-
FREE SHIPPING
-
30 DAY RETURNS
-
LIVE SUPPORT
Rise above it all with this 5" Lift Kit for your truck that gives you clearance for tires up to 36". This kit has everything you need to raise your 4WD 2003 - 2007 Dodge / Ram 1500 Mega Cab / 2500 / 3500 Truck. Are you ready to start turning heads?
**READ IMPORTANT NOTES AND FITMENT SECTIONS BELOW PRIOR TO MAKING PURCHASE**
QUICK SPECS
Front Lift Height | 5" |
Rear Lift Height | 3" |
Front Lift Method | Coil Springs |
Rear Lift Method | Cast Blocks |
Lift Type | Lift Kit |
Wheel Size | 17 x 9 |
Back Spacing | 5" |
Max Tire Size | 36 x 12.5 |
Wheel Size 2 | 18 x 9 |
Back Spacing 2 | 5" |
Max Tire Size 2 | 35 x 12.5 |
Wheel Size 3 | 20 x 9 |
Back Spacing 3 | 5" |
Max Tire Size 3 | 35 x 12.5 |
Finish | Powdercoat |
Metal Cutting Required | No |
Accommodates Factory Wheels | See Notes |
Welding Required | No |
FEATURES
- 100% bolt-on design for easy installation.
- Bump stop extensions properly limit up-travel, protecting your vehicle.
- Heavy-duty upper and lower control arms improve strength and articulation while correcting caster.
- Heavy-duty front track bar bracket correctly positions front axle under vehicle.
- Steering components included to ensure smooth post-installation operation of steering system and factory-consistent vehicle handling characteristics.
IN THE BOX
- All Necessary Mounting / Installation Hardware
- Coil Springs
- Control Arms
- Dropped Pitman Arm
- Rear Lift Block & U-Bolt Kit
- Track Bar Relocation Bracket
IMPORTANT NOTES
- Check Rear Axle Diameter: This truck was produced using rear axles of differing diameters; measure the diameter of your rear axle to ensure proper kit selection in configuration.
- If your Truck has had the steering gear box changed and the sector shaft diameter measures ~1-1/2”-1-5/8” you will need ZOND8404 also with your kit.
- Factory wheels fit when paired with factory / original equipment tire size.
- Fitment: This kit is not designed for dually models, but may me easily adapted to accommodate your truck. Please contact customer support and they will help you find a solution.
- Gas Engine? Gas models may sit slightly taller than the advertised lift height due to lighter weight of engine.
- Kit includes a 3" rear block kit. Measure your truck before ordering to determine the stance of your truck with the lift installed.
- Two-piece rear drive shaft? Add a carrier bearing drop kit to reduce post-lift driveline angles and avoid / eliminate driveshaft vibration.
INSTALLATION
InstructionsClick Here for Installation Guide
Specifications
Install Time Hours | 7 hrs |
Difficulty Level | 3 out of 5 |
(1: Easiest 5: Most Difficult)
FITMENT
- 2003 Dodge Ram 2500 4WD
- 2003 Dodge Ram 3500 4WD
- 2004 Dodge Ram 2500 4WD
- 2004 Dodge Ram 3500 4WD
- 2005 Dodge Ram 2500 4WD
- 2005 Dodge Ram 3500 4WD
- 2006 Dodge Ram 2500 4WD
- 2006 Dodge Ram 3500 4WD
- 2007 Dodge Ram 2500 4WD
- 2007 Dodge Ram 3500 4WD
Rise above it all with this 5" Lift Kit for your truck that gives you clearance for tires up to 36". This kit has everything you need to raise your 4WD 2003 - 2007 Dodge / Ram 1500 Mega Cab / 2500 / 3500 Truck. Are you ready to start turning heads?
**READ IMPORTANT NOTES AND FITMENT SECTIONS BELOW PRIOR TO MAKING PURCHASE**
QUICK SPECS
Front Lift Height | 5" |
Rear Lift Height | 3" |
Front Lift Method | Coil Springs |
Rear Lift Method | Cast Blocks |
Lift Type | Lift Kit |
Wheel Size | 17 x 9 |
Back Spacing | 5" |
Max Tire Size | 36 x 12.5 |
Wheel Size 2 | 18 x 9 |
Back Spacing 2 | 5" |
Max Tire Size 2 | 35 x 12.5 |
Wheel Size 3 | 20 x 9 |
Back Spacing 3 | 5" |
Max Tire Size 3 | 35 x 12.5 |
Finish | Powdercoat |
Metal Cutting Required | No |
Accommodates Factory Wheels | See Notes |
Welding Required | No |
FEATURES
- 100% bolt-on design for easy installation.
- Bump stop extensions properly limit up-travel, protecting your vehicle.
- Heavy-duty upper and lower control arms improve strength and articulation while correcting caster.
- Heavy-duty front track bar bracket correctly positions front axle under vehicle.
- Steering components included to ensure smooth post-installation operation of steering system and factory-consistent vehicle handling characteristics.
IN THE BOX
- All Necessary Mounting / Installation Hardware
- Coil Springs
- Control Arms
- Dropped Pitman Arm
- Rear Lift Block & U-Bolt Kit
- Track Bar Relocation Bracket
IMPORTANT NOTES
- Check Rear Axle Diameter: This truck was produced using rear axles of differing diameters; measure the diameter of your rear axle to ensure proper kit selection in configuration.
- If your Truck has had the steering gear box changed and the sector shaft diameter measures ~1-1/2”-1-5/8” you will need ZOND8404 also with your kit.
- Factory wheels fit when paired with factory / original equipment tire size.
- Fitment: This kit is not designed for dually models, but may me easily adapted to accommodate your truck. Please contact customer support and they will help you find a solution.
- Gas Engine? Gas models may sit slightly taller than the advertised lift height due to lighter weight of engine.
- Kit includes a 3" rear block kit. Measure your truck before ordering to determine the stance of your truck with the lift installed.
- Two-piece rear drive shaft? Add a carrier bearing drop kit to reduce post-lift driveline angles and avoid / eliminate driveshaft vibration.
INSTALLATION
InstructionsClick Here for Installation Guide
Specifications
Install Time Hours | 7 hrs |
Difficulty Level | 3 out of 5 |
(1: Easiest 5: Most Difficult)
FITMENT
- 2003 Dodge Ram 2500 4WD
- 2003 Dodge Ram 3500 4WD
- 2004 Dodge Ram 2500 4WD
- 2004 Dodge Ram 3500 4WD
- 2005 Dodge Ram 2500 4WD
- 2005 Dodge Ram 3500 4WD
- 2006 Dodge Ram 2500 4WD
- 2006 Dodge Ram 3500 4WD
- 2007 Dodge Ram 2500 4WD
- 2007 Dodge Ram 3500 4WD
To check stock levels, use our Live-Chat feature or Contact page. See the Lead Times tab for average order fulfillment times by manufacturer.
Note that some items ship directly from the manufacturer. For these items, the manufacturer may not provide real-time inventory data to Trident Trucks and backorders are possible. If an item is unavailable, Trident Trucks will contact the buyer with an estimated ship date. In the event of excessive manufacturer backorders or delays, Trident Trucks may opt to cancel the order and provide a full refund.
Shipping
Trident Trucks provides shipping within the contiguous 48 states only. For orders outside of this area, please use the Contact page prior to placing your order. Items shipped by ground or LTL generally arrive within 1-5 days from date of shipment. Trident Trucks is not responsible for carrier shipping delays.
Items in their original condition may be returned within 30 days from the date of purchase for a full refund. Items may NOT be returned once packaging has been opened or the item has been installed, otherwise used, or damaged. The buyer is responsible for all return shipping charges. Returns and refunds may be requested through the Contact page.
Note: Do NOT ship items back until you have received a return authorization, as items may be returned to a facility other than their point of origin. Refunds will generally be processed within 48 business hours of receipt at our warehouse in order to allow for inspection and processing.
Use the Contact page, ensuring to include your order number, contact information, items for return, and reason for return. One of our team members will contact you with return shipping details and instructions. Additional information and documentation may be required.
Note: Some items must be returned directly to the manufacturer. Please do not ship items to Trident Trucks prior to return authorization and return instructions.
How do I request a replacement for a missing or damaged part?
Upon receipt, please inspect all orders for completion, accuracy, and damage. If packaging appears to be damaged, ensure to photograph the damage, as this may be required for a shipping carrier claim.
Use the Contact page, ensuring to include your order number, contact information, and description of the incorrect or damaged part(s). One of our team members will contact you to correct the issue.
What product warranties doesTrident Trucks offer?
Product warranties are solely offered by product manufacturers. Please refer to the product manufacturer's warranty statement. In the event of a warranty claim,Trident Trucks is available to assist with the manufacturer's required documentation. Please use the Contact page if assistance is required.
Manufacturer | Estimated Lead Time |
BDS Suspension | 1-2 Days |
Morimoto | 1-2 Days |
ReadyLIFT Suspensions | 1-7 Days |
Rough Country | 1-2 Days |
Zone Offroad | 1-2 Days |