Zone Offroad 3" Adventure Series Lift Kit (2020-2021 Chevy/GMC 2500HD/3500HD Trucks) (ZONC48 / ZONC49) Zone Offroad 3" Adventure Series Lift Kit (2020-2021 Chevy/GMC 2500HD/3500HD Trucks) (ZONC48 / ZONC49) Zone Offroad Take your new HD to the next level with the 3" Adventure Series Lift Kit from Zone Offroad. Engineered for easy bolt on fitment and improved travel, these 3? Adventure Series Lift Kits bridge that gap between an entry level leveling kit and full IFS lift system offering next level performance without the cost and extensive installation. The heart of this new system is a pair of heavy duty replacement upper control arms (UCAs) designed to improve range of motion for more suspension travel when wheeling in rough terrain. These new control arms dwarf the factory units and are built from high strnegth steel, boxed and fully welded with CNC-machined bushing and ball joint cups repositioned to operate in the neutral position at 3? of lift. They use OE durometer rubber bushings and greaseable OE-style heavy duty ball joints for quiet, reliable operation and superior corrosion resistance to uniball style control arms. Along with the arms, a pair of reindexed cast steel torsion bar keys are supplied up front to lift vehicle. Zone Offroad includes a small differential relocation kit (4WD models only) to correct CV axle operating angles without effecting ground clearance. The sway bar operating angle is corrected with the use of a pair of relocation brackets allowing for full droop of the suspension and proper clearance. In the rear a 2? block and u-bolt kit is used to create a level to slightly tail high stance. Rounding out the kit are a set of Nitro gas or FOX adventure series IFP gas shocks at all 4 corners for a smooth ride and impressive performance across any terrain. Take your late model GM 2500HD to the next level with Zone Offroad! **READ IMPORTANT NOTES AND FITMENT SECTIONS BELOW PRIOR TO MAKING PURCHASE** QUICK SPECS Front Lift Height 3" Rear Lift Height 2" Material Steel Front Lift Method Torsion Key Rear Lift Method Fabricated Blocks Lift Type Lift Kit Wheel Size 20 x 9 Back Spacing 5-5.75" Max Tire Size 35 x 12.5 Wheel Size 2 20 x 9 Back Spacing 2 5-6.18" Max Tire Size 2 295 / 60 Wheel Size 3 20 x 9 Back Spacing 3 5-6.18" Max Tire Size 3 285 x 65 Finish Powdercoat Accommodates Factory Wheels See Notes FEATURES High strength UCAs are boxed and fully welded. They are specially designed with an indexed ball joint cup to correct ball joint operating angle for more suspension travel. Cast construction indexed torsion bar keys to provide additional ride height while maximizing ground clearance. Front differential relocation brackets to correct CV axle operating angle. Sway bar relocation brackets to maintain clearance and proper operating angle. 2" rear lift blocks and heavy duty u-bolts to level the stance. Nitro series gas or FOX 2.0 adventure series IFP gas shocks to improve performance. Maintains ride and handling characteristics with clearance for 35" tires. Allows for improve offroad performance with more droop travel. IN THE BOX Rear Lift Block & U-Bolt Kit Torsion Bar Keys Upper Control Arms Sway Bar Relocation Differential Relocation IMPORTANT NOTES Stock wheels with stock tires can be installed, however clearance are very tight to the upper control arms. Proper torsion bar key unloading tool required, (Kent Moore #CH48809 or equivalent) Will work on gas or diesel models. Will work on standard and AT4 models. NOT recommended for DRW applications (may require custom u-bolts) INSTALLATION Instructions Click Here for Installation Guide Specifications Install Time Hours 3-4 hrs Difficulty Level 3 out of 5 (1: Easiest 5: Most Difficult) Required Tools Torsion Bar Unloading Tool FITMENT 2020 Chevrolet Silverado 2500 HD 2020 Chevrolet Silverado 3500 HD 2020 GMC Sierra 2500 HD 2020 GMC Sierra 2500 HD Denali 2020 GMC Sierra 3500 HD 2020 GMC Sierra 3500 HD Denali 2021 Chevrolet Silverado 2500 HD 2021 Chevrolet Silverado 3500 HD 2021 GMC Sierra 2500 HD 2021 GMC Sierra 2500 HD Denali 2021 GMC Sierra 3500 HD 2021 GMC Sierra 3500 HD Denali

Zone Offroad 3" Adventure Series Lift Kit (2020-2021 Chevy/GMC 2500HD/3500HD Trucks) (ZONC48 / ZONC49)

Code: ZONC48
$897.49
In Stock
  • FREE SHIPPING

  • 30 DAY RETURNS

  • LIVE SUPPORT

Take your new HD to the next level with the 3" Adventure Series Lift Kit from Zone Offroad. Engineered for easy bolt on fitment and improved travel, these 3? Adventure Series Lift Kits bridge that gap between an entry level leveling kit and full IFS lift system offering next level performance without the cost and extensive installation. The heart of this new system is a pair of heavy duty replacement upper control arms (UCAs) designed to improve range of motion for more suspension travel when wheeling in rough terrain. These new control arms dwarf the factory units and are built from high strnegth steel, boxed and fully welded with CNC-machined bushing and ball joint cups repositioned to operate in the neutral position at 3? of lift. They use OE durometer rubber bushings and greaseable OE-style heavy duty ball joints for quiet, reliable operation and superior corrosion resistance to uniball style control arms. Along with the arms, a pair of reindexed cast steel torsion bar keys are supplied up front to lift vehicle. Zone Offroad includes a small differential relocation kit (4WD models only) to correct CV axle operating angles without effecting ground clearance. The sway bar operating angle is corrected with the use of a pair of relocation brackets allowing for full droop of the suspension and proper clearance. In the rear a 2? block and u-bolt kit is used to create a level to slightly tail high stance. Rounding out the kit are a set of Nitro gas or FOX adventure series IFP gas shocks at all 4 corners for a smooth ride and impressive performance across any terrain. Take your late model GM 2500HD to the next level with Zone Offroad!

**READ IMPORTANT NOTES AND FITMENT SECTIONS BELOW PRIOR TO MAKING PURCHASE**


QUICK SPECS

Front Lift Height 3"
Rear Lift Height 2"
Material Steel
Front Lift Method Torsion Key
Rear Lift Method Fabricated Blocks
Lift Type Lift Kit
Wheel Size 20 x 9
Back Spacing 5-5.75"
Max Tire Size 35 x 12.5
Wheel Size 2 20 x 9
Back Spacing 2 5-6.18"
Max Tire Size 2 295 / 60
Wheel Size 3 20 x 9
Back Spacing 3 5-6.18"
Max Tire Size 3 285 x 65
Finish Powdercoat
Accommodates Factory Wheels See Notes

FEATURES

  • High strength UCAs are boxed and fully welded. They are specially designed with an indexed ball joint cup to correct ball joint operating angle for more suspension travel.
  • Cast construction indexed torsion bar keys to provide additional ride height while maximizing ground clearance.
  • Front differential relocation brackets to correct CV axle operating angle.
  • Sway bar relocation brackets to maintain clearance and proper operating angle.
  • 2" rear lift blocks and heavy duty u-bolts to level the stance.
  • Nitro series gas or FOX 2.0 adventure series IFP gas shocks to improve performance.
  • Maintains ride and handling characteristics with clearance for 35" tires.
  • Allows for improve offroad performance with more droop travel.

IN THE BOX

  • Rear Lift Block & U-Bolt Kit
  • Torsion Bar Keys
  • Upper Control Arms
  • Sway Bar Relocation
  • Differential Relocation

IMPORTANT NOTES

  • Stock wheels with stock tires can be installed, however clearance are very tight to the upper control arms.
  • Proper torsion bar key unloading tool required, (Kent Moore #CH48809 or equivalent)
  • Will work on gas or diesel models.
  • Will work on standard and AT4 models.
  • NOT recommended for DRW applications (may require custom u-bolts)

INSTALLATION

Instructions

Click Here for Installation Guide

Specifications

Install Time Hours 3-4 hrs
Difficulty Level 3 out of 5

(1: Easiest 5: Most Difficult)

Required Tools

  • Torsion Bar Unloading Tool

FITMENT

  • 2020 Chevrolet Silverado 2500 HD
  • 2020 Chevrolet Silverado 3500 HD
  • 2020 GMC Sierra 2500 HD
  • 2020 GMC Sierra 2500 HD Denali
  • 2020 GMC Sierra 3500 HD
  • 2020 GMC Sierra 3500 HD Denali
  • 2021 Chevrolet Silverado 2500 HD
  • 2021 Chevrolet Silverado 3500 HD
  • 2021 GMC Sierra 2500 HD
  • 2021 GMC Sierra 2500 HD Denali
  • 2021 GMC Sierra 3500 HD
  • 2021 GMC Sierra 3500 HD Denali

Take your new HD to the next level with the 3" Adventure Series Lift Kit from Zone Offroad. Engineered for easy bolt on fitment and improved travel, these 3? Adventure Series Lift Kits bridge that gap between an entry level leveling kit and full IFS lift system offering next level performance without the cost and extensive installation. The heart of this new system is a pair of heavy duty replacement upper control arms (UCAs) designed to improve range of motion for more suspension travel when wheeling in rough terrain. These new control arms dwarf the factory units and are built from high strnegth steel, boxed and fully welded with CNC-machined bushing and ball joint cups repositioned to operate in the neutral position at 3? of lift. They use OE durometer rubber bushings and greaseable OE-style heavy duty ball joints for quiet, reliable operation and superior corrosion resistance to uniball style control arms. Along with the arms, a pair of reindexed cast steel torsion bar keys are supplied up front to lift vehicle. Zone Offroad includes a small differential relocation kit (4WD models only) to correct CV axle operating angles without effecting ground clearance. The sway bar operating angle is corrected with the use of a pair of relocation brackets allowing for full droop of the suspension and proper clearance. In the rear a 2? block and u-bolt kit is used to create a level to slightly tail high stance. Rounding out the kit are a set of Nitro gas or FOX adventure series IFP gas shocks at all 4 corners for a smooth ride and impressive performance across any terrain. Take your late model GM 2500HD to the next level with Zone Offroad!

**READ IMPORTANT NOTES AND FITMENT SECTIONS BELOW PRIOR TO MAKING PURCHASE**


QUICK SPECS

Front Lift Height 3"
Rear Lift Height 2"
Material Steel
Front Lift Method Torsion Key
Rear Lift Method Fabricated Blocks
Lift Type Lift Kit
Wheel Size 20 x 9
Back Spacing 5-5.75"
Max Tire Size 35 x 12.5
Wheel Size 2 20 x 9
Back Spacing 2 5-6.18"
Max Tire Size 2 295 / 60
Wheel Size 3 20 x 9
Back Spacing 3 5-6.18"
Max Tire Size 3 285 x 65
Finish Powdercoat
Accommodates Factory Wheels See Notes

FEATURES

  • High strength UCAs are boxed and fully welded. They are specially designed with an indexed ball joint cup to correct ball joint operating angle for more suspension travel.
  • Cast construction indexed torsion bar keys to provide additional ride height while maximizing ground clearance.
  • Front differential relocation brackets to correct CV axle operating angle.
  • Sway bar relocation brackets to maintain clearance and proper operating angle.
  • 2" rear lift blocks and heavy duty u-bolts to level the stance.
  • Nitro series gas or FOX 2.0 adventure series IFP gas shocks to improve performance.
  • Maintains ride and handling characteristics with clearance for 35" tires.
  • Allows for improve offroad performance with more droop travel.

IN THE BOX

  • Rear Lift Block & U-Bolt Kit
  • Torsion Bar Keys
  • Upper Control Arms
  • Sway Bar Relocation
  • Differential Relocation

IMPORTANT NOTES

  • Stock wheels with stock tires can be installed, however clearance are very tight to the upper control arms.
  • Proper torsion bar key unloading tool required, (Kent Moore #CH48809 or equivalent)
  • Will work on gas or diesel models.
  • Will work on standard and AT4 models.
  • NOT recommended for DRW applications (may require custom u-bolts)

INSTALLATION

Instructions

Click Here for Installation Guide

Specifications

Install Time Hours 3-4 hrs
Difficulty Level 3 out of 5

(1: Easiest 5: Most Difficult)

Required Tools

  • Torsion Bar Unloading Tool

FITMENT

  • 2020 Chevrolet Silverado 2500 HD
  • 2020 Chevrolet Silverado 3500 HD
  • 2020 GMC Sierra 2500 HD
  • 2020 GMC Sierra 2500 HD Denali
  • 2020 GMC Sierra 3500 HD
  • 2020 GMC Sierra 3500 HD Denali
  • 2021 Chevrolet Silverado 2500 HD
  • 2021 Chevrolet Silverado 3500 HD
  • 2021 GMC Sierra 2500 HD
  • 2021 GMC Sierra 2500 HD Denali
  • 2021 GMC Sierra 3500 HD
  • 2021 GMC Sierra 3500 HD Denali
IMPORTANT COVID-19 NOTE: 
Our warehouses are open and continuing to ship orders. However, please note that nearly all automotive parts manufacturers, distribution centers, and logistics centers face backorders and delays in order fulfillment.
 
If an item is unexpectedly out of stock or delayed,  Trident Trucks will make an effort to notify the customer, provide order status updates, and expedite the fulfillment process. If you have any questions pertaining to your order status, please use the Contact link above. We thank you for your patience and understanding.
 
Product Availability

To check stock levels, use our Live-Chat feature or Contact page. See the Lead Times tab for average order fulfillment times by manufacturer.

Note that some items ship directly from the manufacturer. For these items, the manufacturer may not provide real-time inventory data to Trident Trucks and backorders are possible. If an item is unavailable, Trident Trucks will contact the buyer with an estimated ship date. In the event of excessive manufacturer backorders or delays, Trident Trucks may opt to cancel the order and provide a full refund.

Shipping

Trident Trucks provides shipping within the contiguous 48 states only. For orders outside of this area, please use the Contact page prior to placing your order. Items shipped by ground or LTL generally arrive within 1-5 days from date of shipment. Trident Trucks is not responsible for carrier shipping delays.

Returns & Refunds

Items in their original condition may be returned within 30 days from the date of purchase for a full refund. Items may NOT be returned once packaging has been opened or the item has been installed, otherwise used, or damaged. The buyer is responsible for all return shipping charges. Returns and refunds may be requested through the Contact page.

Note: Do NOT ship items back until you have received a return authorization, as items may be returned to a facility other than their point of origin. Refunds will generally be processed within 48 business hours of receipt at our warehouse in order to allow for inspection and processing.

Product Data
Trident Trucks provides product data (including but not limited to item descriptions, important notes, and fitment information) as a courtesy only. This information is provided by product manufacturers and is assumed to be accurate at the time of publishing. Though Trident Trucks may periodically audit and update some product information based upon manufacturer's published data revisions, Trident Trucks does not guarantee the accuracy of any product data. Trident Trucks reserves the right to update product data as necessary and without notice, and will not be held responsible for misprints, or changes/variations made by vehicle manufacturers. Customers should consult the product manufacturer's website for the most up-to-date product data.
 
Markdown & Open Box Items
Markdown and Open Box items are offered at a discount as they have either been overstocked, slightly damaged, and/or returned from a previous customer. Items are sold "as-is." Trident Trucks will indicate any damage found during the inspection process. Please note that this does not guarantee that all defects have been identified. Sales for all items in this category are final. No refunds, exchanges, or replacements are permitted. Some manufacturers may continue to warranty such items; however, the purchaser accepts that some manufacturers may not extend warranties to items in this category. Please refer to the individual product manufacturer's warranty page for details.

F.A.Q.
How do I request a return?
Use the Contact page, ensuring to include your order number, contact information, items for return, and reason for return. One of our team members will contact you with return shipping details and instructions. Additional information and documentation may be required.
Note: Some items must be returned directly to the manufacturer. Please do not ship items to Trident Trucks prior to return authorization and return instructions.

How do I request a replacement for a missing or damaged part?
Upon receipt, please inspect all orders for completion, accuracy, and damage. If packaging appears to be damaged, ensure to photograph the damage, as this may be required for a shipping carrier claim.
Use the Contact page, ensuring to include your order number, contact information, and description of the incorrect or damaged part(s). One of our team members will contact you to correct the issue.

What product warranties doesTrident Trucks offer?
Product warranties are solely offered by product manufacturers. Please refer to the product manufacturer's warranty statement. In the event of a warranty claim,Trident Trucks is available to assist with the manufacturer's required documentation. Please use the Contact page if assistance is required.
Estimated order processing times for in-stock items.
To check stock levels, use our Live-Chat feature or Contact page.
 
 Manufacturer Estimated Lead Time
BDS Suspension
1-2 Days
Morimoto 1-2 Days
ReadyLIFT Suspensions 1-7 Days
Rough Country 1-2 Days
Zone Offroad 1-2 Days