Zone Offroad 4.5" Standard Lift Kit (2013-2018 RAM 3500 4WD Diesel) (ZOND135 / ZOND50) Zone Offroad 4.5" Standard Lift Kit (2013-2018 RAM 3500 4WD Diesel) (ZOND135 / ZOND50) Zone Offroad Take your RAM 3500 to new heights with this 4.5" lift kit from Zone Offroad. Kits include everything needed from full length coil springs and stout radius arm relocation brackets to steering correction and rear lift to level the stance. Get the look, performance, and capability your truck deserves with clearance for up to 37" tires. **READ IMPORTANT NOTES AND FITMENT SECTIONS BELOW PRIOR TO MAKING PURCHASE** QUICK SPECS Front Lift Height 4.5" Rear Lift Height 3" Material Steel Front Lift Method Radius Arm Drop Rear Lift Method Cast Blocks Lift Type Lift Kit Wheel Size 20 x 9 Back Spacing 5.75" Max Tire Size 37 x 12.5 Wheel Size 2 17 x 9 Back Spacing 2 5.75" Max Tire Size 2 37 x 12.5 Wheel Size 3 17 x 9 Back Spacing 3 4.5" Max Tire Size 3 35 x 12.5 Finish Powdercoat Metal Cutting Required No Accommodates Factory Wheels See Notes Welding Required No FEATURES Corrects suspension, steering, and driveline geometry for great on-road handling and improved off-road performance. Full length replacement coil springs add additional ride height while maintaining ride quality. High-strength control arm relocation brackets correct suspension geometry and add rigidity. IN THE BOX All Necessary Mounting / Installation Hardware Bump Stops Coil Springs Dropped Pitman Arm Radius Arm Drop Brackets Rear Lift Block & U-Bolt Kit Sway Bar Relocation Brackets Track Bar Relocation Bracket IMPORTANT NOTES Does NOT work for models with factory rear airbag suspension. This kit is NOT designed for dually models, but may me easily adapted to accommodate your truck. Contact us for options. Driveline Notice: Front driveline vibration may occur at speeds over 35 mph when in 4WD. If this occurs, install the appropriate t-case indexing kit to reduce front driveline angle. Two-piece rear drive shaft? Add a carrier bearing drop kit to reduce post-lift driveline angles and avoid / eliminate driveshaft vibration. INSTALLATION Instructions Click Here for Installation Guide 1 Click Here for Installation Guide 2 Specifications Install Time Hours 5 hrs Difficulty Level 3 out of 5 (1: Easiest 5: Most Difficult) FITMENT 2013 Ram 3500 4WD Diesel 2014 Ram 3500 4WD Diesel 2015 Ram 3500 4WD Diesel 2016 Ram 3500 4WD Diesel 2017 Ram 3500 4WD Diesel 2018 Ram 3500 4WD Diesel

Zone Offroad 4.5" Standard Lift Kit (2013-2018 RAM 3500 4WD Diesel) (ZOND135 / ZOND50)

Code: ZOND135
$762.08
In Stock
  • FREE SHIPPING

  • 30 DAY RETURNS

  • LIVE SUPPORT

Take your RAM 3500 to new heights with this 4.5" lift kit from Zone Offroad. Kits include everything needed from full length coil springs and stout radius arm relocation brackets to steering correction and rear lift to level the stance. Get the look, performance, and capability your truck deserves with clearance for up to 37" tires.

**READ IMPORTANT NOTES AND FITMENT SECTIONS BELOW PRIOR TO MAKING PURCHASE**


QUICK SPECS

Front Lift Height 4.5"
Rear Lift Height 3"
Material Steel
Front Lift Method Radius Arm Drop
Rear Lift Method Cast Blocks
Lift Type Lift Kit
Wheel Size 20 x 9
Back Spacing 5.75"
Max Tire Size 37 x 12.5
Wheel Size 2 17 x 9
Back Spacing 2 5.75"
Max Tire Size 2 37 x 12.5
Wheel Size 3 17 x 9
Back Spacing 3 4.5"
Max Tire Size 3 35 x 12.5
Finish Powdercoat
Metal Cutting Required No
Accommodates Factory Wheels See Notes
Welding Required No

FEATURES

  • Corrects suspension, steering, and driveline geometry for great on-road handling and improved off-road performance.
  • Full length replacement coil springs add additional ride height while maintaining ride quality.
  • High-strength control arm relocation brackets correct suspension geometry and add rigidity.

IN THE BOX

  • All Necessary Mounting / Installation Hardware
  • Bump Stops
  • Coil Springs
  • Dropped Pitman Arm
  • Radius Arm Drop Brackets
  • Rear Lift Block & U-Bolt Kit
  • Sway Bar Relocation Brackets
  • Track Bar Relocation Bracket

IMPORTANT NOTES

  • Does NOT work for models with factory rear airbag suspension.
  • This kit is NOT designed for dually models, but may me easily adapted to accommodate your truck. Contact us for options.
  • Driveline Notice: Front driveline vibration may occur at speeds over 35 mph when in 4WD. If this occurs, install the appropriate t-case indexing kit to reduce front driveline angle.
  • Two-piece rear drive shaft? Add a carrier bearing drop kit to reduce post-lift driveline angles and avoid / eliminate driveshaft vibration.

INSTALLATION

Instructions

Click Here for Installation Guide 1

Click Here for Installation Guide 2

Specifications

Install Time Hours 5 hrs
Difficulty Level 3 out of 5

(1: Easiest 5: Most Difficult)

FITMENT

  • 2013 Ram 3500 4WD Diesel
  • 2014 Ram 3500 4WD Diesel
  • 2015 Ram 3500 4WD Diesel
  • 2016 Ram 3500 4WD Diesel
  • 2017 Ram 3500 4WD Diesel
  • 2018 Ram 3500 4WD Diesel

Take your RAM 3500 to new heights with this 4.5" lift kit from Zone Offroad. Kits include everything needed from full length coil springs and stout radius arm relocation brackets to steering correction and rear lift to level the stance. Get the look, performance, and capability your truck deserves with clearance for up to 37" tires.

**READ IMPORTANT NOTES AND FITMENT SECTIONS BELOW PRIOR TO MAKING PURCHASE**


QUICK SPECS

Front Lift Height 4.5"
Rear Lift Height 3"
Material Steel
Front Lift Method Radius Arm Drop
Rear Lift Method Cast Blocks
Lift Type Lift Kit
Wheel Size 20 x 9
Back Spacing 5.75"
Max Tire Size 37 x 12.5
Wheel Size 2 17 x 9
Back Spacing 2 5.75"
Max Tire Size 2 37 x 12.5
Wheel Size 3 17 x 9
Back Spacing 3 4.5"
Max Tire Size 3 35 x 12.5
Finish Powdercoat
Metal Cutting Required No
Accommodates Factory Wheels See Notes
Welding Required No

FEATURES

  • Corrects suspension, steering, and driveline geometry for great on-road handling and improved off-road performance.
  • Full length replacement coil springs add additional ride height while maintaining ride quality.
  • High-strength control arm relocation brackets correct suspension geometry and add rigidity.

IN THE BOX

  • All Necessary Mounting / Installation Hardware
  • Bump Stops
  • Coil Springs
  • Dropped Pitman Arm
  • Radius Arm Drop Brackets
  • Rear Lift Block & U-Bolt Kit
  • Sway Bar Relocation Brackets
  • Track Bar Relocation Bracket

IMPORTANT NOTES

  • Does NOT work for models with factory rear airbag suspension.
  • This kit is NOT designed for dually models, but may me easily adapted to accommodate your truck. Contact us for options.
  • Driveline Notice: Front driveline vibration may occur at speeds over 35 mph when in 4WD. If this occurs, install the appropriate t-case indexing kit to reduce front driveline angle.
  • Two-piece rear drive shaft? Add a carrier bearing drop kit to reduce post-lift driveline angles and avoid / eliminate driveshaft vibration.

INSTALLATION

Instructions

Click Here for Installation Guide 1

Click Here for Installation Guide 2

Specifications

Install Time Hours 5 hrs
Difficulty Level 3 out of 5

(1: Easiest 5: Most Difficult)

FITMENT

  • 2013 Ram 3500 4WD Diesel
  • 2014 Ram 3500 4WD Diesel
  • 2015 Ram 3500 4WD Diesel
  • 2016 Ram 3500 4WD Diesel
  • 2017 Ram 3500 4WD Diesel
  • 2018 Ram 3500 4WD Diesel
IMPORTANT COVID-19 NOTE: 
Our warehouses are open and continuing to ship orders. However, please note that nearly all automotive parts manufacturers, distribution centers, and logistics centers face backorders and delays in order fulfillment.
 
If an item is unexpectedly out of stock or delayed,  Trident Trucks will make an effort to notify the customer, provide order status updates, and expedite the fulfillment process. If you have any questions pertaining to your order status, please use the Contact link above. We thank you for your patience and understanding.
 
Product Availability

To check stock levels, use our Live-Chat feature or Contact page. See the Lead Times tab for average order fulfillment times by manufacturer.

Note that some items ship directly from the manufacturer. For these items, the manufacturer may not provide real-time inventory data to Trident Trucks and backorders are possible. If an item is unavailable, Trident Trucks will contact the buyer with an estimated ship date. In the event of excessive manufacturer backorders or delays, Trident Trucks may opt to cancel the order and provide a full refund.

Shipping

Trident Trucks provides shipping within the contiguous 48 states only. For orders outside of this area, please use the Contact page prior to placing your order. Items shipped by ground or LTL generally arrive within 1-5 days from date of shipment. Trident Trucks is not responsible for carrier shipping delays.

Returns & Refunds

Items in their original condition may be returned within 30 days from the date of purchase for a full refund. Items may NOT be returned once packaging has been opened or the item has been installed, otherwise used, or damaged. The buyer is responsible for all return shipping charges. Returns and refunds may be requested through the Contact page.

Note: Do NOT ship items back until you have received a return authorization, as items may be returned to a facility other than their point of origin. Refunds will generally be processed within 48 business hours of receipt at our warehouse in order to allow for inspection and processing.

Product Data
Trident Trucks provides product data (including but not limited to item descriptions, important notes, and fitment information) as a courtesy only. This information is provided by product manufacturers and is assumed to be accurate at the time of publishing. Though Trident Trucks may periodically audit and update some product information based upon manufacturer's published data revisions, Trident Trucks does not guarantee the accuracy of any product data. Trident Trucks reserves the right to update product data as necessary and without notice, and will not be held responsible for misprints, or changes/variations made by vehicle manufacturers. Customers should consult the product manufacturer's website for the most up-to-date product data.
 
Markdown & Open Box Items
Markdown and Open Box items are offered at a discount as they have either been overstocked, slightly damaged, and/or returned from a previous customer. Items are sold "as-is." Trident Trucks will indicate any damage found during the inspection process. Please note that this does not guarantee that all defects have been identified. Sales for all items in this category are final. No refunds, exchanges, or replacements are permitted. Some manufacturers may continue to warranty such items; however, the purchaser accepts that some manufacturers may not extend warranties to items in this category. Please refer to the individual product manufacturer's warranty page for details.

F.A.Q.
How do I request a return?
Use the Contact page, ensuring to include your order number, contact information, items for return, and reason for return. One of our team members will contact you with return shipping details and instructions. Additional information and documentation may be required.
Note: Some items must be returned directly to the manufacturer. Please do not ship items to Trident Trucks prior to return authorization and return instructions.

How do I request a replacement for a missing or damaged part?
Upon receipt, please inspect all orders for completion, accuracy, and damage. If packaging appears to be damaged, ensure to photograph the damage, as this may be required for a shipping carrier claim.
Use the Contact page, ensuring to include your order number, contact information, and description of the incorrect or damaged part(s). One of our team members will contact you to correct the issue.

What product warranties doesTrident Trucks offer?
Product warranties are solely offered by product manufacturers. Please refer to the product manufacturer's warranty statement. In the event of a warranty claim,Trident Trucks is available to assist with the manufacturer's required documentation. Please use the Contact page if assistance is required.
Estimated order processing times for in-stock items.
To check stock levels, use our Live-Chat feature or Contact page.
 
 Manufacturer Estimated Lead Time
BDS Suspension
1-2 Days
Morimoto 1-2 Days
ReadyLIFT Suspensions 1-7 Days
Rough Country 1-2 Days
Zone Offroad 1-2 Days