Zone Offroad 8" Coil Spring Lift Kit (2003-2007 RAM 2500/3500 4WD Diesel) (ZOND25 / ZOND24) Zone Offroad 8" Coil Spring Lift Kit (2003-2007 RAM 2500/3500 4WD Diesel) (ZOND25 / ZOND24) Zone Offroad Step up to our highest lift that will let you clear 38" tires, but will still leave you in control. This coil spring and cast block 8" lift Kit is the easy and affordable way to create the truck you've always wanted. Fits Diesel 4WD 2003 - 2007 Dodge / Ram 2500 / 3500 Trucks. **READ IMPORTANT NOTES AND FITMENT SECTIONS BELOW PRIOR TO MAKING PURCHASE** QUICK SPECS Front Lift Height 8" Rear Lift Height 5" Front Lift Method Coil Springs Rear Lift Method Cast Blocks Lift Type Lift Kit Wheel Size 17 x 9 Back Spacing 5" Max Tire Size 38 x 13.5 Wheel Size 2 18 x 9 Back Spacing 2 5" Max Tire Size 2 38 x 13.5 Wheel Size 3 20 x 9 Back Spacing 3 5" Max Tire Size 3 38 x 13.5 Finish Powdercoat Metal Cutting Required No Accommodates Factory Wheels See Notes Welding Required No FEATURES 100% bolt-on design for easy installation. High-strength control arm relocation brackets correct suspension geometry and add rigidity. IN THE BOX All Necessary Mounting / Installation Hardware Brake Line Brackets Coil Springs Control Arm Relocation Brackets Dropped Pitman Arm Rear Lift Block & U-Bolt Kit Track Bar Relocation Bracket Transfer Case Indexing Ring IMPORTANT NOTES Check Rear Axle Diameter: This truck was produced with different rear axles. Be sure to measure the diameter of your rear axle before ordering. The easiest way to accurately measure the diameter of your rear axle is to measure the inner diameter of your rear-axle U-bolts; to do so, use a tape to measure the distance between the inside edges of the threaded ends of your u-bolts. This kit is NOT designed for dually models, but may me easily adapted to accommodate your truck. Please contact customer support and they will help you find a solution. If your Truck has had the steering gear box changed and the sector shaft diameter measures ~1-1/2”-1-5/8” you will need ZOND8404 also with your kit. Diesels Only! Lift springs are designed for heavier diesel models only. Using lift springs with lighter gas models may cause excessive lift and is NOT recommended. Driveline Notice: Although rare, if you experience front driveline vibration, install the optional transfer case indexing ring. Factory wheels fit when paired with factory / original equipment tire size. Two-piece rear drive shaft? Add a carrier bearing drop kit to reduce post-lift driveline angles and avoid / eliminate driveshaft vibration. Wheels / Tires: Adding larger-than-stock wheels? Add front bumper spacers to your kit for additional clearance as some wheel / tire combos may not fully clear the bumper’s stock location. INSTALLATION Instructions Click Here for Installation Guide Specifications Install Time Hours 7 hrs Difficulty Level 3 out of 5 (1: Easiest 5: Most Difficult)   FITMENT 2003 Dodge Ram 2500 4WD Diesel 2003 Dodge Ram 3500 4WD Diesel 2004 Dodge Ram 2500 4WD Diesel 2004 Dodge Ram 3500 4WD Diesel 2005 Dodge Ram 2500 4WD Diesel 2005 Dodge Ram 3500 4WD Diesel 2006 Dodge Ram 2500 4WD Diesel 2006 Dodge Ram 3500 4WD Diesel 2007 Dodge Ram 2500 4WD Diesel 2007 Dodge Ram 3500 4WD Diesel

Zone Offroad 8" Coil Spring Lift Kit (2003-2007 RAM 2500/3500 4WD Diesel) (ZOND25 / ZOND24)

Code: ZOND24
$1,338.43
In Stock
Add to Wishlist Add to Compare
  • SEE DISCOUNT AT CHECKOUT PAGE

  • FREE SHIPPING ON ALL ORDERS

  • 30 DAY RETURNS (SEE ORDER POLICES)

Step up to our highest lift that will let you clear 38" tires, but will still leave you in control. This coil spring and cast block 8" lift Kit is the easy and affordable way to create the truck you've always wanted. Fits Diesel 4WD 2003 - 2007 Dodge / Ram 2500 / 3500 Trucks.

**READ IMPORTANT NOTES AND FITMENT SECTIONS BELOW PRIOR TO MAKING PURCHASE**


QUICK SPECS

Front Lift Height 8"
Rear Lift Height 5"
Front Lift Method Coil Springs
Rear Lift Method Cast Blocks
Lift Type Lift Kit
Wheel Size 17 x 9
Back Spacing 5"
Max Tire Size 38 x 13.5
Wheel Size 2 18 x 9
Back Spacing 2 5"
Max Tire Size 2 38 x 13.5
Wheel Size 3 20 x 9
Back Spacing 3 5"
Max Tire Size 3 38 x 13.5
Finish Powdercoat
Metal Cutting Required No
Accommodates Factory Wheels See Notes
Welding Required No

FEATURES

  • 100% bolt-on design for easy installation.
  • High-strength control arm relocation brackets correct suspension geometry and add rigidity.

IN THE BOX

  • All Necessary Mounting / Installation Hardware
  • Brake Line Brackets
  • Coil Springs
  • Control Arm Relocation Brackets
  • Dropped Pitman Arm
  • Rear Lift Block & U-Bolt Kit
  • Track Bar Relocation Bracket
  • Transfer Case Indexing Ring

IMPORTANT NOTES

  • Check Rear Axle Diameter: This truck was produced with different rear axles. Be sure to measure the diameter of your rear axle before ordering. The easiest way to accurately measure the diameter of your rear axle is to measure the inner diameter of your rear-axle U-bolts; to do so, use a tape to measure the distance between the inside edges of the threaded ends of your u-bolts.
  • This kit is NOT designed for dually models, but may me easily adapted to accommodate your truck. Please contact customer support and they will help you find a solution.
  • If your Truck has had the steering gear box changed and the sector shaft diameter measures ~1-1/2”-1-5/8” you will need ZOND8404 also with your kit.
  • Diesels Only! Lift springs are designed for heavier diesel models only. Using lift springs with lighter gas models may cause excessive lift and is NOT recommended.
  • Driveline Notice: Although rare, if you experience front driveline vibration, install the optional transfer case indexing ring.
  • Factory wheels fit when paired with factory / original equipment tire size.
  • Two-piece rear drive shaft? Add a carrier bearing drop kit to reduce post-lift driveline angles and avoid / eliminate driveshaft vibration.
  • Wheels / Tires: Adding larger-than-stock wheels? Add front bumper spacers to your kit for additional clearance as some wheel / tire combos may not fully clear the bumper’s stock location.

INSTALLATION

Instructions

Click Here for Installation Guide

Specifications

Install Time Hours 7 hrs
Difficulty Level 3 out of 5

(1: Easiest 5: Most Difficult)

 

FITMENT

  • 2003 Dodge Ram 2500 4WD Diesel
  • 2003 Dodge Ram 3500 4WD Diesel
  • 2004 Dodge Ram 2500 4WD Diesel
  • 2004 Dodge Ram 3500 4WD Diesel
  • 2005 Dodge Ram 2500 4WD Diesel
  • 2005 Dodge Ram 3500 4WD Diesel
  • 2006 Dodge Ram 2500 4WD Diesel
  • 2006 Dodge Ram 3500 4WD Diesel
  • 2007 Dodge Ram 2500 4WD Diesel
  • 2007 Dodge Ram 3500 4WD Diesel

Step up to our highest lift that will let you clear 38" tires, but will still leave you in control. This coil spring and cast block 8" lift Kit is the easy and affordable way to create the truck you've always wanted. Fits Diesel 4WD 2003 - 2007 Dodge / Ram 2500 / 3500 Trucks.

**READ IMPORTANT NOTES AND FITMENT SECTIONS BELOW PRIOR TO MAKING PURCHASE**


QUICK SPECS

Front Lift Height 8"
Rear Lift Height 5"
Front Lift Method Coil Springs
Rear Lift Method Cast Blocks
Lift Type Lift Kit
Wheel Size 17 x 9
Back Spacing 5"
Max Tire Size 38 x 13.5
Wheel Size 2 18 x 9
Back Spacing 2 5"
Max Tire Size 2 38 x 13.5
Wheel Size 3 20 x 9
Back Spacing 3 5"
Max Tire Size 3 38 x 13.5
Finish Powdercoat
Metal Cutting Required No
Accommodates Factory Wheels See Notes
Welding Required No

FEATURES

  • 100% bolt-on design for easy installation.
  • High-strength control arm relocation brackets correct suspension geometry and add rigidity.

IN THE BOX

  • All Necessary Mounting / Installation Hardware
  • Brake Line Brackets
  • Coil Springs
  • Control Arm Relocation Brackets
  • Dropped Pitman Arm
  • Rear Lift Block & U-Bolt Kit
  • Track Bar Relocation Bracket
  • Transfer Case Indexing Ring

IMPORTANT NOTES

  • Check Rear Axle Diameter: This truck was produced with different rear axles. Be sure to measure the diameter of your rear axle before ordering. The easiest way to accurately measure the diameter of your rear axle is to measure the inner diameter of your rear-axle U-bolts; to do so, use a tape to measure the distance between the inside edges of the threaded ends of your u-bolts.
  • This kit is NOT designed for dually models, but may me easily adapted to accommodate your truck. Please contact customer support and they will help you find a solution.
  • If your Truck has had the steering gear box changed and the sector shaft diameter measures ~1-1/2”-1-5/8” you will need ZOND8404 also with your kit.
  • Diesels Only! Lift springs are designed for heavier diesel models only. Using lift springs with lighter gas models may cause excessive lift and is NOT recommended.
  • Driveline Notice: Although rare, if you experience front driveline vibration, install the optional transfer case indexing ring.
  • Factory wheels fit when paired with factory / original equipment tire size.
  • Two-piece rear drive shaft? Add a carrier bearing drop kit to reduce post-lift driveline angles and avoid / eliminate driveshaft vibration.
  • Wheels / Tires: Adding larger-than-stock wheels? Add front bumper spacers to your kit for additional clearance as some wheel / tire combos may not fully clear the bumper’s stock location.

INSTALLATION

Instructions

Click Here for Installation Guide

Specifications

Install Time Hours 7 hrs
Difficulty Level 3 out of 5

(1: Easiest 5: Most Difficult)

 

FITMENT

  • 2003 Dodge Ram 2500 4WD Diesel
  • 2003 Dodge Ram 3500 4WD Diesel
  • 2004 Dodge Ram 2500 4WD Diesel
  • 2004 Dodge Ram 3500 4WD Diesel
  • 2005 Dodge Ram 2500 4WD Diesel
  • 2005 Dodge Ram 3500 4WD Diesel
  • 2006 Dodge Ram 2500 4WD Diesel
  • 2006 Dodge Ram 3500 4WD Diesel
  • 2007 Dodge Ram 2500 4WD Diesel
  • 2007 Dodge Ram 3500 4WD Diesel
IMPORTANT COVID-19 NOTE: 
Our warehouses are open and continuing to ship orders. However, please note that nearly all automotive parts manufacturers, distribution centers, and logistics centers face backorders and delays in order fulfillment.
 
If an item is unexpectedly out of stock or delayed,  Trident Trucks will make an effort to notify the customer, provide order status updates, and expedite the fulfillment process. If you have any questions pertaining to your order status, please use the Contact link above. We thank you for your patience and understanding.
 
Product Availability

See the Lead Times tab for average order fulfillment times by manufacturer. Note that some items ship directly from the manufacturer. For these items, the manufacturer may not provide real-time inventory data to Trident Trucks and backorders are possible. If an item is unavailable, Trident Trucks will contact the buyer with an estimated in-stock and shipping date. Trident Trucks may issue a full refund in the event of a backordered item.

Shipping

Trident Trucks provides shipping within the continental United States only. For orders outside of this area, please use the Contact page prior to placing your order. Items shipped by ground or LTL generally arrive within 1-5 days from date of shipment. Trident Trucks is not responsible for carrier shipping delays.

Returns & Refunds

Items in their original condition may be returned within 30 days from the date of purchase for a full refund. Items may NOT be returned once packaging has been opened or the item has been installed, otherwise used, or damaged. The buyer is responsible for all return shipping charges. Returns and refunds may be requested through the Contact page.

Note: Do NOT ship items back until you have received a return authorization, as items may be returned to a facility other than their point of origin. Refunds will generally be processed within 48 business hours of receipt at our warehouse in order to allow for inspection and processing.

Product Data
Trident Trucks provides product data (including but not limited to item descriptions, important notes, and fitment information) as a courtesy only. This information is provided by product manufacturers and is assumed to be accurate at the time of publishing. Though Trident Trucks may periodically audit and update some product information based upon manufacturer's published data revisions, Trident Trucks does not guarantee the accuracy of any product data. Trident Trucks reserves the right to update product data as necessary and without notice, and will not be held responsible for misprints, or changes/variations made by vehicle manufacturers. Customers should consult the product manufacturer's website for the most up-to-date product data.
 
Markdown & Open Box Items
Markdown and Open Box items are offered at a discount as they have either been overstocked, slightly damaged, and/or returned from a previous customer. Items are sold "as-is." Trident Trucks will indicate any damage found during the inspection process. Please note that this does not guarantee that all defects have been identified. Sales for all items in this category are final. No refunds, exchanges, or replacements are permitted. Some manufacturers may continue to warranty such items; however, the purchaser accepts that some manufacturers may not extend warranties to items in this category. Please refer to the individual product manufacturer's warranty page for details.

F.A.Q.
How do I request a return?
Use the Contact page, ensuring to include your order number, contact information, items for return, and reason for return. One of our team members will contact you with return shipping details and instructions. Additional information and documentation may be required.
Note: Some items must be returned directly to the manufacturer. Please do not ship items to Trident Trucks prior to return authorization and return instructions.

How do I request a replacement for a missing or damaged part?
Upon receipt, please inspect all orders for completion, accuracy, and damage. If packaging appears to be damaged, ensure to photograph the damage, as this may be required for a shipping carrier claim.
Use the Contact page, ensuring to include your order number, contact information, and description of the incorrect or damaged part(s). One of our team members will contact you to correct the issue.

What product warranties doesTrident Trucks offer?
Product warranties are solely offered by product manufacturers. Please refer to the product manufacturer's warranty statement. In the event of a warranty claim,Trident Trucks is available to assist with the manufacturer's required documentation. Please use the Contact page if assistance is required.
Estimated manufacturer order processing times for in-stock items.
 
 Manufacturer Estimated Lead Time
BDS Suspension 1 Week
Rough Country 1-2 Days
Zone Offroad 1-2 Days