the most innovative way for you to level the front of your vehicle with the rear, allowing you to dial in the angle you desire. Featuring a set of front, upper strut extensions, this kit can accommodate up to a 33" tire. This kit now includes two sets of 0.25" spacer shims, which can be used in addition to the strut spacers to fine-tune your level angle. Each shim provides roughly 3/8" of lift. Use both for a full 3" level, or fewer to leave a little rake in the front end angle - this is specifically great for individuals who prefer a slight nose down look for an aggressive head-on view, or routinely pull trailers and haul items that would potentially draw the nose up from a full level stance. Designed by Rough Country's in-house Research and Development team, these components are engineered for a precise fit and incorporate superbly with factory equipment. A set of skid plate spacers allow use of the stock skid plate, and all components are easily removable should the vehicle need to be returned to stock height. A set of differential spacers help maintain factory ride quality, promoting optimum angles for the front CV axle after lifting. 100 % bolt-on installation makes setup a breeze, and all components are protected by Rough Country's Lifetime Replacement Warranty.

**ALWAYS READIMPORTANT NOTES AND FITMENT SECTIONS PRIOR TO MAKING PURCHASE**

Features

- Easy bolt-on installation
- Increased ground clearance
- Maintains factory ride quality
- Levels the front with the rear of the vehicle
- Differential spacers maintain proper front CV axle angle.
- Strut spacer kit requires no strut disassembly or strut compressor for installation. [870]
- Strut spacer kit features adjustable shim plates that allow you to fine tune the front amount of lift. [870]

Important Notes

- Does NOT fit Pro Series models
- Does NOT fit XSP-X models.
- Strut spacer kit shims may not be required for TRD models
- Optional lifted struts are non-adjustable and give 3-inches of front lift

Specs

Est. Install Time

2-3 hours

Front Components:

- Upper strut extensions
- Differential mounting spacers
- Skid plate spacers
- Bump Stops
- Hardware

Rear Components:

- N/A


Instructions

Click Here for Instructions

Fitment

2007-2021 2WD Toyota Tundra
2007-2021 4WD Toyota Tundra

Recommended Wheel & Tire Combinations

Tire Wheel Bolt Pattern Offset Note
305/65R18 Factory 18 5x150 - -
IMPORTANT COVID-19 NOTE: 
Our warehouses are open and continuing to ship orders. However, please note that nearly all automotive parts manufacturers, distribution centers, and logistics centers face backorders and delays in order fulfillment.
 
If an item is unexpectedly out of stock or delayed,  Trident Trucks will make an effort to notify the customer, provide order status updates, and expedite the fulfillment process. If you have any questions pertaining to your order status, please use the Contact link above. We thank you for your patience and understanding.
 
Product Availability

To check stock levels, use our Live-Chat feature or Contact page. See the Lead Times tab for average order fulfillment times by manufacturer.

Note that some items ship directly from the manufacturer. For these items, the manufacturer may not provide real-time inventory data to Trident Trucks and backorders are possible. If an item is unavailable, Trident Trucks will contact the buyer with an estimated ship date. In the event of excessive manufacturer backorders or delays, Trident Trucks may opt to cancel the order and provide a full refund.

Shipping

Trident Trucks provides shipping within the contiguous 48 states only. For orders outside of this area, please use the Contact page prior to placing your order. Items shipped by ground or LTL generally arrive within 1-5 days from date of shipment. Trident Trucks is not responsible for carrier shipping delays.

Returns & Refunds

Items in their original condition may be returned within 30 days from the date of purchase for a full refund. Items may NOT be returned once packaging has been opened or the item has been installed, otherwise used, or damaged. The buyer is responsible for all return shipping charges. Returns and refunds may be requested through the Contact page.

Note: Do NOT ship items back until you have received a return authorization, as items may be returned to a facility other than their point of origin. Refunds will generally be processed within 48 business hours of receipt at our warehouse in order to allow for inspection and processing.

Product Data
Trident Trucks provides product data (including but not limited to item descriptions, important notes, and fitment information) as a courtesy only. This information is provided by product manufacturers and is assumed to be accurate at the time of publishing. Though Trident Trucks may periodically audit and update some product information based upon manufacturer's published data revisions, Trident Trucks does not guarantee the accuracy of any product data. Trident Trucks reserves the right to update product data as necessary and without notice, and will not be held responsible for misprints, or changes/variations made by vehicle manufacturers. Customers should consult the product manufacturer's website for the most up-to-date product data.
 
Markdown & Open Box Items
Markdown and Open Box items are offered at a discount as they have either been overstocked, slightly damaged, and/or returned from a previous customer. Items are sold "as-is." Trident Trucks will indicate any damage found during the inspection process. Please note that this does not guarantee that all defects have been identified. Sales for all items in this category are final. No refunds, exchanges, or replacements are permitted. Some manufacturers may continue to warranty such items; however, the purchaser accepts that some manufacturers may not extend warranties to items in this category. Please refer to the individual product manufacturer's warranty page for details.

F.A.Q.
How do I request a return?
Use the Contact page, ensuring to include your order number, contact information, items for return, and reason for return. One of our team members will contact you with return shipping details and instructions. Additional information and documentation may be required.
Note: Some items must be returned directly to the manufacturer. Please do not ship items to Trident Trucks prior to return authorization and return instructions.

How do I request a replacement for a missing or damaged part?
Upon receipt, please inspect all orders for completion, accuracy, and damage. If packaging appears to be damaged, ensure to photograph the damage, as this may be required for a shipping carrier claim.
Use the Contact page, ensuring to include your order number, contact information, and description of the incorrect or damaged part(s). One of our team members will contact you to correct the issue.

What product warranties doesTrident Trucks offer?
Product warranties are solely offered by product manufacturers. Please refer to the product manufacturer's warranty statement. In the event of a warranty claim,Trident Trucks is available to assist with the manufacturer's required documentation. Please use the Contact page if assistance is required.
Estimated order processing times for in-stock items.
To check stock levels, use our Live-Chat feature or Contact page.
 
 Manufacturer Estimated Lead Time
BDS Suspension
1-2 Days
Morimoto 1-2 Days
ReadyLIFT Suspensions 1-7 Days
Rough Country 1-2 Days
Zone Offroad 1-2 Days