Zone Offroad 6" Radius Arm Lift Kit (2008-2010 Ford Super Duty 4WD Gas) (ZONF37 / ZONF36) Zone Offroad 6" Radius Arm Lift Kit (2008-2010 Ford Super Duty 4WD Gas) (ZONF37 / ZONF36) Zone Offroad When you go big you can go anywhere. This 6" Radius Arm Lift Kit puts your truck into a class of its own, letting you clear huge 37" tires. Get the look and performance you want out of your 4WD 2008 - 2010 Ford F-250 / F-350. **READ IMPORTANT NOTES AND FITMENT SECTIONS BELOW PRIOR TO MAKING PURCHASE** QUICK SPECS Front Lift Height 6" Rear Lift Height 4" Material Metal Front Lift Method Coil Springs & Replacement Radius Arms Rear Lift Method Dual Add-A-Leafs & Block Kit Lift Type Lift Kit Wheel Size 17 x 9 Back Spacing 4.5" Max Tire Size 37 x 12.5 Wheel Size 2 18 x 9 Back Spacing 2 4.5" Max Tire Size 2 37 x 12.5 Wheel Size 3 20 x 9 Back Spacing 3 4.5" Max Tire Size 3 37 x 12.5 Finish Powdercoat Metal Cutting Required No Accommodates Factory Wheels See Notes Welding Required No FEATURES Brake line relocation brackets allow re-use of factory brake lines. Bump stop extensions properly limit up-travel, protecting your vehicle. Dual rear Add-A-Leaf Kit provides additional lift and improves weight capacity. Heavy-duty radius arms improve strength, allow additional tire clearance and increase ground clearance over radius arm drop kits. High-strength, 1/4" steel radius arms correct caster, improve tire clearance, and maximize ground clearance. Rear lift block and longer U-bolts for easy installation and level stance. Steering components included to ensure smooth post-installation operation of steering system and factory-consistent vehicle handling characteristics. Sway bar relocation brackets maintain operating angle for reduced body roll. IN THE BOX Add-A-Leaf's All Necessary Mounting / Installation Hardware Coil Springs Dropped Pitman Arm Rear Lift Block & U-Bolt Kit Sway Bar Relocation Brackets Radius Arms IMPORTANT NOTES This kit is NOT designed for dually models, but may me easily adapted to accommodate your truck. Please contact customer support and they will help you find a solution. Driveline: Although extremely rare, front and/or rear driveline vibration may occur and require driveline modification. Factory wheels fit when paired with factory / original equipment tire size. Lift Block Selection: This lift will require replacing your truck’s factory rear block to achieve a level stance; total height gained will vary depending on the size of the factory block. Mod's Required: Exhaust modification may be required to clear the front driveshaft on gas models. See installation instructions for more information. Two-piece rear drive shaft? Add a carrier bearing drop kit to reduce post-lift driveline angles and avoid / eliminate driveshaft vibration. INSTALLATION Instructions Click Here for Installation Guide Specifications Install Time Hours 6 hrs Difficulty Level 3 out of 5 (1: Easiest 5: Most Difficult)   FITMENT 2008 Ford F-250 Super Duty 4WD Gas 2008 Ford F-350 Super Duty 4WD Gas 2009 Ford F-250 Super Duty 4WD Gas 2009 Ford F-350 Super Duty 4WD Gas 2010 Ford F-250 Super Duty 4WD Gas 2010 Ford F-350 Super Duty 4WD Gas

Zone Offroad 6" Radius Arm Lift Kit (2008-2010 Ford Super Duty 4WD Gas) (ZONF37 / ZONF36)

Code: ZONF37
$1,395.52
In Stock
Add to Wishlist Add to Compare
  • SEE DISCOUNT AT CHECKOUT PAGE

  • FREE SHIPPING ON ALL ORDERS

  • 30 DAY RETURNS (SEE ORDER POLICES)

When you go big you can go anywhere. This 6" Radius Arm Lift Kit puts your truck into a class of its own, letting you clear huge 37" tires. Get the look and performance you want out of your 4WD 2008 - 2010 Ford F-250 / F-350.

**READ IMPORTANT NOTES AND FITMENT SECTIONS BELOW PRIOR TO MAKING PURCHASE**


QUICK SPECS

Front Lift Height 6"
Rear Lift Height 4"
Material Metal
Front Lift Method Coil Springs & Replacement Radius Arms
Rear Lift Method Dual Add-A-Leafs & Block Kit
Lift Type Lift Kit
Wheel Size 17 x 9
Back Spacing 4.5"
Max Tire Size 37 x 12.5
Wheel Size 2 18 x 9
Back Spacing 2 4.5"
Max Tire Size 2 37 x 12.5
Wheel Size 3 20 x 9
Back Spacing 3 4.5"
Max Tire Size 3 37 x 12.5
Finish Powdercoat
Metal Cutting Required No
Accommodates Factory Wheels See Notes
Welding Required No

FEATURES

  • Brake line relocation brackets allow re-use of factory brake lines.
  • Bump stop extensions properly limit up-travel, protecting your vehicle.
  • Dual rear Add-A-Leaf Kit provides additional lift and improves weight capacity.
  • Heavy-duty radius arms improve strength, allow additional tire clearance and increase ground clearance over radius arm drop kits.
  • High-strength, 1/4" steel radius arms correct caster, improve tire clearance, and maximize ground clearance.
  • Rear lift block and longer U-bolts for easy installation and level stance.
  • Steering components included to ensure smooth post-installation operation of steering system and factory-consistent vehicle handling characteristics.
  • Sway bar relocation brackets maintain operating angle for reduced body roll.

IN THE BOX

  • Add-A-Leaf's
  • All Necessary Mounting / Installation Hardware
  • Coil Springs
  • Dropped Pitman Arm
  • Rear Lift Block & U-Bolt Kit
  • Sway Bar Relocation Brackets
  • Radius Arms

IMPORTANT NOTES

  • This kit is NOT designed for dually models, but may me easily adapted to accommodate your truck. Please contact customer support and they will help you find a solution.
  • Driveline: Although extremely rare, front and/or rear driveline vibration may occur and require driveline modification.
  • Factory wheels fit when paired with factory / original equipment tire size.
  • Lift Block Selection: This lift will require replacing your truck’s factory rear block to achieve a level stance; total height gained will vary depending on the size of the factory block.
  • Mod's Required: Exhaust modification may be required to clear the front driveshaft on gas models. See installation instructions for more information.
  • Two-piece rear drive shaft? Add a carrier bearing drop kit to reduce post-lift driveline angles and avoid / eliminate driveshaft vibration.

INSTALLATION

Instructions

Click Here for Installation Guide

Specifications

Install Time Hours 6 hrs
Difficulty Level 3 out of 5

(1: Easiest 5: Most Difficult)

 

FITMENT

  • 2008 Ford F-250 Super Duty 4WD Gas
  • 2008 Ford F-350 Super Duty 4WD Gas
  • 2009 Ford F-250 Super Duty 4WD Gas
  • 2009 Ford F-350 Super Duty 4WD Gas
  • 2010 Ford F-250 Super Duty 4WD Gas
  • 2010 Ford F-350 Super Duty 4WD Gas

When you go big you can go anywhere. This 6" Radius Arm Lift Kit puts your truck into a class of its own, letting you clear huge 37" tires. Get the look and performance you want out of your 4WD 2008 - 2010 Ford F-250 / F-350.

**READ IMPORTANT NOTES AND FITMENT SECTIONS BELOW PRIOR TO MAKING PURCHASE**


QUICK SPECS

Front Lift Height 6"
Rear Lift Height 4"
Material Metal
Front Lift Method Coil Springs & Replacement Radius Arms
Rear Lift Method Dual Add-A-Leafs & Block Kit
Lift Type Lift Kit
Wheel Size 17 x 9
Back Spacing 4.5"
Max Tire Size 37 x 12.5
Wheel Size 2 18 x 9
Back Spacing 2 4.5"
Max Tire Size 2 37 x 12.5
Wheel Size 3 20 x 9
Back Spacing 3 4.5"
Max Tire Size 3 37 x 12.5
Finish Powdercoat
Metal Cutting Required No
Accommodates Factory Wheels See Notes
Welding Required No

FEATURES

  • Brake line relocation brackets allow re-use of factory brake lines.
  • Bump stop extensions properly limit up-travel, protecting your vehicle.
  • Dual rear Add-A-Leaf Kit provides additional lift and improves weight capacity.
  • Heavy-duty radius arms improve strength, allow additional tire clearance and increase ground clearance over radius arm drop kits.
  • High-strength, 1/4" steel radius arms correct caster, improve tire clearance, and maximize ground clearance.
  • Rear lift block and longer U-bolts for easy installation and level stance.
  • Steering components included to ensure smooth post-installation operation of steering system and factory-consistent vehicle handling characteristics.
  • Sway bar relocation brackets maintain operating angle for reduced body roll.

IN THE BOX

  • Add-A-Leaf's
  • All Necessary Mounting / Installation Hardware
  • Coil Springs
  • Dropped Pitman Arm
  • Rear Lift Block & U-Bolt Kit
  • Sway Bar Relocation Brackets
  • Radius Arms

IMPORTANT NOTES

  • This kit is NOT designed for dually models, but may me easily adapted to accommodate your truck. Please contact customer support and they will help you find a solution.
  • Driveline: Although extremely rare, front and/or rear driveline vibration may occur and require driveline modification.
  • Factory wheels fit when paired with factory / original equipment tire size.
  • Lift Block Selection: This lift will require replacing your truck’s factory rear block to achieve a level stance; total height gained will vary depending on the size of the factory block.
  • Mod's Required: Exhaust modification may be required to clear the front driveshaft on gas models. See installation instructions for more information.
  • Two-piece rear drive shaft? Add a carrier bearing drop kit to reduce post-lift driveline angles and avoid / eliminate driveshaft vibration.

INSTALLATION

Instructions

Click Here for Installation Guide

Specifications

Install Time Hours 6 hrs
Difficulty Level 3 out of 5

(1: Easiest 5: Most Difficult)

 

FITMENT

  • 2008 Ford F-250 Super Duty 4WD Gas
  • 2008 Ford F-350 Super Duty 4WD Gas
  • 2009 Ford F-250 Super Duty 4WD Gas
  • 2009 Ford F-350 Super Duty 4WD Gas
  • 2010 Ford F-250 Super Duty 4WD Gas
  • 2010 Ford F-350 Super Duty 4WD Gas
IMPORTANT COVID-19 NOTE: 
Our warehouses are open and continuing to ship orders. However, please note that nearly all automotive parts manufacturers, distribution centers, and logistics centers face backorders and delays in order fulfillment.
 
If an item is unexpectedly out of stock or delayed,  Trident Trucks will make an effort to notify the customer, provide order status updates, and expedite the fulfillment process. If you have any questions pertaining to your order status, please use the Contact link above. We thank you for your patience and understanding.
 
Product Availability

See the Lead Times tab for average order fulfillment times by manufacturer. Note that some items ship directly from the manufacturer. For these items, the manufacturer may not provide real-time inventory data to Trident Trucks and backorders are possible. If an item is unavailable, Trident Trucks will contact the buyer with an estimated in-stock and shipping date. Trident Trucks may issue a full refund in the event of a backordered item.

Shipping

Trident Trucks provides shipping within the continental United States only. For orders outside of this area, please use the Contact page prior to placing your order. Items shipped by ground or LTL generally arrive within 1-5 days from date of shipment. Trident Trucks is not responsible for carrier shipping delays.

Returns & Refunds

Items in their original condition may be returned within 30 days from the date of purchase for a full refund. Items may NOT be returned once packaging has been opened or the item has been installed, otherwise used, or damaged. The buyer is responsible for all return shipping charges. Returns and refunds may be requested through the Contact page.

Note: Do NOT ship items back until you have received a return authorization, as items may be returned to a facility other than their point of origin. Refunds will generally be processed within 48 business hours of receipt at our warehouse in order to allow for inspection and processing.

Product Data
Trident Trucks provides product data (including but not limited to item descriptions, important notes, and fitment information) as a courtesy only. This information is provided by product manufacturers and is assumed to be accurate at the time of publishing. Though Trident Trucks may periodically audit and update some product information based upon manufacturer's published data revisions, Trident Trucks does not guarantee the accuracy of any product data. Trident Trucks reserves the right to update product data as necessary and without notice, and will not be held responsible for misprints, or changes/variations made by vehicle manufacturers. Customers should consult the product manufacturer's website for the most up-to-date product data.
 
Markdown & Open Box Items
Markdown and Open Box items are offered at a discount as they have either been overstocked, slightly damaged, and/or returned from a previous customer. Items are sold "as-is." Trident Trucks will indicate any damage found during the inspection process. Please note that this does not guarantee that all defects have been identified. Sales for all items in this category are final. No refunds, exchanges, or replacements are permitted. Some manufacturers may continue to warranty such items; however, the purchaser accepts that some manufacturers may not extend warranties to items in this category. Please refer to the individual product manufacturer's warranty page for details.

F.A.Q.
How do I request a return?
Use the Contact page, ensuring to include your order number, contact information, items for return, and reason for return. One of our team members will contact you with return shipping details and instructions. Additional information and documentation may be required.
Note: Some items must be returned directly to the manufacturer. Please do not ship items to Trident Trucks prior to return authorization and return instructions.

How do I request a replacement for a missing or damaged part?
Upon receipt, please inspect all orders for completion, accuracy, and damage. If packaging appears to be damaged, ensure to photograph the damage, as this may be required for a shipping carrier claim.
Use the Contact page, ensuring to include your order number, contact information, and description of the incorrect or damaged part(s). One of our team members will contact you to correct the issue.

What product warranties doesTrident Trucks offer?
Product warranties are solely offered by product manufacturers. Please refer to the product manufacturer's warranty statement. In the event of a warranty claim,Trident Trucks is available to assist with the manufacturer's required documentation. Please use the Contact page if assistance is required.
Estimated manufacturer order processing times for in-stock items.
 
 Manufacturer Estimated Lead Time
BDS Suspension 1 Week
Rough Country 1-2 Days
Zone Offroad 1-2 Days