Zone Offroad 5" Suspension Lift Kit (2007-2015 Toyota Tundra) (ZONT1) Zone Offroad 5" Suspension Lift Kit (2007-2015 Toyota Tundra) (ZONT1) Zone Offroad The Tundra has some serious power, take advantage of it with this 5" Lift Kit that makes your truck an off road machine. Iron knuckles and heavy-duty, boxed crossmembers integrate with differential mounts to lock everything together. Fits 2007 - 2015 Toyota Tundra. **READ IMPORTANT NOTES AND FITMENT SECTIONS BELOW PRIOR TO MAKING PURCHASE** QUICK SPECS Front Lift Height 5" Rear Lift Height 3" Front Lift Method Knuckle & Drop Cross-Member Rear Lift Method Cast Blocks Lift Type Lift Kit Wheel Size 18 x 9 Back Spacing 5.5" Max Tire Size 35 x 12.5 Wheel Size 2 20 x 9 Back Spacing 2 6.25" Max Tire Size 2 35 x 12.5 Wheel Size 3 22 x 9 Back Spacing 3 6.25" Max Tire Size 3 35 x 12.5 Is Adjustable No Finish Powdercoat Metal Cutting Required No Accommodates Factory Wheels No Welding Required No FEATURES High strength crossmembers to correct lower control arm positioning Ductile iron steering knuckles to corect steering geometry and maintain ESC system compatibility Lower strut extensions to provide lift and install easily Weld-in chassis plates add strength and rigidity Rear lift blocks and u-bolts to lift and level the stance Sway bar, brake line, and bump stop relocation brackets to correct operating angles IN THE BOX All Necessary Mounting / Installation Hardware Crossmembers Lower Strut Extensions Rear Lift Block & U-Bolt Kit Steering Knuckles Tie Rod End(s) IMPORTANT NOTES Will NOT work on 2015 TRD Pro Models. Will work with Bilstein (yellow) factory front struts on 2014-2015 models. Driveline: RWD models may require driveline modification. Two-piece rear drive shaft? Add a carrier bearing drop kit to reduce post-lift driveline angles and avoid / eliminate driveshaft vibration. Wheels / Tires: Factory 18" wheels cannot be reinstalled with this kit due to steering interference. Factory 20" wheels with a maximum 6.25" backspacing can be used. Follow recommended wheel/tire specifications to ensure proper fitment and minimize the need for trimming. INSTALLATION Instructions Click Here for Installation Guide Specifications Install Time Hours 8 hrs Difficulty Level 3 out of 5 (1: Easiest 5: Most Difficult)   FITMENT 2007 Toyota Tundra 2008 Toyota Tundra 2009 Toyota Tundra 2010 Toyota Tundra 2011 Toyota Tundra 2012 Toyota Tundra 2013 Toyota Tundra 2014 Toyota Tundra 2015 Toyota Tundra

Zone Offroad 5" Suspension Lift Kit (2007-2015 Toyota Tundra) (ZONT1)

Code: ZONT1
$1,382.48
In Stock
Add to Wishlist Add to Compare
  • SEE DISCOUNT AT CHECKOUT PAGE

  • FREE SHIPPING ON ALL ORDERS

  • 30 DAY RETURNS (SEE ORDER POLICES)

The Tundra has some serious power, take advantage of it with this 5" Lift Kit that makes your truck an off road machine. Iron knuckles and heavy-duty, boxed crossmembers integrate with differential mounts to lock everything together. Fits 2007 - 2015 Toyota Tundra.

**READ IMPORTANT NOTES AND FITMENT SECTIONS BELOW PRIOR TO MAKING PURCHASE**


QUICK SPECS

Front Lift Height 5"
Rear Lift Height 3"
Front Lift Method Knuckle & Drop Cross-Member
Rear Lift Method Cast Blocks
Lift Type Lift Kit
Wheel Size 18 x 9
Back Spacing 5.5"
Max Tire Size 35 x 12.5
Wheel Size 2 20 x 9
Back Spacing 2 6.25"
Max Tire Size 2 35 x 12.5
Wheel Size 3 22 x 9
Back Spacing 3 6.25"
Max Tire Size 3 35 x 12.5
Is Adjustable No
Finish Powdercoat
Metal Cutting Required No
Accommodates Factory Wheels No
Welding Required No

FEATURES

  • High strength crossmembers to correct lower control arm positioning
  • Ductile iron steering knuckles to corect steering geometry and maintain ESC system compatibility
  • Lower strut extensions to provide lift and install easily
  • Weld-in chassis plates add strength and rigidity
  • Rear lift blocks and u-bolts to lift and level the stance
  • Sway bar, brake line, and bump stop relocation brackets to correct operating angles

IN THE BOX

  • All Necessary Mounting / Installation Hardware
  • Crossmembers
  • Lower Strut Extensions
  • Rear Lift Block & U-Bolt Kit
  • Steering Knuckles
  • Tie Rod End(s)

IMPORTANT NOTES

  • Will NOT work on 2015 TRD Pro Models.
  • Will work with Bilstein (yellow) factory front struts on 2014-2015 models.
  • Driveline: RWD models may require driveline modification.
  • Two-piece rear drive shaft? Add a carrier bearing drop kit to reduce post-lift driveline angles and avoid / eliminate driveshaft vibration.
  • Wheels / Tires: Factory 18" wheels cannot be reinstalled with this kit due to steering interference. Factory 20" wheels with a maximum 6.25" backspacing can be used. Follow recommended wheel/tire specifications to ensure proper fitment and minimize the need for trimming.

INSTALLATION

Instructions

Click Here for Installation Guide

Specifications

Install Time Hours 8 hrs
Difficulty Level 3 out of 5

(1: Easiest 5: Most Difficult)

 

FITMENT

  • 2007 Toyota Tundra
  • 2008 Toyota Tundra
  • 2009 Toyota Tundra
  • 2010 Toyota Tundra
  • 2011 Toyota Tundra
  • 2012 Toyota Tundra
  • 2013 Toyota Tundra
  • 2014 Toyota Tundra
  • 2015 Toyota Tundra

The Tundra has some serious power, take advantage of it with this 5" Lift Kit that makes your truck an off road machine. Iron knuckles and heavy-duty, boxed crossmembers integrate with differential mounts to lock everything together. Fits 2007 - 2015 Toyota Tundra.

**READ IMPORTANT NOTES AND FITMENT SECTIONS BELOW PRIOR TO MAKING PURCHASE**


QUICK SPECS

Front Lift Height 5"
Rear Lift Height 3"
Front Lift Method Knuckle & Drop Cross-Member
Rear Lift Method Cast Blocks
Lift Type Lift Kit
Wheel Size 18 x 9
Back Spacing 5.5"
Max Tire Size 35 x 12.5
Wheel Size 2 20 x 9
Back Spacing 2 6.25"
Max Tire Size 2 35 x 12.5
Wheel Size 3 22 x 9
Back Spacing 3 6.25"
Max Tire Size 3 35 x 12.5
Is Adjustable No
Finish Powdercoat
Metal Cutting Required No
Accommodates Factory Wheels No
Welding Required No

FEATURES

  • High strength crossmembers to correct lower control arm positioning
  • Ductile iron steering knuckles to corect steering geometry and maintain ESC system compatibility
  • Lower strut extensions to provide lift and install easily
  • Weld-in chassis plates add strength and rigidity
  • Rear lift blocks and u-bolts to lift and level the stance
  • Sway bar, brake line, and bump stop relocation brackets to correct operating angles

IN THE BOX

  • All Necessary Mounting / Installation Hardware
  • Crossmembers
  • Lower Strut Extensions
  • Rear Lift Block & U-Bolt Kit
  • Steering Knuckles
  • Tie Rod End(s)

IMPORTANT NOTES

  • Will NOT work on 2015 TRD Pro Models.
  • Will work with Bilstein (yellow) factory front struts on 2014-2015 models.
  • Driveline: RWD models may require driveline modification.
  • Two-piece rear drive shaft? Add a carrier bearing drop kit to reduce post-lift driveline angles and avoid / eliminate driveshaft vibration.
  • Wheels / Tires: Factory 18" wheels cannot be reinstalled with this kit due to steering interference. Factory 20" wheels with a maximum 6.25" backspacing can be used. Follow recommended wheel/tire specifications to ensure proper fitment and minimize the need for trimming.

INSTALLATION

Instructions

Click Here for Installation Guide

Specifications

Install Time Hours 8 hrs
Difficulty Level 3 out of 5

(1: Easiest 5: Most Difficult)

 

FITMENT

  • 2007 Toyota Tundra
  • 2008 Toyota Tundra
  • 2009 Toyota Tundra
  • 2010 Toyota Tundra
  • 2011 Toyota Tundra
  • 2012 Toyota Tundra
  • 2013 Toyota Tundra
  • 2014 Toyota Tundra
  • 2015 Toyota Tundra
IMPORTANT COVID-19 NOTE: 
Our warehouses are open and continuing to ship orders. However, please note that nearly all automotive parts manufacturers, distribution centers, and logistics centers face backorders and delays in order fulfillment.
 
If an item is unexpectedly out of stock or delayed,  Trident Trucks will make an effort to notify the customer, provide order status updates, and expedite the fulfillment process. If you have any questions pertaining to your order status, please use the Contact link above. We thank you for your patience and understanding.
 
Product Availability

See the Lead Times tab for average order fulfillment times by manufacturer. Note that some items ship directly from the manufacturer. For these items, the manufacturer may not provide real-time inventory data to Trident Trucks and backorders are possible. If an item is unavailable, Trident Trucks will contact the buyer with an estimated in-stock and shipping date. Trident Trucks may issue a full refund in the event of a backordered item.

Shipping

Trident Trucks provides shipping within the continental United States only. For orders outside of this area, please use the Contact page prior to placing your order. Items shipped by ground or LTL generally arrive within 1-5 days from date of shipment. Trident Trucks is not responsible for carrier shipping delays.

Returns & Refunds

Items in their original condition may be returned within 30 days from the date of purchase for a full refund. Items may NOT be returned once packaging has been opened or the item has been installed, otherwise used, or damaged. The buyer is responsible for all return shipping charges. Returns and refunds may be requested through the Contact page.

Note: Do NOT ship items back until you have received a return authorization, as items may be returned to a facility other than their point of origin. Refunds will generally be processed within 48 business hours of receipt at our warehouse in order to allow for inspection and processing.

Product Data
Trident Trucks provides product data (including but not limited to item descriptions, important notes, and fitment information) as a courtesy only. This information is provided by product manufacturers and is assumed to be accurate at the time of publishing. Though Trident Trucks may periodically audit and update some product information based upon manufacturer's published data revisions, Trident Trucks does not guarantee the accuracy of any product data. Trident Trucks reserves the right to update product data as necessary and without notice, and will not be held responsible for misprints, or changes/variations made by vehicle manufacturers. Customers should consult the product manufacturer's website for the most up-to-date product data.
 
Markdown & Open Box Items
Markdown and Open Box items are offered at a discount as they have either been overstocked, slightly damaged, and/or returned from a previous customer. Items are sold "as-is." Trident Trucks will indicate any damage found during the inspection process. Please note that this does not guarantee that all defects have been identified. Sales for all items in this category are final. No refunds, exchanges, or replacements are permitted. Some manufacturers may continue to warranty such items; however, the purchaser accepts that some manufacturers may not extend warranties to items in this category. Please refer to the individual product manufacturer's warranty page for details.

F.A.Q.
How do I request a return?
Use the Contact page, ensuring to include your order number, contact information, items for return, and reason for return. One of our team members will contact you with return shipping details and instructions. Additional information and documentation may be required.
Note: Some items must be returned directly to the manufacturer. Please do not ship items to Trident Trucks prior to return authorization and return instructions.

How do I request a replacement for a missing or damaged part?
Upon receipt, please inspect all orders for completion, accuracy, and damage. If packaging appears to be damaged, ensure to photograph the damage, as this may be required for a shipping carrier claim.
Use the Contact page, ensuring to include your order number, contact information, and description of the incorrect or damaged part(s). One of our team members will contact you to correct the issue.

What product warranties doesTrident Trucks offer?
Product warranties are solely offered by product manufacturers. Please refer to the product manufacturer's warranty statement. In the event of a warranty claim,Trident Trucks is available to assist with the manufacturer's required documentation. Please use the Contact page if assistance is required.
Estimated manufacturer order processing times for in-stock items.
 
 Manufacturer Estimated Lead Time
BDS Suspension 1 Week
Rough Country 1-2 Days
Zone Offroad 1-2 Days