Zone Offroad 5" Coil Spring Lift Kit (2010-2013 RAM 2500/3500 4WD) (ZOND16 / ZOND18) Zone Offroad 5" Coil Spring Lift Kit (2010-2013 RAM 2500/3500 4WD) (ZOND16 / ZOND18) Zone Offroad Go big and go anywhere with this 5" Lift Kit for your truck that gives you clearance for huge tires up to 36". This kit has everything you need to raise and level your 4WD 2010 - 2013 Dodge / Ram 2500 / 3500 Truck. If you're going to do it, do it right. **READ IMPORTANT NOTES AND FITMENT SECTIONS BELOW PRIOR TO MAKING PURCHASE** QUICK SPECS Front Lift Height 5" Rear Lift Height 3" Front Lift Method Coil Springs Rear Lift Method Cast Blocks Lift Type Lift Kit Wheel Size 17 x 9 Back Spacing 5" Max Tire Size 35 x 12.5 Wheel Size 2 18 x 9 Back Spacing 2 5" Max Tire Size 2 35 x 12.5 Wheel Size 3 20 x 9 Back Spacing 3 5" Max Tire Size 3 35 x 12.5 Finish Powdercoat Metal Cutting Required No Accommodates Factory Wheels See Notes Welding Required No FEATURES 100% bolt-on design for easy installation. Bump stop extensions properly limit up-travel, protecting your vehicle. Heavy-duty upper and lower control arms improve strength and articulation while correcting caster. Heavy-duty front track bar bracket correctly positions front axle under vehicle. Steering components included to ensure smooth post-installation operation of steering system and factory-consistent vehicle handling characteristics. IN THE BOX All Necessary Mounting / Installation Hardware Bump Stop Extensions Coil Springs Control Arms Dropped Pitman Arm Rear Lift Block & U-Bolt Kit Sway Bar Relocation Brackets Track Bar Relocation Bracket IMPORTANT NOTES Check Rear Axle Diameter: This truck was produced using rear axles of differing diameters; measure the diameter of your rear axle to ensure proper kit selection in configuration. Factory wheels fit when paired with factory / original equipment tire size. Fitment: This kit is not designed for dually models, but may me easily adapted to accommodate your truck. Please contact customer support and they will help you find a solution. Gas Engine? Gas models may sit slightly taller than the advertised lift height due to lighter weight of engine. Lift Block Selection: These trucks are typically between 1" and 3" tail high from the factory. Please measure your trucks factory front-to-back ride height and order the rear lift height to achieve the desired stance. If closer to 1" tail high from the factory order the 5" rear coils for a more level stance. If closer to 3" tail high from the factory order the 3" rear coils for a more level stance. This truck was produced with different rear axles. Be sure to measure the diameter of your rear axle before ordering. Two-piece rear drive shaft? Add a carrier bearing drop kit to reduce post-lift driveline angles and avoid / eliminate driveshaft vibration. INSTALLATION Instructions Click Here for Installation Guide Specifications Install Time Hours 6 hrs Difficulty Level 2 out of 5 (1: Easiest 5: Most Difficult)   FITMENT 2010 Dodge Ram 2500 4WD 2010 Dodge Ram 3500 4WD 2011 Ram 2500 4WD 2011 Ram 3500 4WD 2012 Ram 2500 4WD 2012 Ram 3500 4WD 2013 Ram 2500 4WD

Zone Offroad 5" Coil Spring Lift Kit (2010-2013 RAM 2500/3500 4WD) (ZOND16 / ZOND18)

Code: ZOND16
$869.94
In Stock
Add to Wishlist Add to Compare
  • SEE DISCOUNT AT CHECKOUT PAGE

  • FREE SHIPPING ON ALL ORDERS

  • 30 DAY RETURNS (SEE ORDER POLICES)

Go big and go anywhere with this 5" Lift Kit for your truck that gives you clearance for huge tires up to 36". This kit has everything you need to raise and level your 4WD 2010 - 2013 Dodge / Ram 2500 / 3500 Truck. If you're going to do it, do it right.

**READ IMPORTANT NOTES AND FITMENT SECTIONS BELOW PRIOR TO MAKING PURCHASE**


QUICK SPECS

Front Lift Height 5"
Rear Lift Height 3"
Front Lift Method Coil Springs
Rear Lift Method Cast Blocks
Lift Type Lift Kit
Wheel Size 17 x 9
Back Spacing 5"
Max Tire Size 35 x 12.5
Wheel Size 2 18 x 9
Back Spacing 2 5"
Max Tire Size 2 35 x 12.5
Wheel Size 3 20 x 9
Back Spacing 3 5"
Max Tire Size 3 35 x 12.5
Finish Powdercoat
Metal Cutting Required No
Accommodates Factory Wheels See Notes
Welding Required No

FEATURES

  • 100% bolt-on design for easy installation.
  • Bump stop extensions properly limit up-travel, protecting your vehicle.
  • Heavy-duty upper and lower control arms improve strength and articulation while correcting caster.
  • Heavy-duty front track bar bracket correctly positions front axle under vehicle.
  • Steering components included to ensure smooth post-installation operation of steering system and factory-consistent vehicle handling characteristics.

IN THE BOX

  • All Necessary Mounting / Installation Hardware
  • Bump Stop Extensions
  • Coil Springs
  • Control Arms
  • Dropped Pitman Arm
  • Rear Lift Block & U-Bolt Kit
  • Sway Bar Relocation Brackets
  • Track Bar Relocation Bracket

IMPORTANT NOTES

  • Check Rear Axle Diameter: This truck was produced using rear axles of differing diameters; measure the diameter of your rear axle to ensure proper kit selection in configuration.
  • Factory wheels fit when paired with factory / original equipment tire size.
  • Fitment: This kit is not designed for dually models, but may me easily adapted to accommodate your truck. Please contact customer support and they will help you find a solution.
  • Gas Engine? Gas models may sit slightly taller than the advertised lift height due to lighter weight of engine.
  • Lift Block Selection: These trucks are typically between 1" and 3" tail high from the factory. Please measure your trucks factory front-to-back ride height and order the rear lift height to achieve the desired stance. If closer to 1" tail high from the factory order the 5" rear coils for a more level stance. If closer to 3" tail high from the factory order the 3" rear coils for a more level stance.
  • This truck was produced with different rear axles. Be sure to measure the diameter of your rear axle before ordering.
  • Two-piece rear drive shaft? Add a carrier bearing drop kit to reduce post-lift driveline angles and avoid / eliminate driveshaft vibration.

INSTALLATION

Instructions

Click Here for Installation Guide

Specifications

Install Time Hours 6 hrs
Difficulty Level 2 out of 5

(1: Easiest 5: Most Difficult)

 

FITMENT

  • 2010 Dodge Ram 2500 4WD
  • 2010 Dodge Ram 3500 4WD
  • 2011 Ram 2500 4WD
  • 2011 Ram 3500 4WD
  • 2012 Ram 2500 4WD
  • 2012 Ram 3500 4WD
  • 2013 Ram 2500 4WD

Go big and go anywhere with this 5" Lift Kit for your truck that gives you clearance for huge tires up to 36". This kit has everything you need to raise and level your 4WD 2010 - 2013 Dodge / Ram 2500 / 3500 Truck. If you're going to do it, do it right.

**READ IMPORTANT NOTES AND FITMENT SECTIONS BELOW PRIOR TO MAKING PURCHASE**


QUICK SPECS

Front Lift Height 5"
Rear Lift Height 3"
Front Lift Method Coil Springs
Rear Lift Method Cast Blocks
Lift Type Lift Kit
Wheel Size 17 x 9
Back Spacing 5"
Max Tire Size 35 x 12.5
Wheel Size 2 18 x 9
Back Spacing 2 5"
Max Tire Size 2 35 x 12.5
Wheel Size 3 20 x 9
Back Spacing 3 5"
Max Tire Size 3 35 x 12.5
Finish Powdercoat
Metal Cutting Required No
Accommodates Factory Wheels See Notes
Welding Required No

FEATURES

  • 100% bolt-on design for easy installation.
  • Bump stop extensions properly limit up-travel, protecting your vehicle.
  • Heavy-duty upper and lower control arms improve strength and articulation while correcting caster.
  • Heavy-duty front track bar bracket correctly positions front axle under vehicle.
  • Steering components included to ensure smooth post-installation operation of steering system and factory-consistent vehicle handling characteristics.

IN THE BOX

  • All Necessary Mounting / Installation Hardware
  • Bump Stop Extensions
  • Coil Springs
  • Control Arms
  • Dropped Pitman Arm
  • Rear Lift Block & U-Bolt Kit
  • Sway Bar Relocation Brackets
  • Track Bar Relocation Bracket

IMPORTANT NOTES

  • Check Rear Axle Diameter: This truck was produced using rear axles of differing diameters; measure the diameter of your rear axle to ensure proper kit selection in configuration.
  • Factory wheels fit when paired with factory / original equipment tire size.
  • Fitment: This kit is not designed for dually models, but may me easily adapted to accommodate your truck. Please contact customer support and they will help you find a solution.
  • Gas Engine? Gas models may sit slightly taller than the advertised lift height due to lighter weight of engine.
  • Lift Block Selection: These trucks are typically between 1" and 3" tail high from the factory. Please measure your trucks factory front-to-back ride height and order the rear lift height to achieve the desired stance. If closer to 1" tail high from the factory order the 5" rear coils for a more level stance. If closer to 3" tail high from the factory order the 3" rear coils for a more level stance.
  • This truck was produced with different rear axles. Be sure to measure the diameter of your rear axle before ordering.
  • Two-piece rear drive shaft? Add a carrier bearing drop kit to reduce post-lift driveline angles and avoid / eliminate driveshaft vibration.

INSTALLATION

Instructions

Click Here for Installation Guide

Specifications

Install Time Hours 6 hrs
Difficulty Level 2 out of 5

(1: Easiest 5: Most Difficult)

 

FITMENT

  • 2010 Dodge Ram 2500 4WD
  • 2010 Dodge Ram 3500 4WD
  • 2011 Ram 2500 4WD
  • 2011 Ram 3500 4WD
  • 2012 Ram 2500 4WD
  • 2012 Ram 3500 4WD
  • 2013 Ram 2500 4WD
IMPORTANT COVID-19 NOTE: 
Our warehouses are open and continuing to ship orders. However, please note that nearly all automotive parts manufacturers, distribution centers, and logistics centers face backorders and delays in order fulfillment.
 
If an item is unexpectedly out of stock or delayed,  Trident Trucks will make an effort to notify the customer, provide order status updates, and expedite the fulfillment process. If you have any questions pertaining to your order status, please use the Contact link above. We thank you for your patience and understanding.
 
Product Availability

See the Lead Times tab for average order fulfillment times by manufacturer. Note that some items ship directly from the manufacturer. For these items, the manufacturer may not provide real-time inventory data to Trident Trucks and backorders are possible. If an item is unavailable, Trident Trucks will contact the buyer with an estimated in-stock and shipping date. Trident Trucks may issue a full refund in the event of a backordered item.

Shipping

Trident Trucks provides shipping within the continental United States only. For orders outside of this area, please use the Contact page prior to placing your order. Items shipped by ground or LTL generally arrive within 1-5 days from date of shipment. Trident Trucks is not responsible for carrier shipping delays.

Returns & Refunds

Items in their original condition may be returned within 30 days from the date of purchase for a full refund. Items may NOT be returned once packaging has been opened or the item has been installed, otherwise used, or damaged. The buyer is responsible for all return shipping charges. Returns and refunds may be requested through the Contact page.

Note: Do NOT ship items back until you have received a return authorization, as items may be returned to a facility other than their point of origin. Refunds will generally be processed within 48 business hours of receipt at our warehouse in order to allow for inspection and processing.

Product Data
Trident Trucks provides product data (including but not limited to item descriptions, important notes, and fitment information) as a courtesy only. This information is provided by product manufacturers and is assumed to be accurate at the time of publishing. Though Trident Trucks may periodically audit and update some product information based upon manufacturer's published data revisions, Trident Trucks does not guarantee the accuracy of any product data. Trident Trucks reserves the right to update product data as necessary and without notice, and will not be held responsible for misprints, or changes/variations made by vehicle manufacturers. Customers should consult the product manufacturer's website for the most up-to-date product data.
 
Markdown & Open Box Items
Markdown and Open Box items are offered at a discount as they have either been overstocked, slightly damaged, and/or returned from a previous customer. Items are sold "as-is." Trident Trucks will indicate any damage found during the inspection process. Please note that this does not guarantee that all defects have been identified. Sales for all items in this category are final. No refunds, exchanges, or replacements are permitted. Some manufacturers may continue to warranty such items; however, the purchaser accepts that some manufacturers may not extend warranties to items in this category. Please refer to the individual product manufacturer's warranty page for details.

F.A.Q.
How do I request a return?
Use the Contact page, ensuring to include your order number, contact information, items for return, and reason for return. One of our team members will contact you with return shipping details and instructions. Additional information and documentation may be required.
Note: Some items must be returned directly to the manufacturer. Please do not ship items to Trident Trucks prior to return authorization and return instructions.

How do I request a replacement for a missing or damaged part?
Upon receipt, please inspect all orders for completion, accuracy, and damage. If packaging appears to be damaged, ensure to photograph the damage, as this may be required for a shipping carrier claim.
Use the Contact page, ensuring to include your order number, contact information, and description of the incorrect or damaged part(s). One of our team members will contact you to correct the issue.

What product warranties doesTrident Trucks offer?
Product warranties are solely offered by product manufacturers. Please refer to the product manufacturer's warranty statement. In the event of a warranty claim,Trident Trucks is available to assist with the manufacturer's required documentation. Please use the Contact page if assistance is required.
Estimated manufacturer order processing times for in-stock items.
 
 Manufacturer Estimated Lead Time
BDS Suspension 1 Week
Rough Country 1-2 Days
Zone Offroad 1-2 Days