BDS 5.5" Radius Arm Lift Kit (2019-2021 Dodge/RAM 3500 4WD Gas w/o Air-Ride) (1686H) BDS 5.5" Radius Arm Lift Kit (2019-2021 Dodge/RAM 3500 4WD Gas w/o Air-Ride) (1686H) BDS Suspension GAS MODELS ONLY. Select Rear Box Kit based on whether or not your RAM has factory Rear Overload Leaf. BDS Suspension is now shipping complete 5.5" radius arm systems for the 2019+ RAM 3500 4WD gas trucks. Designed to improve the looks and performance of your new RAM, these kits include everything necessary to correctly lift them for improved offroad capability with room for larger tires while maintaining on-road handling. Up front these systems use a pair of (gas specific) progressive rate 5.5" coil springs to provide the extra height and smooth controlled performance in the harshest of terrains. A forged drop pitman arm is supplied to correct steering angles along with a HD bar drop bracket to re-center the front axle. A pair of sway bar drop brackets reposition the OE sway bar for optimal performance along with extended polyurethane bump stops to limit up travel and brake line brackets to allow full droop. To correct the front suspension geometry at the new height a pair of heavy duty replacement radius arms that bolt directly into the factory location. These new radius arms are massive upgrade to the factory stamped units, using tubular construction and a lower cam adjustment to dial in front end caster. Also supplied are your choice of BDS NX2 gas shocks or FOX 2.0 performance series IFP gas shocks for improved ride and performance. At 5.5" of lift it is critical to correct the front driveline angle to maintain use of the 4WD. To do this BDS Suspension provides a heavy duty replacement transmission crossmember as well as a transfer case indexing ring to reposition the front driveline output to allow use of the factory drivelines. In the rear of the RAM 3500 kits a 5" block and u-bolt kit is used for a level-to-slightly tail-high stance while maintaing tow capacity. Finishing out the rear are a matching set of BDS NX2 gas shocks or FOX 2.0 performance series IFP gas shocks. Important Kit Notes 1. Will not fit Cab and Chassis models2. Will NOT fit rear air-ride equipped models3. Gas models only4. Exhaust modification is required to clear front driveshaft. Vehicle can be driven w/o front driveshaft to an exhaust shop.5. Does not fit Dually Models with 8-bolt Transmissions (Aisin)6. Does not work with manual shift transfer cases Specifications Lift Height Front (base kit): 5.5" Coil SpringsRear (base kit): 5" Cast Lift Blocks Tire and Wheel Combinations 37x12.50 w/20x9 and 4.5-5.625" back spacing37x12.50 w/20x9 and 5.625 back spacing*Trimming may be required* Installation Est. Installation: 8 hoursDifficulty Level (easy 1 - 5 complicated): 3 InstructionsClick Here for PDF 1 of 3Click Here for PDF 2 of 3 Click Here for PDF 3 of 3 Vehicle Fitment Data Make Model Type Lift Year Range Dodge / Ram 3500 Truck 4WD w/o Air-Ride 5.5" 2019-2021 Base Kit Components These components are subject to change based upon your selections. Qty Part# Description (1) 012526 19-20 Ram 3500 5in Rear Box 4 3/8" U-bol (1) 012614 2019 Ram 2500/3500 6" Radius Arm Front B (1) 032491 2019-2021 Ram 2500/3500 Coils 4in Diesel (1) 122321 2013-up Ram 2500/3500 Radius Arm Box Kit (1) 122626 2019-2021 Ram 2500/3500 T-Case Index - 6 (2) 85752 NX² Shock Absorber (2) 85761 NX² Shock Absorber

BDS 5.5" Radius Arm Lift Kit (2019-2021 Dodge/RAM 3500 4WD Gas w/o Air-Ride) (1686H)

Code: 1686H
$2,340.35
In Stock
Add to Wishlist Add to Compare
  • SEE DISCOUNT AT CHECKOUT PAGE

  • FREE SHIPPING ON ALL ORDERS

  • 30 DAY RETURNS (SEE ORDER POLICES)

GAS MODELS ONLY.

Select Rear Box Kit based on whether or not your RAM has factory Rear Overload Leaf.

BDS Suspension is now shipping complete 5.5" radius arm systems for the 2019+ RAM 3500 4WD gas trucks.

Designed to improve the looks and performance of your new RAM, these kits include everything necessary to correctly lift them for improved offroad capability with room for larger tires while maintaining on-road handling.

Up front these systems use a pair of (gas specific) progressive rate 5.5" coil springs to provide the extra height and smooth controlled performance in the harshest of terrains. A forged drop pitman arm is supplied to correct steering angles along with a HD bar drop bracket to re-center the front axle. A pair of sway bar drop brackets reposition the OE sway bar for optimal performance along with extended polyurethane bump stops to limit up travel and brake line brackets to allow full droop. To correct the front suspension geometry at the new height a pair of heavy duty replacement radius arms that bolt directly into the factory location. These new radius arms are massive upgrade to the factory stamped units, using tubular construction and a lower cam adjustment to dial in front end caster. Also supplied are your choice of BDS NX2 gas shocks or FOX 2.0 performance series IFP gas shocks for improved ride and performance.

At 5.5" of lift it is critical to correct the front driveline angle to maintain use of the 4WD. To do this BDS Suspension provides a heavy duty replacement transmission crossmember as well as a transfer case indexing ring to reposition the front driveline output to allow use of the factory drivelines. In the rear of the RAM 3500 kits a 5" block and u-bolt kit is used for a level-to-slightly tail-high stance while maintaing tow capacity. Finishing out the rear are a matching set of BDS NX2 gas shocks or FOX 2.0 performance series IFP gas shocks.

Important Kit Notes

1. Will not fit Cab and Chassis models
2. Will NOT fit rear air-ride equipped models
3. Gas models only
4. Exhaust modification is required to clear front driveshaft. Vehicle can be driven w/o front driveshaft to an exhaust shop.
5. Does not fit Dually Models with 8-bolt Transmissions (Aisin)
6. Does not work with manual shift transfer cases

Specifications

Lift Height
Front (base kit): 5.5" Coil Springs
Rear (base kit): 5" Cast Lift Blocks

Tire and Wheel Combinations
37x12.50 w/20x9 and 4.5-5.625" back spacing
37x12.50 w/20x9 and 5.625 back spacing
*Trimming may be required*

Installation

Est. Installation: 8 hours
Difficulty Level (easy 1 - 5 complicated): 3

Instructions
Click Here for PDF 1 of 3
Click Here for PDF 2 of 3
Click Here for PDF 3 of 3


Vehicle Fitment Data

Make Model Type Lift Year Range
Dodge / Ram 3500 Truck 4WD w/o Air-Ride 5.5" 2019-2021

Base Kit Components

These components are subject to change based upon your selections.

Qty Part# Description
(1) 012526 19-20 Ram 3500 5in Rear Box 4 3/8" U-bol
(1) 012614 2019 Ram 2500/3500 6" Radius Arm Front B
(1) 032491 2019-2021 Ram 2500/3500 Coils 4in Diesel
(1) 122321 2013-up Ram 2500/3500 Radius Arm Box Kit
(1) 122626 2019-2021 Ram 2500/3500 T-Case Index - 6
(2) 85752 NX² Shock Absorber
(2) 85761 NX² Shock Absorber

GAS MODELS ONLY.

Select Rear Box Kit based on whether or not your RAM has factory Rear Overload Leaf.

BDS Suspension is now shipping complete 5.5" radius arm systems for the 2019+ RAM 3500 4WD gas trucks.

Designed to improve the looks and performance of your new RAM, these kits include everything necessary to correctly lift them for improved offroad capability with room for larger tires while maintaining on-road handling.

Up front these systems use a pair of (gas specific) progressive rate 5.5" coil springs to provide the extra height and smooth controlled performance in the harshest of terrains. A forged drop pitman arm is supplied to correct steering angles along with a HD bar drop bracket to re-center the front axle. A pair of sway bar drop brackets reposition the OE sway bar for optimal performance along with extended polyurethane bump stops to limit up travel and brake line brackets to allow full droop. To correct the front suspension geometry at the new height a pair of heavy duty replacement radius arms that bolt directly into the factory location. These new radius arms are massive upgrade to the factory stamped units, using tubular construction and a lower cam adjustment to dial in front end caster. Also supplied are your choice of BDS NX2 gas shocks or FOX 2.0 performance series IFP gas shocks for improved ride and performance.

At 5.5" of lift it is critical to correct the front driveline angle to maintain use of the 4WD. To do this BDS Suspension provides a heavy duty replacement transmission crossmember as well as a transfer case indexing ring to reposition the front driveline output to allow use of the factory drivelines. In the rear of the RAM 3500 kits a 5" block and u-bolt kit is used for a level-to-slightly tail-high stance while maintaing tow capacity. Finishing out the rear are a matching set of BDS NX2 gas shocks or FOX 2.0 performance series IFP gas shocks.

Important Kit Notes

1. Will not fit Cab and Chassis models
2. Will NOT fit rear air-ride equipped models
3. Gas models only
4. Exhaust modification is required to clear front driveshaft. Vehicle can be driven w/o front driveshaft to an exhaust shop.
5. Does not fit Dually Models with 8-bolt Transmissions (Aisin)
6. Does not work with manual shift transfer cases

Specifications

Lift Height
Front (base kit): 5.5" Coil Springs
Rear (base kit): 5" Cast Lift Blocks

Tire and Wheel Combinations
37x12.50 w/20x9 and 4.5-5.625" back spacing
37x12.50 w/20x9 and 5.625 back spacing
*Trimming may be required*

Installation

Est. Installation: 8 hours
Difficulty Level (easy 1 - 5 complicated): 3

Instructions
Click Here for PDF 1 of 3
Click Here for PDF 2 of 3
Click Here for PDF 3 of 3


Vehicle Fitment Data

Make Model Type Lift Year Range
Dodge / Ram 3500 Truck 4WD w/o Air-Ride 5.5" 2019-2021

Base Kit Components

These components are subject to change based upon your selections.

Qty Part# Description
(1) 012526 19-20 Ram 3500 5in Rear Box 4 3/8" U-bol
(1) 012614 2019 Ram 2500/3500 6" Radius Arm Front B
(1) 032491 2019-2021 Ram 2500/3500 Coils 4in Diesel
(1) 122321 2013-up Ram 2500/3500 Radius Arm Box Kit
(1) 122626 2019-2021 Ram 2500/3500 T-Case Index - 6
(2) 85752 NX² Shock Absorber
(2) 85761 NX² Shock Absorber

IMPORTANT COVID-19 NOTE: 
Our warehouses are open and continuing to ship orders. However, please note that nearly all automotive parts manufacturers, distribution centers, and logistics centers face backorders and delays in order fulfillment.
 
If an item is unexpectedly out of stock or delayed,  Trident Trucks will make an effort to notify the customer, provide order status updates, and expedite the fulfillment process. If you have any questions pertaining to your order status, please use the Contact link above. We thank you for your patience and understanding.
 
Product Availability

See the Lead Times tab for average order fulfillment times by manufacturer. Note that some items ship directly from the manufacturer. For these items, the manufacturer may not provide real-time inventory data to Trident Trucks and backorders are possible. If an item is unavailable, Trident Trucks will contact the buyer with an estimated in-stock and shipping date. Trident Trucks may issue a full refund in the event of a backordered item.

Shipping

Trident Trucks provides shipping within the continental United States only. For orders outside of this area, please use the Contact page prior to placing your order. Items shipped by ground or LTL generally arrive within 1-5 days from date of shipment. Trident Trucks is not responsible for carrier shipping delays.

Returns & Refunds

Items in their original condition may be returned within 30 days from the date of purchase for a full refund. Items may NOT be returned once packaging has been opened or the item has been installed, otherwise used, or damaged. The buyer is responsible for all return shipping charges. Returns and refunds may be requested through the Contact page.

Note: Do NOT ship items back until you have received a return authorization, as items may be returned to a facility other than their point of origin. Refunds will generally be processed within 48 business hours of receipt at our warehouse in order to allow for inspection and processing.

Product Data
Trident Trucks provides product data (including but not limited to item descriptions, important notes, and fitment information) as a courtesy only. This information is provided by product manufacturers and is assumed to be accurate at the time of publishing. Though Trident Trucks may periodically audit and update some product information based upon manufacturer's published data revisions, Trident Trucks does not guarantee the accuracy of any product data. Trident Trucks reserves the right to update product data as necessary and without notice, and will not be held responsible for misprints, or changes/variations made by vehicle manufacturers. Customers should consult the product manufacturer's website for the most up-to-date product data.
 
Markdown & Open Box Items
Markdown and Open Box items are offered at a discount as they have either been overstocked, slightly damaged, and/or returned from a previous customer. Items are sold "as-is." Trident Trucks will indicate any damage found during the inspection process. Please note that this does not guarantee that all defects have been identified. Sales for all items in this category are final. No refunds, exchanges, or replacements are permitted. Some manufacturers may continue to warranty such items; however, the purchaser accepts that some manufacturers may not extend warranties to items in this category. Please refer to the individual product manufacturer's warranty page for details.

F.A.Q.
How do I request a return?
Use the Contact page, ensuring to include your order number, contact information, items for return, and reason for return. One of our team members will contact you with return shipping details and instructions. Additional information and documentation may be required.
Note: Some items must be returned directly to the manufacturer. Please do not ship items to Trident Trucks prior to return authorization and return instructions.

How do I request a replacement for a missing or damaged part?
Upon receipt, please inspect all orders for completion, accuracy, and damage. If packaging appears to be damaged, ensure to photograph the damage, as this may be required for a shipping carrier claim.
Use the Contact page, ensuring to include your order number, contact information, and description of the incorrect or damaged part(s). One of our team members will contact you to correct the issue.

What product warranties doesTrident Trucks offer?
Product warranties are solely offered by product manufacturers. Please refer to the product manufacturer's warranty statement. In the event of a warranty claim,Trident Trucks is available to assist with the manufacturer's required documentation. Please use the Contact page if assistance is required.
Estimated manufacturer order processing times for in-stock items.
 
 Manufacturer Estimated Lead Time
BDS Suspension 1 Week
Rough Country 1-2 Days
Zone Offroad 1-2 Days